#!/bin/bash
# Copyright 1999-2005 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo/src/livecd-tools/livecd-functions.sh,v 1.17 2005/12/12 19:11:16 wolf31o2 Exp $

# Global Variables:
#    CDBOOT			-- is booting off CD
#    LIVECD_CONSOLE		-- console that is specified to kernel commandline 
#				-- (ttyS0, tty1, etc). Only defined if passed to kernel
#    LIVECD_CONSOLE_BAUD	-- console baudrate specified
#    LIVECD_CONSOLE_PARITY	-- console parity specified
#    LIVECD_CONSOLE_DATABITS	-- console databits specified

source /sbin/functions.sh

livecd_parse_opt() {
	case "$1" in
		*\=*)
			echo "$1" | cut -f2 -d=
		;;
	esac
}

livecd_check_root() {
	if [ "$(whoami)" != "root" ]
	then
		echo "ERROR: must be root to continue"
		return 1
	fi
}

livecd_get_cmdline() {
	echo "0" > /proc/sys/kernel/printk
	CMDLINE="$(cat /proc/cmdline)"
	export CMDLINE
}

no_gl() {
	ewarn "No OpenGL-capable card found."
	echo
	einfo "If you have a card that you know is supported by either the ATI or"
	einfo "NVIDIA binary drivers, please file a bug with the output of lspci"
	einfo "on http://bugs.gentoo.org so we can resolve this."
	GLTYPE=xorg-x11
}

ati_gl() {
	einfo "ATI card detected."
	GLTYPE=ati
}

nv_gl() {
	einfo "NVIDIA card detected."
	GLTYPE=nvidia
}

get_video_cards() {
	[ -x /sbin/lspci ] && VIDEO_CARDS="$(/sbin/lspci | grep VGA)"
	[ -x /usr/sbin/lspci ] && VIDEO_CARDS="$(/usr/sbin/lspci | grep VGA)"
	NUM_CARDS="$(echo ${VIDEO_CARDS} | wc -l)"
	if [ ${NUM_CARDS} -eq 1 ]; then
		NVIDIA=$(echo ${VIDEO_CARDS} | grep "nVidia Corporation")
		ATI=$(echo ${VIDEO_CARDS} | grep "ATI Technologies")
		if [ -n "${NVIDIA}" ]; then
			NVIDIA_CARD=$(echo ${NVIDIA} | awk 'BEGIN {RS=" "} /(NV|nv)[0-9]+/ {print $1}' | cut -d. -f1 | sed 's/ //' | sed 's:[^0-9]::g')
			if [ -n "${NVIDIA_CARD}" ]; then
				if [ $(echo ${NVIDIA_CARD} | cut -dV -f2) -ge 4 ]; then
					nv_gl
				else
					no_gl
				fi
			else
				no_gl
			fi
		elif [ -n "${ATI}" ]; then
			ATI_CARD=$(echo ${ATI} | awk 'BEGIN {RS=" "} /(R|RV|RS)[0-9]+/ {print $1}')
			if [ $(echo ${ATI_CARD} | grep S) ]; then
				ATI_CARD_S=$(echo ${ATI_CARD} | cut -dS -f2)
			elif [ $(echo ${ATI_CARD} | grep V) ]; then
				ATI_CARD_V=$(echo ${ATI_CARD} | cut -dV -f2)
			else
				ATI_CARD=$(echo ${ATI_CARD} | cut -dR -f2)
			fi
			if [ -n "${ATI_CARD_S}" ] && [ ${ATI_CARD_S} -ge 350 ]; then
				ati_gl
			elif [ -n "${ATI_CARD_V}" ] && [ ${ATI_CARD_V} -ge 250 ]; then
				ati_gl
			elif [ -n "${ATI_CARD}" ] && [ ${ATI_CARD} -ge 200 ]; then
				ati_gl
			else
				no_gl
			fi
		else
			no_gl
		fi
	fi
}

livecd_config_wireless() {
	cd /tmp/setup.opts
	dialog --title "SSID" --inputbox "Please enter your SSID, or leave blank for selecting the nearest open network" 20 50 2> ${iface}.SSID
	SSID="$(cat ${iface}.SSID)"
	if [ -n "${SSID}" ]
	then
		dialog --title "WEP (Part 1)" --menu "Does your network use encryption?" 20 60 7 1 "Yes" 2 "No" 2> ${iface}.WEP
		WEP="$(cat ${iface}.WEP)"
		case ${WEP} in
			1)
				dialog --title "WEP (Part 2)" --menu "Are you entering your WEP key in HEX or ASCII?" 20 60 7 1 "HEX" 2 "ASCII" 2> ${iface}.WEPTYPE
				WEP_TYPE="$(cat ${iface}.WEPTYPE)"
				case ${WEP_TYPE} in
					1)
						dialog --title "WEP (Part 3)" --inputbox "Please enter your WEP key in the form of XXXX-XXXX-XX for 64-bit or XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XX for 128-bit" 20 50 2> ${iface}.WEPKEY
						WEP_KEY="$(cat ${iface}.WEPKEY)"
						if [ -n "${WEP_KEY}" -a -x /usr/sbin/iwconfig ]
						then
							/usr/sbin/iwconfig ${iface} essid "${SSID}"
							/usr/sbin/iwconfig ${iface} key "${WEP_KEY}"
						fi
					;;
					2)
						dialog --title "WEP (Part 3)" --inputbox "Please enter your WEP key in ASCII form.  This should be 5 or 13 characters for either 64-bit or 128-bit encryption, repectively" 20 50 2> ${iface}.WEPKEY
						WEP_KEY="$(cat ${iface}.WEPKEY)"
						if [ -n "${WEP_KEY}" -a -x /usr/sbin/iwconfig ]
						then
							/usr/sbin/iwconfig ${iface} essid "${SSID}"
							/usr/sbin/iwconfig ${iface} key "s:${WEP_KEY}"
						fi
					;;
				esac
			;;
			2)
				/usr/sbin/iwconfig ${iface} essid "${SSID}"
				/usr/sbin/iwconfig ${iface} key off
			;;
		esac
	fi
}

livecd_write_wireless_conf() {
	cd /tmp/setup.opts
	SSID="$(cat ${iface}.SSID)"
	if [ -n "${SSID}" ]
	then
		echo "# This wireless configuration file was built by net-setup" > /etc/conf.d/wireless
		WEP="$(cat ${iface}.WEPTYPE)"
		case ${WEP} in
			1)
				WEP_TYPE="$(cat ${iface}.WEPTYPE)"
				if [ -n "${WEP_TYPE}" ]
				then
					WEP_KEY="$(cat ${iface}.WEPKEY)"
					if [ -n "${WEP_KEY}" ]
					then
						SSID_TRANS="$(echo ${SSID//[![:word:]]/_})"
						case ${WEP_TYPE} in
							1)
								echo "key_${SSID_TRANS}=\"${WEP_KEY} enc open\"" >> /etc/conf.d/wireless
							;;
							2)
								echo "key_${SSID_TRANS}=\"s:${WEP_KEY} enc open\"" >> /etc/conf.d/wireless
							;;
						esac
					fi
				fi
			;;
			2)
				:
			;;
		esac
		echo "preferred_aps=( \"${SSID}\" )" >> /etc/conf.d/wireless
		echo "associate_order=\"forcepreferredonly\"" >> /etc/conf.d/wireless
	fi
}

livecd_config_ip() {
	cd /tmp/setup.opts
	dialog --title "TCP/IP setup" --menu "You can use DHCP to automatically configure a network interface or you can specify an IP and related settings manually. Choose one option:" 20 60 7 1 "Use DHCP to auto-detect my network settings" 2 "Specify an IP address manually" 2> ${iface}.DHCP
	DHCP="$(cat ${iface}.DHCP)"
	case ${DHCP} in
		1)
			/sbin/dhcpcd -n -t 10 -h $(hostname) ${iface} &
		;;
		2)
			dialog --title "IP address" --inputbox "Please enter an IP address for ${iface}:" 20 50 "192.168.1.1" 2> ${iface}.IP
			IP="$(cat ${iface}.IP)"
			BC_TEMP="$(echo $IP|cut -d . -f 1).$(echo $IP|cut -d . -f 2).$(echo $IP|cut -d . -f 3).255"
			dialog --title "Broadcast address" --inputbox "Please enter a Broadcast address for ${iface}:" 20 50 "${BC_TEMP}" 2> ${iface}.BC
			BROADCAST="$(cat ${iface}.BC)"
			dialog --title "Network mask" --inputbox "Please enter a Network Mask for ${iface}:" 20 50 "255.255.255.0" 2> ${iface}.NM
			NETMASK="$(cat ${iface}.NM)"
			dialog --title "Gateway" --inputbox "Please enter a Gateway for ${iface} (hit enter for none:)" 20 50 2> ${iface}.GW
			GATEWAY="$(cat ${iface}.GW)"
			dialog --title "DNS server" --inputbox "Please enter a name server to use (hit enter for none:)" 20 50 2> ${iface}.DNS
			DNS="$(cat ${iface}.DNS)"
			/sbin/ifconfig ${iface} ${IP} broadcast ${BROADCAST} netmask ${NETMASK}
			if [ -n "${GATEWAY}" ]
			then
				/sbin/route add default gw ${GATEWAY} dev ${iface} netmask 0.0.0.0 metric 1
			fi
			if [ -n "${DNS}" ]
			then
				dialog --title "DNS Search Suffix" --inputbox "Please enter any domains which you would like to search on DNS queries (hit enter for none:)" 20 50 2> ${iface}.SUFFIX
				SUFFIX="$(cat ${iface}.SUFFIX)"
				echo "nameserver ${DNS}" > /etc/resolv.conf
				if [ -n "${SUFFIX}" ]
				then
					echo "search ${SUFFIX}" >> /etc/resolv.conf
				fi
			fi
		;;
	esac
}

livecd_write_net_conf() {
	cd /tmp/setup.opts
	echo "# This network configuration was written by net-setup" > /etc/conf.d/net
	DHCP="$(cat ${iface}.DHCP)"
	case ${DHCP} in
		1)
			echo "iface_${iface}=\"dhcp\"" >> /etc/conf.d/net
		;;
		2)
			IP="$(cat ${iface}.IP)"
			BROADCAST="$(cat ${iface}.BC)"
			NETMASK="$(cat ${iface}.NM)"
			GATEWAY="$(cat ${iface}.GW)"
			if [ -n "${IP}" -a -n "${BROADCAST}" -a -n "${NETMASK}" ]
			then
				echo "iface_eth0=\"${IP} broadcast ${BROADCAST} netmask ${NETMASK}\"" >> /etc/conf.d/net
				if [ -n "${GATEWAY}" ]
				then
					echo "gateway=\"${iface}/${GATEWAY}\"" >> /etc/conf.d/net
				fi
			fi
		;;
	esac
}

livecd_console_settings() {
	# scan for a valid baud rate
	case "$1" in
		300*)
			LIVECD_CONSOLE_BAUD=300
		;;
		600*)
			LIVECD_CONSOLE_BAUD=600
		;;
		1200*)
			LIVECD_CONSOLE_BAUD=1200
		;;
		2400*)
			LIVECD_CONSOLE_BAUD=2400
		;;
		4800*)
			LIVECD_CONSOLE_BAUD=4800
		;;
		9600*)
			LIVECD_CONSOLE_BAUD=9600
		;;
		14400*)
			LIVECD_CONSOLE_BAUD=14400
		;;
		19200*)
			LIVECD_CONSOLE_BAUD=19200
		;;
		28800*)
			LIVECD_CONSOLE_BAUD=28800
		;;
		38400*)
			LIVECD_CONSOLE_BAUD=38400
		;;
		57600*)
			LIVECD_CONSOLE_BAUD=57600
		;;
		115200*)
			LIVECD_CONSOLE_BAUD=115200
		;;
	esac
	if [ "${LIVECD_CONSOLE_BAUD}" = "" ]
	then
		# If it's a virtual console, set baud to 38400, if it's a serial
		# console, set it to 9600 (by default anyhow)
		case ${LIVECD_CONSOLE} in 
			tty[0-9])
				LIVECD_CONSOLE_BAUD=38400
			;;
			*)
				LIVECD_CONSOLE_BAUD=9600
			;;
		esac
	fi
	export LIVECD_CONSOLE_BAUD

	# scan for a valid parity
	# If the second to last byte is a [n,e,o] set parity
	local parity
	parity=$(echo $1 | rev | cut -b 2-2)
	case "$parity" in
		[neo])
			LIVECD_CONSOLE_PARITY=$parity
		;;
	esac
	export LIVECD_CONSOLE_PARITY	

	# scan for databits
	# Only set databits if second to last character is parity
	if [ "${LIVECD_CONSOLE_PARITY}" != "" ]
	then
		LIVECD_CONSOLE_DATABITS=$(echo $1 | rev | cut -b 1)
	fi
	export LIVECD_CONSOLE_DATABITS
	return 0
}

livecd_read_commandline() {
	livecd_get_cmdline || return 1

	for x in ${CMDLINE}
	do
		case "${x}" in
			cdroot)
				CDBOOT="yes"
				export CDBOOT
			;;
			cdroot\=*)
				CDBOOT="yes"
				export CDBOOT
			;;
			console\=*)
				local live_console
				live_console=$(livecd_parse_opt "${x}")

				# Parse the console line. No options specified if
				# no comma
				LIVECD_CONSOLE=$(echo ${live_console} | cut -f1 -d,)
				if [ "${LIVECD_CONSOLE}" = "" ]
				then
					# no options specified
					LIVECD_CONSOLE=${live_console}
				else
					# there are options, we need to parse them
					local livecd_console_opts
					livecd_console_opts=$(echo ${live_console} | cut -f2 -d,)
					livecd_console_settings  ${livecd_console_opts}
				fi
				export LIVECD_CONSOLE
			;;
		esac
	done
	return 0
}

livecd_fix_inittab() {
	if [ "${CDBOOT}" = "" ]
	then
		return 1
	fi

	# Create a backup
	cp -f /etc/inittab /etc/inittab.old

	# Comment out current getty settings
	sed -i -e '/^c[0-9]/ s/^/#/' /etc/inittab

	# SPARC & HPPA console magic
	if [ "${HOSTTYPE}" = "sparc" -o "${HOSTTYPE}" = "hppa" -o "${HOSTTYPE}" = "ppc64" ]
	then
		# Mount openprom tree for user debugging purposes
		if [ "${HOSTTYPE}" = "sparc" ]
		then
			mount -t openpromfs none /proc/openprom
		fi

		# SPARC serial port A, HPPA mux / serial
		if [ -c "/dev/tts/0" ]
		then
			LIVECD_CONSOLE_BAUD=$(stty -F /dev/tts/0 speed)
			echo "s0:12345:respawn:/sbin/agetty -nl /bin/bashlogin ${LIVECD_CONSOLE_BAUD} tts/0 vt100" >> /etc/inittab
		fi
		# HPPA software PDC console (K-models)
		if [ "${LIVECD_CONSOLE}" = "ttyB0" ]
		then
			mknod /dev/ttyB0 c 11 0
			LIVECD_CONSOLE_BAUD=$(stty -F /dev/ttyB0 speed)
			echo "b0:12345:respawn:/sbin/agetty -nl /bin/bashlogin ${LIVECD_CONSOLE_BAUD} ttyB0 vt100" >> /etc/inittab
		fi
		# FB / STI console
		if [ -c "/dev/vc/1" ]
		then
			MODEL_NAME=$(cat /proc/cpuinfo |grep "model name"|sed 's/.*: //')
			if [ "${MODEL_NAME}" = "UML" ]
			then
			    for x in 0 1 2 3 4 5 6
			    do
				    echo "c${x}:12345:respawn:/sbin/mingetty --noclear --autologin root tty${x}" >> /etc/inittab
			    done
			else
			    for x in 1 2 3 4 5 6
			    do
				    echo "c${x}:12345:respawn:/sbin/mingetty --noclear --autologin root tty${x}" >> /etc/inittab
			    done
			fi
		fi
		if [ -c "/dev/hvc0" ]
		then
			einfo "Adding hvc console to inittab"
			echo "s0:12345:respawn:/sbin/agetty -nl /bin/bashlogin 9600 hvc0 vt320" >> /etc/inittab
		fi


	# The rest...
	else
		if [ "${LIVECD_CONSOLE}" = "tty0" -o "${LIVECD_CONSOLE}" = "" ]
		then
			for x in 1 2 3 4 5 6
			do
				echo "c${x}:12345:respawn:/sbin/agetty -nl /bin/bashlogin 38400 tty${x} linux" >> /etc/inittab
			done
		else
			einfo "Adding ${LIVECD_CONSOLE} console to inittab"
			echo "s0:12345:respawn:/sbin/agetty -nl /bin/bashlogin ${LIVECD_CONSOLE_BAUD} ${LIVECD_CONSOLE} vt100" >> /etc/inittab
		fi
	fi

	# EFI-based machines should automatically hook up their console lines
	if dmesg | grep -q '^Adding console on'
	then
		dmesg | grep '^Adding console on' | while read x; do
			line=`echo "$x" | cut -d' ' -f4`
			id=e`echo "$line" | grep -o '.\{1,3\}$'`
			[ "${line}" = "${LIVECD_CONSOLE}" ] && continue  # already setup above
			case "$x" in
				*options\ \'[0-9]*) speed=`echo "$x" | sed "s/.*options '//; s/[^0-9].*//"` ;;
				*) speed=9600 ;;  # choose a default, only matters if it is serial
			esac
			echo "$id:12345:respawn:/sbin/agetty -nl /bin/bashlogin ${speed} ${line} vt100" >> /etc/inittab
		done
	fi

	# force reread of inittab
	kill -HUP 1
	return 0
}