diff options
author | Michał Górny <mgorny@gentoo.org> | 2019-09-11 10:34:05 +0200 |
---|---|---|
committer | Michał Górny <mgorny@gentoo.org> | 2019-09-12 16:28:29 +0200 |
commit | b8e7ebb0d37f790bfb325d2bf4aa423dad0fb1b2 (patch) | |
tree | 95b9917c8123582970e5d25470646470d2030149 /sys-apps/lm_sensors | |
parent | sys-apps/lm_sensors: Inline PN as appropriate before renaming (diff) | |
download | gentoo-b8e7ebb0d37f790bfb325d2bf4aa423dad0fb1b2.tar.gz gentoo-b8e7ebb0d37f790bfb325d2bf4aa423dad0fb1b2.tar.bz2 gentoo-b8e7ebb0d37f790bfb325d2bf4aa423dad0fb1b2.zip |
Rename sys-apps/{lm_sensors → lm-sensors}, to match upstream
Signed-off-by: Michał Górny <mgorny@gentoo.org>
Diffstat (limited to 'sys-apps/lm_sensors')
-rw-r--r-- | sys-apps/lm_sensors/Manifest | 2 | ||||
-rw-r--r-- | sys-apps/lm_sensors/files/fancontrol.confd | 16 | ||||
-rw-r--r-- | sys-apps/lm_sensors/files/fancontrol.initd | 21 | ||||
-rw-r--r-- | sys-apps/lm_sensors/files/fancontrol.service-r1 | 9 | ||||
-rw-r--r-- | sys-apps/lm_sensors/files/lm_sensors-3.4.0-sensors-detect-gentoo.patch | 342 | ||||
-rw-r--r-- | sys-apps/lm_sensors/files/lm_sensors-3.5.0-sensors-detect-gentoo.patch | 347 | ||||
-rw-r--r-- | sys-apps/lm_sensors/files/lm_sensors.confd | 4 | ||||
-rw-r--r-- | sys-apps/lm_sensors/files/lm_sensors.initd | 21 | ||||
-rw-r--r-- | sys-apps/lm_sensors/files/sensord.confd | 19 | ||||
-rw-r--r-- | sys-apps/lm_sensors/files/sensord.initd | 19 | ||||
-rw-r--r-- | sys-apps/lm_sensors/files/sensord.service-r1 | 9 | ||||
-rw-r--r-- | sys-apps/lm_sensors/lm_sensors-3.5.0.ebuild | 218 | ||||
-rw-r--r-- | sys-apps/lm_sensors/lm_sensors-3.5.0_p20190505.ebuild | 218 | ||||
-rw-r--r-- | sys-apps/lm_sensors/metadata.xml | 31 |
14 files changed, 0 insertions, 1276 deletions
diff --git a/sys-apps/lm_sensors/Manifest b/sys-apps/lm_sensors/Manifest deleted file mode 100644 index 727cc20c9292..000000000000 --- a/sys-apps/lm_sensors/Manifest +++ /dev/null @@ -1,2 +0,0 @@ -DIST lm_sensors-3.5.0.tar.gz 267133 BLAKE2B f8fe8efe19cd17f2c828404bee7b2b285118279f06aaa2ebf831823d6767865a2b19da7bede1f3b43b2664ae3cec41b9e840be24fa673472fe577d38f602da4e SHA512 bea9b2ac01bc43622cafdce0b00ac3bb8cb2d818449c8b332ab51e7ad0022b66bcbf6ca1e99c8500bdc6092c5c1ef985bfe7cff05dbcf015bd3ccf58c00a72e1 -DIST lm_sensors-3.5.0_p20190505.tar.gz 269694 BLAKE2B 6d665b8cbf83b26786686c5000dcac139aac930f691bac9053173dfcb92b6320afeb2f9b5ba6305cba643ff8cde356ef9e6772948d0f618cb3f5a48b3b5396f2 SHA512 15e3c50a9f00d284995f1ae34ef38e1ce314acb0c15d4996002287fadcf89a6f066058838c74c2b2bbec2628a3e5b9e8e010b0f5139641ee5336ac061cb33353 diff --git a/sys-apps/lm_sensors/files/fancontrol.confd b/sys-apps/lm_sensors/files/fancontrol.confd deleted file mode 100644 index a7169583173e..000000000000 --- a/sys-apps/lm_sensors/files/fancontrol.confd +++ /dev/null @@ -1,16 +0,0 @@ -# /etc/conf.d/fancontrol - -# Configuration file -#FANCONTROL_CONFIGFILE="/etc/fancontrol" - -# You can use this configuration option to pass additional options to the -# start-stop-daemon, see start-stop-daemon(8) for more details. -# Per default we forces fancontrol into background and wait 1000ms after we -# have started the service to ensure that the daemon is really up and -# running. -#FANCONTROL_SSDARGS="--background --wait 1000" - -# The termination timeout (start-stop-daemon parameter "retry") ensures -# that the service will be terminated within a given time (60 + 5 seconds -# per default) when you are stopping the service. -#FANCONTROL_TERMTIMEOUT="TERM/60/KILL/5" diff --git a/sys-apps/lm_sensors/files/fancontrol.initd b/sys-apps/lm_sensors/files/fancontrol.initd deleted file mode 100644 index 0734668a4c0a..000000000000 --- a/sys-apps/lm_sensors/files/fancontrol.initd +++ /dev/null @@ -1,21 +0,0 @@ -#!/sbin/openrc-run -# Copyright 1999-2016 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -FANCONTROL_CONFIGFILE=${FANCONTROL_CONFIGFILE:-"/etc/fancontrol"} -FANCONTROL_SSDARGS=${FANCONTROL_SSDARGS:-"--background --wait 1000"} -FANCONTROL_TERMTIMEOUT=${FANCONTROL_TERMTIMEOUT:-"TERM/60/KILL/5"} - - -command="/usr/sbin/fancontrol" -command_args="${FANCONTROL_CONFIGFILE}" -start_stop_daemon_args="${FANCONTROL_SSDARGS}" -pidfile="/run/fancontrol.pid" -retry="${FANCONTROL_TERMTIMEOUT}" - -required_files="${FANCONTROL_CONFIGFILE}" - -depend() { - need localmount - use lm_sensors -} diff --git a/sys-apps/lm_sensors/files/fancontrol.service-r1 b/sys-apps/lm_sensors/files/fancontrol.service-r1 deleted file mode 100644 index 7d4342c30171..000000000000 --- a/sys-apps/lm_sensors/files/fancontrol.service-r1 +++ /dev/null @@ -1,9 +0,0 @@ -[Unit] -Description=Fan control daemon - -[Service] -PIDFile=/run/fancontrol.pid -ExecStart=/usr/sbin/fancontrol - -[Install] -WantedBy=multi-user.target diff --git a/sys-apps/lm_sensors/files/lm_sensors-3.4.0-sensors-detect-gentoo.patch b/sys-apps/lm_sensors/files/lm_sensors-3.4.0-sensors-detect-gentoo.patch deleted file mode 100644 index dd77d66c0855..000000000000 --- a/sys-apps/lm_sensors/files/lm_sensors-3.4.0-sensors-detect-gentoo.patch +++ /dev/null @@ -1,342 +0,0 @@ -From d8603c540cfccda5e011060083108de8f1b820ab Mon Sep 17 00:00:00 2001 -From: Thomas Deutschmann <whissi@gentoo.org> -Date: Tue, 9 Aug 2016 01:19:16 +0200 -Subject: [PATCH 1/3] sensors-detect: Add sd_boot detection - -We need to know in write_config function wether the system is using systemd -or not. ---- - prog/detect/sensors-detect | 6 +++++- - 1 file changed, 5 insertions(+), 1 deletion(-) - -diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect -index 057cd96..e29ab4c 100755 ---- a/prog/detect/sensors-detect -+++ b/prog/detect/sensors-detect -@@ -2746,7 +2746,7 @@ sub isa_read_i5d6 - # AUTODETECTION # - ################# - --use vars qw($dev_i2c $sysfs_root $systemd_systemctl $systemd_system_dir); -+use vars qw($dev_i2c $sysfs_root $systemd_is_booted $systemd_systemctl $systemd_system_dir); - - sub initialize_conf - { -@@ -2820,6 +2820,10 @@ sub initialize_conf - } elsif (-d "/lib/systemd/system") { - $systemd_system_dir = "/lib/systemd/system"; - } -+ -+ # Check whether the system was booted using systemd. -+ # See: man sd_booted -+ $systemd_is_booted = -d '/run/systemd/system'; - } - - # [0] -> VERSION --- -2.9.3 - - -From 14376e837c4a666fe2088bc7b7fbb90a4520f387 Mon Sep 17 00:00:00 2001 -From: Thomas Deutschmann <whissi@gentoo.org> -Date: Tue, 9 Aug 2016 01:25:52 +0200 -Subject: [PATCH 2/3] sensors-detect: write_config function adjusted for Gentoo - environment - -Bug: https://bugs.gentoo.org/480018 ---- - prog/detect/sensors-detect | 133 +++++++++++++++++++++------------------------ - 1 file changed, 62 insertions(+), 71 deletions(-) - -diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect -index e29ab4c..bb5ae0f 100755 ---- a/prog/detect/sensors-detect -+++ b/prog/detect/sensors-detect -@@ -7079,6 +7079,9 @@ sub write_config - { - my ($configfile, $bus_modules, $hwmon_modules) = @_; - -+ my $have_conffiles_created = 0; -+ -+ # /etc/modprobe.d handling - if (defined $configfile) { - my $have_modprobe_d = -d '/etc/modprobe.d'; - printf "Do you want to \%s /etc/modprobe.d/lm_sensors.conf? (\%s): ", -@@ -7087,96 +7090,84 @@ sub write_config - $_ = read_answer(); - if (($have_modprobe_d and not m/^\s*n/i) or m/^\s*y/i) { - unless ($have_modprobe_d) { -- mkdir('/etc/modprobe.d', 0777) -+ mkdir('/etc/modprobe.d', 0755) - or die "Sorry, can't create /etc/modprobe.d ($!)"; - } -- open(local *MODPROBE_D, ">/etc/modprobe.d/lm_sensors.conf") -+ open(local *MODPROBE_D, ">", $have_modprobe_d . '/lm_sensors.conf') - or die "Sorry, can't create /etc/modprobe.d/lm_sensors.conf ($!)"; - print MODPROBE_D "# Generated by sensors-detect on " . scalar localtime() . "\n"; - print MODPROBE_D $configfile; - close(MODPROBE_D); -+ $have_conffiles_created++; - } else { - print "To make the sensors modules behave correctly, add these lines to\n". -- "/etc/modprobe.conf:\n\n"; -+ "/etc/modprobe.d/lm_sensors.conf:\n\n"; - print "#----cut here----\n". - $configfile. - "#----cut here----\n\n"; - } - } - -- my $have_sysconfig = -d '/etc/sysconfig'; -- printf "Do you want to \%s /etc/sysconfig/lm_sensors? (\%s): ", -- (-e '/etc/sysconfig/lm_sensors' ? 'overwrite' : 'generate'), -- ($have_sysconfig ? 'YES/no' : 'yes/NO'); -- $_ = read_answer(); -- if (($have_sysconfig and not m/^\s*n/i) or m/^\s*y/i) { -- unless ($have_sysconfig) { -- mkdir('/etc/sysconfig', 0777) -- or die "Sorry, can't create /etc/sysconfig ($!)"; -- } -- open(local *SYSCONFIG, ">/etc/sysconfig/lm_sensors") -- or die "Sorry, can't create /etc/sysconfig/lm_sensors ($!)"; -- print SYSCONFIG "# Generated by sensors-detect on " . scalar localtime() . "\n"; -- print SYSCONFIG <<'EOT'; --# This file is sourced by /etc/init.d/lm_sensors and defines the modules to --# be loaded/unloaded. --# --# The format of this file is a shell script that simply defines variables: --# HWMON_MODULES for hardware monitoring driver modules, and optionally --# BUS_MODULES for any required bus driver module (for example for I2C or SPI). -- --EOT -- print SYSCONFIG "BUS_MODULES=\"", join(" ", @{$bus_modules}), "\"\n" -- if @{$bus_modules}; -- print SYSCONFIG "HWMON_MODULES=\"", join(" ", @{$hwmon_modules}), "\"\n"; -- close(SYSCONFIG); -- -- if ($systemd_systemctl && $systemd_system_dir) { -- if (-f "$systemd_system_dir/lm_sensors.service") { -- system($systemd_systemctl, "enable", "lm_sensors.service"); -- system($systemd_systemctl, "start", "lm_sensors.service"); -- # All done, don't check for /etc/init.d/lm_sensors -- } else { -- print "Copy prog/init/lm_sensors.service to $systemd_system_dir\n". -- "and run 'systemctl enable lm_sensors.service'\n". -- "for initialization at boot time.\n"; -- } -- return; -+ # /etc/modules-load.d handling -+ my $modulesload_filedir = '/etc/modules-load.d'; -+ my $modulesload_file = $modulesload_filedir . '/lm_sensors.conf'; -+ my $modulesload_cfg = "# Generated by sensors-detect on " . scalar localtime() . "\n" -+ . join("\n", (@{$bus_modules}, @{$hwmon_modules})) . "\n"; -+ -+ my $have_modulesload_file = -f $modulesload_file; -+ printf "Do you want to \%s '$modulesload_file'? (\%s): ", -+ ($have_modulesload_file ? 'overwrite' : 'generate'), -+ ($have_modulesload_file ? 'yes/NO' : 'YES/no'); -+ -+ my $input = read_answer(); -+ chomp($input); -+ if ($input eq '' && $have_modulesload_file) { -+ $input = 'no'; -+ } -+ elsif ($input eq '' && !$have_modulesload_file) { -+ $input = 'yes'; -+ } -+ -+ if ($input =~ m/^\s*y/i) { -+ unless (-d $modulesload_filedir) { -+ mkdir($modulesload_filedir, 0755) -+ or die "Sorry, can't create '$modulesload_filedir' ($!)"; - } - -- print "Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors\n". -- "for initialization at boot time.\n" -- unless -f "/etc/init.d/lm_sensors"; -+ open(my $fh, '>', $modulesload_file) -+ or die "Sorry, can't open '$modulesload_file' for writing! ($!)"; - -- if (-x "/sbin/insserv" && -f "/etc/init.d/lm_sensors") { -- system("/sbin/insserv", "/etc/init.d/lm_sensors"); -- } elsif (-x "/sbin/chkconfig" && -f "/etc/init.d/lm_sensors") { -- system("/sbin/chkconfig", "lm_sensors", "on"); -- if (-x "/sbin/service") { -- system("/sbin/service", "lm_sensors", "start"); -- } -+ print $fh $modulesload_cfg; -+ close($fh); -+ -+ $have_conffiles_created++; -+ } -+ else { -+ print "\nPlease create '$modulesload_file' with the following content\n" -+ . "to allow modules-load service to autoload modules on boot:\n\n"; -+ print "#----cut here----\n" -+ . "# Generated by sensors-detect on " . scalar localtime() . "\n" -+ . join("\n", (@{$bus_modules}, @{$hwmon_modules})) . "\n" -+ . "#----cut here----\n\n"; -+ } -+ -+ if ($have_conffiles_created) { -+ printf "\nNote: You only have created the required configuration to autoload the\n" -+ . "required modules to use your sensors on boot. If you want to start using\n" -+ . "your sensors right now you have to either load them now once manually, to\n" -+ . "reboot this system or to execute the following command(s):\n\n"; -+ -+ if ($systemd_is_booted) { -+ print " # systemctl restart systemd-modules-load\n\n" - } else { -- print "You should now start the lm_sensors service to load the required\n". -- "kernel modules.\n\n"; -- } -- } else { -- print "To load everything that is needed, add this to one of the system\n". -- "initialization scripts (e.g. /etc/rc.d/rc.local):\n\n"; -- print "#----cut here----\n"; -- if (@{$bus_modules}) { -- print "# Adapter drivers\n"; -- print "modprobe $_\n" foreach (@{$bus_modules}); -+ print " # /etc/init.d/modules-load restart\n\n" - } -- print "# Chip drivers\n"; -- print "modprobe $_\n" foreach (@{$hwmon_modules}); -- print((-e '/usr/bin/sensors' ? -- "/usr/bin/sensors -s\n" : -- "/usr/local/bin/sensors -s\n"). -- "#----cut here----\n\n"); -- -- print "You really should try these commands right now to make sure everything\n". -- "is working properly. Monitoring programs won't work until the needed\n". -- "modules are loaded.\n\n"; -+ } -+ else { -+ print "\nNote: Please make sure the following modules are loaded when you\n" -+ . "want to make use of your sensors:\n\n"; -+ -+ print " " . join(" ", (@{$bus_modules}, @{$hwmon_modules})) . "\n\n"; - } - } - --- -2.9.3 - - -From 59680d1fd41402efb547ca75ad8397089df2e059 Mon Sep 17 00:00:00 2001 -From: Thomas Deutschmann <whissi@gentoo.org> -Date: Mon, 29 Aug 2016 12:47:50 +0200 -Subject: [PATCH 3/3] sensors-detect: Add Gentoo config file protection - -Per default we don't modify live config file. Instead we create -"._cfg0000_<filename>" files known from emerge when using CONFIG PROTECT. - -See CONFIGURATION FILES section of emerge(1) man page for details. - -Can be disabled using the "--no-gentoo-config-protect" parameter. ---- - prog/detect/sensors-detect | 51 +++++++++++++++++++++++++++++++++++++++++++--- - 1 file changed, 48 insertions(+), 3 deletions(-) - -diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect -index bb5ae0f..2cc8f88 100755 ---- a/prog/detect/sensors-detect -+++ b/prog/detect/sensors-detect -@@ -7093,7 +7093,7 @@ sub write_config - mkdir('/etc/modprobe.d', 0755) - or die "Sorry, can't create /etc/modprobe.d ($!)"; - } -- open(local *MODPROBE_D, ">", $have_modprobe_d . '/lm_sensors.conf') -+ open(local *MODPROBE_D, ">", gentoo_get_protected_file($have_modprobe_d . '/lm_sensors.conf')) - or die "Sorry, can't create /etc/modprobe.d/lm_sensors.conf ($!)"; - print MODPROBE_D "# Generated by sensors-detect on " . scalar localtime() . "\n"; - print MODPROBE_D $configfile; -@@ -7134,7 +7134,7 @@ sub write_config - or die "Sorry, can't create '$modulesload_filedir' ($!)"; - } - -- open(my $fh, '>', $modulesload_file) -+ open(my $fh, '>', gentoo_get_protected_file($modulesload_file)) - or die "Sorry, can't open '$modulesload_file' for writing! ($!)"; - - print $fh $modulesload_cfg; -@@ -7152,10 +7152,17 @@ sub write_config - } - - if ($have_conffiles_created) { -+ if (!$opt{no_gentoo_config_protect}) { -+ print "\n * IMPORTANT: At least $have_conffiles_created config file(s) in '/etc' need updating.\n" -+ . " * See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS\n" -+ . " * sections of the emerge man page to learn how to update config files.\n"; -+ } -+ - printf "\nNote: You only have created the required configuration to autoload the\n" - . "required modules to use your sensors on boot. If you want to start using\n" - . "your sensors right now you have to either load them now once manually, to\n" -- . "reboot this system or to execute the following command(s):\n\n"; -+ . "reboot this system or to execute the following command(s)\%s:\n\n", -+ ($opt{no_gentoo_config_protect} ? "" : " _AFTER_\nyou have updated your config files"); - - if ($systemd_is_booted) { - print " # systemctl restart systemd-modules-load\n\n" -@@ -7171,6 +7178,32 @@ sub write_config - } - } - -+sub gentoo_get_protected_file -+{ -+ my ($file) = @_; -+ -+ if ($opt{no_gentoo_config_protect}) { -+ return $file; -+ } -+ -+ my $basename = basename($file); -+ my $dirname = dirname($file); -+ -+ my $protected_file; -+ for (my $prot_num = 0; $prot_num <= 9999; $prot_num++) { -+ $protected_file = sprintf('%s/._cfg%s_%s', -+ $dirname, -+ sprintf("%0*d", 4, $prot_num), -+ $basename); -+ -+ if (! -f $protected_file) { -+ return $protected_file; -+ } -+ } -+ -+ die "Running out of files -- cannot create protected file '$file'" -+} -+ - sub main - { - my ($input, $superio_features); -@@ -7181,6 +7214,8 @@ sub main - $opt{stat} = 1; - } elsif ($ARGV[0] eq "--auto") { - $opt{auto} = 1; -+ } elsif ($ARGV[0] eq "--no-gentoo-config-protect") { -+ $opt{no_gentoo_config_protect} = 1; - } else { - print STDERR "Error: unknown option $ARGV[0]\n"; - exit 1; -@@ -7234,6 +7269,16 @@ sub main - "unless you know what you're doing.\n\n"; - } - -+ if (!$opt{no_gentoo_config_protect}) { -+ print "Gentoo config file protection is active. Every file this program will\n", -+ "modify must be merged before the change will become active using\n", -+ "default Gentoo tools such as dispatch-conf, cfg-update, and etc-update.\n\n"; -+ } -+ else { -+ print "Gentoo config file protection is _disabled_. This program will modify\n", -+ "your active configuration without backups.\n\n"; -+ } -+ - print "Some south bridges, CPUs or memory controllers contain embedded sensors.\n". - "Do you want to scan for them? This is totally safe. (YES/no): "; - $input = read_answer(); --- -2.9.3 - diff --git a/sys-apps/lm_sensors/files/lm_sensors-3.5.0-sensors-detect-gentoo.patch b/sys-apps/lm_sensors/files/lm_sensors-3.5.0-sensors-detect-gentoo.patch deleted file mode 100644 index 3fcd19c05c4f..000000000000 --- a/sys-apps/lm_sensors/files/lm_sensors-3.5.0-sensors-detect-gentoo.patch +++ /dev/null @@ -1,347 +0,0 @@ -From eed538e59a63eaacae67d7bfdd95a19e18dad1a5 Mon Sep 17 00:00:00 2001 -From: Thomas Deutschmann <whissi@gentoo.org> -Date: Tue, 9 Aug 2016 01:19:16 +0200 -Subject: [PATCH 1/3] sensors-detect: Add sd_boot detection - -We need to know in write_config function wether the system is using systemd -or not. - -Signed-off-by: Thomas Deutschmann <whissi@gentoo.org> ---- - prog/detect/sensors-detect | 6 +++++- - 1 file changed, 5 insertions(+), 1 deletion(-) - -diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect -index 5c771485..ea1c0d53 100755 ---- a/prog/detect/sensors-detect -+++ b/prog/detect/sensors-detect -@@ -2976,7 +2976,7 @@ sub isa_read_i5d6 - # AUTODETECTION # - ################# - --use vars qw($dev_i2c $sysfs_root $systemd_systemctl $systemd_system_dir); -+use vars qw($dev_i2c $sysfs_root $systemd_is_booted $systemd_systemctl $systemd_system_dir); - - sub initialize_conf - { -@@ -3050,6 +3050,10 @@ sub initialize_conf - } elsif (-d "/lib/systemd/system") { - $systemd_system_dir = "/lib/systemd/system"; - } -+ -+ # Check whether the system was booted using systemd. -+ # See: man sd_booted -+ $systemd_is_booted = -d '/run/systemd/system'; - } - - # [0] -> VERSION --- -2.21.0 - - -From bad0d73c98c9167ec4ade01c6b75159643d237f1 Mon Sep 17 00:00:00 2001 -From: Thomas Deutschmann <whissi@gentoo.org> -Date: Tue, 9 Aug 2016 01:25:52 +0200 -Subject: [PATCH 2/3] sensors-detect: write_config function adjusted for Gentoo - environment - -Bug: https://bugs.gentoo.org/480018 -Signed-off-by: Thomas Deutschmann <whissi@gentoo.org> ---- - prog/detect/sensors-detect | 133 +++++++++++++++++-------------------- - 1 file changed, 62 insertions(+), 71 deletions(-) - -diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect -index ea1c0d53..1e8ac00d 100755 ---- a/prog/detect/sensors-detect -+++ b/prog/detect/sensors-detect -@@ -7338,6 +7338,9 @@ sub write_config - { - my ($configfile, $bus_modules, $hwmon_modules) = @_; - -+ my $have_conffiles_created = 0; -+ -+ # /etc/modprobe.d handling - if (defined $configfile) { - my $have_modprobe_d = -d '/etc/modprobe.d'; - printf "Do you want to \%s /etc/modprobe.d/lm_sensors.conf? (\%s): ", -@@ -7346,96 +7349,84 @@ sub write_config - $_ = read_answer(); - if (($have_modprobe_d and not m/^\s*n/i) or m/^\s*y/i) { - unless ($have_modprobe_d) { -- mkdir('/etc/modprobe.d', 0777) -+ mkdir('/etc/modprobe.d', 0755) - or die "Sorry, can't create /etc/modprobe.d ($!)"; - } -- open(local *MODPROBE_D, ">/etc/modprobe.d/lm_sensors.conf") -+ open(local *MODPROBE_D, ">", $have_modprobe_d . '/lm_sensors.conf') - or die "Sorry, can't create /etc/modprobe.d/lm_sensors.conf ($!)"; - print MODPROBE_D "# Generated by sensors-detect on " . scalar localtime() . "\n"; - print MODPROBE_D $configfile; - close(MODPROBE_D); -+ $have_conffiles_created++; - } else { - print "To make the sensors modules behave correctly, add these lines to\n". -- "/etc/modprobe.conf:\n\n"; -+ "/etc/modprobe.d/lm_sensors.conf:\n\n"; - print "#----cut here----\n". - $configfile. - "#----cut here----\n\n"; - } - } - -- my $have_sysconfig = -d '/etc/sysconfig'; -- printf "Do you want to \%s /etc/sysconfig/lm_sensors? (\%s): ", -- (-e '/etc/sysconfig/lm_sensors' ? 'overwrite' : 'generate'), -- ($have_sysconfig ? 'YES/no' : 'yes/NO'); -- $_ = read_answer(); -- if (($have_sysconfig and not m/^\s*n/i) or m/^\s*y/i) { -- unless ($have_sysconfig) { -- mkdir('/etc/sysconfig', 0777) -- or die "Sorry, can't create /etc/sysconfig ($!)"; -- } -- open(local *SYSCONFIG, ">/etc/sysconfig/lm_sensors") -- or die "Sorry, can't create /etc/sysconfig/lm_sensors ($!)"; -- print SYSCONFIG "# Generated by sensors-detect on " . scalar localtime() . "\n"; -- print SYSCONFIG <<'EOT'; --# This file is sourced by /etc/init.d/lm_sensors and defines the modules to --# be loaded/unloaded. --# --# The format of this file is a shell script that simply defines variables: --# HWMON_MODULES for hardware monitoring driver modules, and optionally --# BUS_MODULES for any required bus driver module (for example for I2C or SPI). -- --EOT -- print SYSCONFIG "BUS_MODULES=\"", join(" ", @{$bus_modules}), "\"\n" -- if @{$bus_modules}; -- print SYSCONFIG "HWMON_MODULES=\"", join(" ", @{$hwmon_modules}), "\"\n"; -- close(SYSCONFIG); -- -- if ($systemd_systemctl && $systemd_system_dir) { -- if (-f "$systemd_system_dir/lm_sensors.service") { -- system($systemd_systemctl, "enable", "lm_sensors.service"); -- system($systemd_systemctl, "start", "lm_sensors.service"); -- # All done, don't check for /etc/init.d/lm_sensors -- } else { -- print "Copy prog/init/lm_sensors.service to $systemd_system_dir\n". -- "and run 'systemctl enable lm_sensors.service'\n". -- "for initialization at boot time.\n"; -- } -- return; -+ # /etc/modules-load.d handling -+ my $modulesload_filedir = '/etc/modules-load.d'; -+ my $modulesload_file = $modulesload_filedir . '/lm_sensors.conf'; -+ my $modulesload_cfg = "# Generated by sensors-detect on " . scalar localtime() . "\n" -+ . join("\n", (@{$bus_modules}, @{$hwmon_modules})) . "\n"; -+ -+ my $have_modulesload_file = -f $modulesload_file; -+ printf "Do you want to \%s '$modulesload_file'? (\%s): ", -+ ($have_modulesload_file ? 'overwrite' : 'generate'), -+ ($have_modulesload_file ? 'yes/NO' : 'YES/no'); -+ -+ my $input = read_answer(); -+ chomp($input); -+ if ($input eq '' && $have_modulesload_file) { -+ $input = 'no'; -+ } -+ elsif ($input eq '' && !$have_modulesload_file) { -+ $input = 'yes'; -+ } -+ -+ if ($input =~ m/^\s*y/i) { -+ unless (-d $modulesload_filedir) { -+ mkdir($modulesload_filedir, 0755) -+ or die "Sorry, can't create '$modulesload_filedir' ($!)"; - } - -- print "Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors\n". -- "for initialization at boot time.\n" -- unless -f "/etc/init.d/lm_sensors"; -+ open(my $fh, '>', $modulesload_file) -+ or die "Sorry, can't open '$modulesload_file' for writing! ($!)"; - -- if (-x "/sbin/insserv" && -f "/etc/init.d/lm_sensors") { -- system("/sbin/insserv", "/etc/init.d/lm_sensors"); -- } elsif (-x "/sbin/chkconfig" && -f "/etc/init.d/lm_sensors") { -- system("/sbin/chkconfig", "lm_sensors", "on"); -- if (-x "/sbin/service") { -- system("/sbin/service", "lm_sensors", "start"); -- } -+ print $fh $modulesload_cfg; -+ close($fh); -+ -+ $have_conffiles_created++; -+ } -+ else { -+ print "\nPlease create '$modulesload_file' with the following content\n" -+ . "to allow modules-load service to autoload modules on boot:\n\n"; -+ print "#----cut here----\n" -+ . "# Generated by sensors-detect on " . scalar localtime() . "\n" -+ . join("\n", (@{$bus_modules}, @{$hwmon_modules})) . "\n" -+ . "#----cut here----\n\n"; -+ } -+ -+ if ($have_conffiles_created) { -+ printf "\nNote: You only have created the required configuration to autoload the\n" -+ . "required modules to use your sensors on boot. If you want to start using\n" -+ . "your sensors right now you have to either load them now once manually, to\n" -+ . "reboot this system or to execute the following command(s):\n\n"; -+ -+ if ($systemd_is_booted) { -+ print " # systemctl restart systemd-modules-load\n\n" - } else { -- print "You should now start the lm_sensors service to load the required\n". -- "kernel modules.\n\n"; -- } -- } else { -- print "To load everything that is needed, add this to one of the system\n". -- "initialization scripts (e.g. /etc/rc.d/rc.local):\n\n"; -- print "#----cut here----\n"; -- if (@{$bus_modules}) { -- print "# Adapter drivers\n"; -- print "modprobe $_\n" foreach (@{$bus_modules}); -+ print " # /etc/init.d/modules restart\n\n" - } -- print "# Chip drivers\n"; -- print "modprobe $_\n" foreach (@{$hwmon_modules}); -- print((-e '/usr/bin/sensors' ? -- "/usr/bin/sensors -s\n" : -- "/usr/local/bin/sensors -s\n"). -- "#----cut here----\n\n"); -- -- print "You really should try these commands right now to make sure everything\n". -- "is working properly. Monitoring programs won't work until the needed\n". -- "modules are loaded.\n\n"; -+ } -+ else { -+ print "\nNote: Please make sure the following modules are loaded when you\n" -+ . "want to make use of your sensors:\n\n"; -+ -+ print " " . join(" ", (@{$bus_modules}, @{$hwmon_modules})) . "\n\n"; - } - } - --- -2.21.0 - - -From c1d471a8be4840a38fe82464e0756a243e158a30 Mon Sep 17 00:00:00 2001 -From: Thomas Deutschmann <whissi@gentoo.org> -Date: Mon, 29 Aug 2016 12:47:50 +0200 -Subject: [PATCH 3/3] sensors-detect: Add Gentoo config file protection - -Per default we don't modify live config file. Instead we create -"._cfg0000_<filename>" files known from emerge when using CONFIG PROTECT. - -See CONFIGURATION FILES section of emerge(1) man page for details. - -Can be disabled using the "--no-gentoo-config-protect" parameter. - -Signed-off-by: Thomas Deutschmann <whissi@gentoo.org> ---- - prog/detect/sensors-detect | 51 +++++++++++++++++++++++++++++++++++--- - 1 file changed, 48 insertions(+), 3 deletions(-) - -diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect -index 1e8ac00d..e548bfaf 100755 ---- a/prog/detect/sensors-detect -+++ b/prog/detect/sensors-detect -@@ -7352,7 +7352,7 @@ sub write_config - mkdir('/etc/modprobe.d', 0755) - or die "Sorry, can't create /etc/modprobe.d ($!)"; - } -- open(local *MODPROBE_D, ">", $have_modprobe_d . '/lm_sensors.conf') -+ open(local *MODPROBE_D, ">", gentoo_get_protected_file($have_modprobe_d . '/lm_sensors.conf')) - or die "Sorry, can't create /etc/modprobe.d/lm_sensors.conf ($!)"; - print MODPROBE_D "# Generated by sensors-detect on " . scalar localtime() . "\n"; - print MODPROBE_D $configfile; -@@ -7393,7 +7393,7 @@ sub write_config - or die "Sorry, can't create '$modulesload_filedir' ($!)"; - } - -- open(my $fh, '>', $modulesload_file) -+ open(my $fh, '>', gentoo_get_protected_file($modulesload_file)) - or die "Sorry, can't open '$modulesload_file' for writing! ($!)"; - - print $fh $modulesload_cfg; -@@ -7411,10 +7411,17 @@ sub write_config - } - - if ($have_conffiles_created) { -+ if (!$opt{no_gentoo_config_protect}) { -+ print "\n * IMPORTANT: At least $have_conffiles_created config file(s) in '/etc' need updating.\n" -+ . " * See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS\n" -+ . " * sections of the emerge man page to learn how to update config files.\n"; -+ } -+ - printf "\nNote: You only have created the required configuration to autoload the\n" - . "required modules to use your sensors on boot. If you want to start using\n" - . "your sensors right now you have to either load them now once manually, to\n" -- . "reboot this system or to execute the following command(s):\n\n"; -+ . "reboot this system or to execute the following command(s)\%s:\n\n", -+ ($opt{no_gentoo_config_protect} ? "" : " _AFTER_\nyou have updated your config files"); - - if ($systemd_is_booted) { - print " # systemctl restart systemd-modules-load\n\n" -@@ -7430,6 +7437,32 @@ sub write_config - } - } - -+sub gentoo_get_protected_file -+{ -+ my ($file) = @_; -+ -+ if ($opt{no_gentoo_config_protect}) { -+ return $file; -+ } -+ -+ my $basename = basename($file); -+ my $dirname = dirname($file); -+ -+ my $protected_file; -+ for (my $prot_num = 0; $prot_num <= 9999; $prot_num++) { -+ $protected_file = sprintf('%s/._cfg%s_%s', -+ $dirname, -+ sprintf("%0*d", 4, $prot_num), -+ $basename); -+ -+ if (! -f $protected_file) { -+ return $protected_file; -+ } -+ } -+ -+ die "Running out of files -- cannot create protected file '$file'" -+} -+ - sub main - { - my ($input, $superio_features); -@@ -7440,6 +7473,8 @@ sub main - $opt{stat} = 1; - } elsif ($ARGV[0] eq "--auto") { - $opt{auto} = 1; -+ } elsif ($ARGV[0] eq "--no-gentoo-config-protect") { -+ $opt{no_gentoo_config_protect} = 1; - } else { - print STDERR "Error: unknown option $ARGV[0]\n"; - exit 1; -@@ -7493,6 +7528,16 @@ sub main - "unless you know what you're doing.\n\n"; - } - -+ if (!$opt{no_gentoo_config_protect}) { -+ print "Gentoo config file protection is active. Every file this program will\n", -+ "modify must be merged before the change will become active using\n", -+ "default Gentoo tools such as dispatch-conf, cfg-update, and etc-update.\n\n"; -+ } -+ else { -+ print "Gentoo config file protection is _disabled_. This program will modify\n", -+ "your active configuration without backups.\n\n"; -+ } -+ - print "Some south bridges, CPUs or memory controllers contain embedded sensors.\n". - "Do you want to scan for them? This is totally safe. (YES/no): "; - $input = read_answer(); --- -2.21.0 - diff --git a/sys-apps/lm_sensors/files/lm_sensors.confd b/sys-apps/lm_sensors/files/lm_sensors.confd deleted file mode 100644 index bae2ea0bbbec..000000000000 --- a/sys-apps/lm_sensors/files/lm_sensors.confd +++ /dev/null @@ -1,4 +0,0 @@ -# /etc/conf.d/lm_sensors - -# NOTE: -# For module loading please use /etc/modules-load.d/lm_sensors.conf diff --git a/sys-apps/lm_sensors/files/lm_sensors.initd b/sys-apps/lm_sensors/files/lm_sensors.initd deleted file mode 100644 index 4efc6c964040..000000000000 --- a/sys-apps/lm_sensors/files/lm_sensors.initd +++ /dev/null @@ -1,21 +0,0 @@ -#!/sbin/openrc-run -# Copyright 1999-2016 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -command="/usr/bin/sensors" - -depend() { - need localmount - after modules-load -} - -start() { - ebegin "Initializing sensors" - ${command} --set >/dev/null 2>&1 - eend $? -} - -stop() { - # Nothing to stop - return 0; -} diff --git a/sys-apps/lm_sensors/files/sensord.confd b/sys-apps/lm_sensors/files/sensord.confd deleted file mode 100644 index a6f2f265c11f..000000000000 --- a/sys-apps/lm_sensors/files/sensord.confd +++ /dev/null @@ -1,19 +0,0 @@ -# /etc/conf.d/sensord - -# PID file -#SENSORD_PIDFILE="/run/sensord.pid" - -# You can use this configuration option to pass additional options to the -# start-stop-daemon, see start-stop-daemon(8) for more details. -# Per default we wait 1000ms after we have started the service to ensure -# that the daemon is really up and running. -#SENSORD_SSDARGS="--wait 1000" - -# The termination timeout (start-stop-daemon parameter "retry") ensures -# that the service will be terminated within a given time (60 + 5 seconds -# per default) when you are stopping the service. -#SENSORD_TERMTIMEOUT="TERM/60/KILL/5" - -# Extra options to pass to the sensord daemon, -# see sensord(8) for more information -#SENSORD_OPTS="" diff --git a/sys-apps/lm_sensors/files/sensord.initd b/sys-apps/lm_sensors/files/sensord.initd deleted file mode 100644 index fa958dbf4389..000000000000 --- a/sys-apps/lm_sensors/files/sensord.initd +++ /dev/null @@ -1,19 +0,0 @@ -#!/sbin/openrc-run -# Copyright 1999-2016 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -SENSORD_PIDFILE=${SENSORD_PIDFILE:-"/run/sensord.pid"} -SENSORD_SSDARGS=${SENSORD_SSDARGS:-"--wait 1000"} -SENSORD_TERMTIMEOUT=${SENSORD_TERMTIMEOUT:-"TERM/60/KILL/5"} -SENSORD_OPTS=${SENSORD_OPTS:-""} - -command="/usr/sbin/sensord" -command_args="${SENSORD_OPTS} --pid-file ${SENSORD_PIDFILE}" -start_stop_daemon_args="${SENSORD_SSDARGS}" -pidfile="${SENSORD_PIDFILE}" -retry="${SENSORD_TERMTIMEOUT}" - -depend() { - need localmount - use logger lm_sensors -} diff --git a/sys-apps/lm_sensors/files/sensord.service-r1 b/sys-apps/lm_sensors/files/sensord.service-r1 deleted file mode 100644 index b7a1e1bc3bd0..000000000000 --- a/sys-apps/lm_sensors/files/sensord.service-r1 +++ /dev/null @@ -1,9 +0,0 @@ -[Unit] -Description=Sensor information logging daemon - -[Service] -PIDFile=/run/sensord.pid -ExecStart=/usr/sbin/sensord - -[Install] -WantedBy=multi-user.target diff --git a/sys-apps/lm_sensors/lm_sensors-3.5.0.ebuild b/sys-apps/lm_sensors/lm_sensors-3.5.0.ebuild deleted file mode 100644 index 5a11eb1e7cf8..000000000000 --- a/sys-apps/lm_sensors/lm_sensors-3.5.0.ebuild +++ /dev/null @@ -1,218 +0,0 @@ -# Copyright 1999-2019 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI="6" - -inherit linux-info systemd toolchain-funcs multilib-minimal eapi7-ver - -DESCRIPTION="Hardware Monitoring user-space utilities" -HOMEPAGE="https://hwmon.wiki.kernel.org/ https://github.com/lm-sensors/lm-sensors" - -MY_PN="${PN/_/-}" - -if [[ "${PV}" =~ .*_p[[:digit:]]{8}.* ]] ; then - COMMIT="807f9b1529892c0ac89bca0c7ae781c59f9c8393" - SRC_URI="https://github.com/lm-sensors/${MY_PN}/archive/${COMMIT}.tar.gz -> ${P}.tar.gz" - S="${WORKDIR}/${MY_PN}-${COMMIT}" -else - SRC_URI="https://github.com/lm-sensors/lm-sensors/archive/V$(ver_rs 1- -).tar.gz -> ${P}.tar.gz" - S="${WORKDIR}/${PN/_/-}-$(ver_rs 1- -)" -fi - -LICENSE="GPL-2+ LGPL-2.1" - -# SUBSLOT based on SONAME of libsensors.so -SLOT="0/5.0.0" - -KEYWORDS="alpha amd64 arm ~arm64 ia64 ~mips ppc ppc64 sparc x86 ~amd64-linux ~x86-linux" -IUSE="contrib sensord static-libs" - -COMMON_DEPS=" - sensord? ( - net-analyzer/rrdtool - virtual/logger - )" - -RDEPEND="${COMMON_DEPS} - dev-lang/perl - !<sys-apps/openrc-0.21.7" - -DEPEND="${COMMON_DEPS} - sys-devel/bison - sys-devel/flex" - -CONFIG_CHECK="~HWMON ~I2C_CHARDEV ~I2C" -WARNING_HWMON="${PN} requires CONFIG_HWMON to be enabled for use." -WARNING_I2C_CHARDEV="sensors-detect requires CONFIG_I2C_CHARDEV to be enabled." -WARNING_I2C="${PN} requires CONFIG_I2C to be enabled for most sensors." - -PATCHES=( "${FILESDIR}"/${PN}-3.4.0-sensors-detect-gentoo.patch ) - -DOCS=( CHANGES CONTRIBUTORS INSTALL README ) -DOCS+=( doc/{donations,fancontrol.txt,fan-divisors,libsensors-API.txt,progs,temperature-sensors,vid} ) - -src_prepare() { - default - - if [[ -n "${COMMIT}" ]]; then - local _version="${PV%_*}+git_${COMMIT}" - - sed -i \ - -e "s:LM_VERSION.*:LM_VERSION \"${_version}\":" \ - version.h || \ - die "Failed to update version.h" - - sed -i \ - -e "s/^\$revision = '.*/\$revision = '${_version}';/" \ - -e "/^\$revision =~ s.*/d" \ - prog/detect/sensors-detect || \ - die "Failed to set revision in prog/detect/sensors-detect" - - sed -i \ - -e "s/^echo \"# pwmconfig revision.*/echo \"# pwmconfig revision ${_version}\"/" \ - -e "/^REVISION=.*/d" \ - -e "/^REVDATE=.*/d" \ - -e "s:^PIDFILE=\".*:PIDFILE=\"/run/fancontrol.pid\":" \ - prog/pwm/pwmconfig || \ - die "Failed to adjust prog/pwm/pwmconfig" - else - sed -i \ - -e "s:^PIDFILE=\".*:PIDFILE=\"/run/fancontrol.pid\":" \ - prog/pwm/pwmconfig || \ - die "Failed to adjust PIDFILE in prog/pwm/pwmconfig" - fi - - # Respect LDFLAGS - sed -i -e 's/\$(LIBDIR)$/\$(LIBDIR) \$(LDFLAGS)/g' Makefile || \ - die "Failed to sed in LDFLAGS" - - sed -i \ - -e "s:^PIDFILE=\".*:PIDFILE=\"/run/fancontrol.pid\":" \ - prog/pwm/fancontrol || \ - die "Failed to adjust PIDFILE of prog/pwm/fancontrol" - - # Don't use EnvironmentFile in systemd unit - sed -i \ - -e '/^EnvironmentFile=/d' \ - -e '/^Exec.*modprobe.*/d' \ - prog/init/lm_sensors.service || \ - die "Failed to remove EnvironmentFile from systemd unit file" - - if ! use static-libs; then - sed -i -e '/^BUILD_STATIC_LIB/d' Makefile || \ - die "Failed to disable static building" - fi - - # Don't show outdated user instructions - sed -i -e '/^ @echo "\*\*\* /d' Makefile || \ - die "Failed to remove outdated user instructions" - - multilib_copy_sources -} - -multilib_src_configure() { - default - - if multilib_is_native_abi && use sensord; then - # sensord requires net-analyzer/rrdtool which doesn't have real multilib - # support. To prevent errors like - # - # skipping incompatible /usr/lib/librrd.so when searching for -lrrd - # cannot find -lrrd - # - # we only build sensord when we are building for profile's native ABI - # (it doesn't affect libsensors.so). - sed -i -e 's:^#\(PROG_EXTRA.*\):\1:' Makefile || \ - die "Failed to enable building of sensord" - fi -} - -multilib_src_compile() { - emake \ - CC="$(tc-getCC)" \ - CXX="$(tc-getCXX)" \ - LD="$(tc-getLD)" \ - AR="$(tc-getAR)" -} - -multilib_src_install() { - emake \ - DESTDIR="${D%/}" \ - PREFIX="/usr" \ - MANDIR="/usr/share/man" \ - ETCDIR="/etc" \ - LIBDIR="/usr/$(get_libdir)" \ - install -} - -multilib_src_install_all() { - newinitd "${FILESDIR}"/lm_sensors.initd lm_sensors - newconfd "${FILESDIR}"/lm_sensors.confd lm_sensors - systemd_dounit prog/init/lm_sensors.service - - newinitd "${FILESDIR}"/fancontrol.initd fancontrol - newconfd "${FILESDIR}"/fancontrol.confd fancontrol - systemd_newunit "${FILESDIR}"/fancontrol.service-r1 fancontrol.service - - if use sensord; then - newconfd "${FILESDIR}"/sensord.confd sensord - newinitd "${FILESDIR}"/sensord.initd sensord - systemd_newunit "${FILESDIR}"/sensord.service-r1 sensord.service - fi - - einstalldocs - - docinto developers - dodoc doc/developers/applications - - if use contrib; then - insinto /usr/share/lm_sensors - doins -r "${S}"/configs - fi -} - -pkg_postinst() { - local _new_loader='3.4.0_p20160725' - local _v - for _v in ${REPLACING_VERSIONS}; do - if ! ver_test "${_v}" -gt "${_new_loader}"; then - # This is an upgrade which require migration - - elog "" - elog "Since version 3.4.0_p20160725 ${PN} no longer loads modules on its own" - elog "instead it is using \"modules-load\" services provided by OpenRC or systemd." - elog "" - elog "To migrate your configuration you have 2 options:" - elog "" - elog " a) Re-create a new configuration using \"/usr/sbin/sensors-detect\"" - elog "" - elog " b) Copy existing \"modules_<n>\", \"HWMON_MODULES\" or \"BUS_MODULES\"" - elog " variables from \"/etc/conf.d/lm_modules\" to" - elog " \"/etc/modules-load.d/lm_sensors.conf\" and adjust format." - elog "" - elog " For details see https://wiki.gentoo.org/wiki/Systemd#Automatic_module_loading" - elog "" - elog " Important: Don't forget to migrate your module's argument" - elog " (modules_<name>_args variable) if your are not already" - elog " using \"/etc/modprobe.d\" (which is recommended)." - - # Show this elog only once - break - fi - done - - if [[ -z "${REPLACING_VERSIONS}" ]]; then - # New installation - - elog "" - elog "Please run \`/usr/sbin/sensors-detect' in order to setup" - elog "\"/etc/modules-load.d/lm_sensors.conf\"." - elog "" - elog "You might want to add lm_sensors to your default runlevel to make" - elog "sure the sensors get initialized on the next startup." - elog "" - elog "Be warned, the probing of hardware in your system performed by" - elog "sensors-detect could freeze your system. Also make sure you read" - elog "the documentation before running ${PN} on IBM ThinkPads." - fi -} diff --git a/sys-apps/lm_sensors/lm_sensors-3.5.0_p20190505.ebuild b/sys-apps/lm_sensors/lm_sensors-3.5.0_p20190505.ebuild deleted file mode 100644 index f84df9880d5c..000000000000 --- a/sys-apps/lm_sensors/lm_sensors-3.5.0_p20190505.ebuild +++ /dev/null @@ -1,218 +0,0 @@ -# Copyright 1999-2019 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI="7" - -inherit linux-info systemd toolchain-funcs multilib-minimal - -DESCRIPTION="Hardware Monitoring user-space utilities" -HOMEPAGE="https://hwmon.wiki.kernel.org/ https://github.com/lm-sensors/lm-sensors" - -MY_PN="${PN/_/-}" - -if [[ "${PV}" =~ .*_p[[:digit:]]{8}.* ]] ; then - COMMIT="2c8cca3d6cd60121b401734c1a24cfec7daed4fc" - SRC_URI="https://github.com/lm-sensors/${MY_PN}/archive/${COMMIT}.tar.gz -> ${P}.tar.gz" - S="${WORKDIR}/${MY_PN}-${COMMIT}" -else - SRC_URI="https://github.com/lm-sensors/lm-sensors/archive/V$(ver_rs 1- -).tar.gz -> ${P}.tar.gz" - S="${WORKDIR}/${PN/_/-}-$(ver_rs 1- -)" -fi - -LICENSE="GPL-2+ LGPL-2.1" - -# SUBSLOT based on SONAME of libsensors.so -SLOT="0/5.0.0" - -KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~ia64 ~mips ~ppc ~ppc64 ~sparc ~x86 ~amd64-linux ~x86-linux" -IUSE="contrib sensord static-libs" - -COMMON_DEPS=" - sensord? ( - net-analyzer/rrdtool - virtual/logger - )" - -RDEPEND="${COMMON_DEPS} - dev-lang/perl - !<sys-apps/openrc-0.36" - -DEPEND="${COMMON_DEPS} - sys-devel/bison - sys-devel/flex" - -CONFIG_CHECK="~HWMON ~I2C_CHARDEV ~I2C" -WARNING_HWMON="${PN} requires CONFIG_HWMON to be enabled for use." -WARNING_I2C_CHARDEV="sensors-detect requires CONFIG_I2C_CHARDEV to be enabled." -WARNING_I2C="${PN} requires CONFIG_I2C to be enabled for most sensors." - -PATCHES=( "${FILESDIR}"/${PN}-3.5.0-sensors-detect-gentoo.patch ) - -DOCS=( CHANGES CONTRIBUTORS INSTALL README ) -DOCS+=( doc/{donations,fancontrol.txt,fan-divisors,libsensors-API.txt,progs,temperature-sensors,vid} ) - -src_prepare() { - default - - if [[ -n "${COMMIT}" ]]; then - local _version="${PV%_*}+git_${COMMIT}" - - sed -i \ - -e "s:LM_VERSION.*:LM_VERSION \"${_version}\":" \ - version.h || \ - die "Failed to update version.h" - - sed -i \ - -e "s/^\$revision = '.*/\$revision = '${_version}';/" \ - -e "/^\$revision =~ s.*/d" \ - prog/detect/sensors-detect || \ - die "Failed to set revision in prog/detect/sensors-detect" - - sed -i \ - -e "s/^echo \"# pwmconfig revision.*/echo \"# pwmconfig revision ${_version}\"/" \ - -e "/^REVISION=.*/d" \ - -e "/^REVDATE=.*/d" \ - -e "s:^PIDFILE=\".*:PIDFILE=\"/run/fancontrol.pid\":" \ - prog/pwm/pwmconfig || \ - die "Failed to adjust prog/pwm/pwmconfig" - else - sed -i \ - -e "s:^PIDFILE=\".*:PIDFILE=\"/run/fancontrol.pid\":" \ - prog/pwm/pwmconfig || \ - die "Failed to adjust PIDFILE in prog/pwm/pwmconfig" - fi - - # Respect LDFLAGS - sed -i -e 's/\$(LIBDIR)$/\$(LIBDIR) \$(LDFLAGS)/g' Makefile || \ - die "Failed to sed in LDFLAGS" - - sed -i \ - -e "s:^PIDFILE=\".*:PIDFILE=\"/run/fancontrol.pid\":" \ - prog/pwm/fancontrol || \ - die "Failed to adjust PIDFILE of prog/pwm/fancontrol" - - # Don't use EnvironmentFile in systemd unit - sed -i \ - -e '/^EnvironmentFile=/d' \ - -e '/^Exec.*modprobe.*/d' \ - prog/init/lm_sensors.service || \ - die "Failed to remove EnvironmentFile from systemd unit file" - - if ! use static-libs; then - sed -i -e '/^BUILD_STATIC_LIB/d' Makefile || \ - die "Failed to disable static building" - fi - - # Don't show outdated user instructions - sed -i -e '/^ @echo "\*\*\* /d' Makefile || \ - die "Failed to remove outdated user instructions" - - multilib_copy_sources -} - -multilib_src_configure() { - default - - if multilib_is_native_abi && use sensord; then - # sensord requires net-analyzer/rrdtool which doesn't have real multilib - # support. To prevent errors like - # - # skipping incompatible /usr/lib/librrd.so when searching for -lrrd - # cannot find -lrrd - # - # we only build sensord when we are building for profile's native ABI - # (it doesn't affect libsensors.so). - sed -i -e 's:^#\(PROG_EXTRA.*\):\1:' Makefile || \ - die "Failed to enable building of sensord" - fi -} - -multilib_src_compile() { - emake \ - CC="$(tc-getCC)" \ - CXX="$(tc-getCXX)" \ - LD="$(tc-getLD)" \ - AR="$(tc-getAR)" -} - -multilib_src_install() { - emake \ - DESTDIR="${D%/}" \ - PREFIX="/usr" \ - MANDIR="/usr/share/man" \ - ETCDIR="/etc" \ - LIBDIR="/usr/$(get_libdir)" \ - install -} - -multilib_src_install_all() { - newinitd "${FILESDIR}"/lm_sensors.initd lm_sensors - newconfd "${FILESDIR}"/lm_sensors.confd lm_sensors - systemd_dounit prog/init/lm_sensors.service - - newinitd "${FILESDIR}"/fancontrol.initd fancontrol - newconfd "${FILESDIR}"/fancontrol.confd fancontrol - systemd_newunit "${FILESDIR}"/fancontrol.service-r1 fancontrol.service - - if use sensord; then - newconfd "${FILESDIR}"/sensord.confd sensord - newinitd "${FILESDIR}"/sensord.initd sensord - systemd_newunit "${FILESDIR}"/sensord.service-r1 sensord.service - fi - - einstalldocs - - docinto developers - dodoc doc/developers/applications - - if use contrib; then - insinto /usr/share/lm_sensors - doins -r "${S}"/configs - fi -} - -pkg_postinst() { - local _new_loader='3.4.0_p20160725' - local _v - for _v in ${REPLACING_VERSIONS}; do - if ! ver_test "${_v}" -gt "${_new_loader}"; then - # This is an upgrade which require migration - - elog "" - elog "Since version 3.4.0_p20160725 ${PN} no longer loads modules on its own" - elog "instead it is using \"modules-load\" services provided by OpenRC or systemd." - elog "" - elog "To migrate your configuration you have 2 options:" - elog "" - elog " a) Re-create a new configuration using \"/usr/sbin/sensors-detect\"" - elog "" - elog " b) Copy existing \"modules_<n>\", \"HWMON_MODULES\" or \"BUS_MODULES\"" - elog " variables from \"/etc/conf.d/lm_modules\" to" - elog " \"/etc/modules-load.d/lm_sensors.conf\" and adjust format." - elog "" - elog " For details see https://wiki.gentoo.org/wiki/Systemd#Automatic_module_loading" - elog "" - elog " Important: Don't forget to migrate your module's argument" - elog " (modules_<name>_args variable) if your are not already" - elog " using \"/etc/modprobe.d\" (which is recommended)." - - # Show this elog only once - break - fi - done - - if [[ -z "${REPLACING_VERSIONS}" ]]; then - # New installation - - elog "" - elog "Please run \`/usr/sbin/sensors-detect' in order to setup" - elog "\"/etc/modules-load.d/lm_sensors.conf\"." - elog "" - elog "You might want to add lm_sensors to your default runlevel to make" - elog "sure the sensors get initialized on the next startup." - elog "" - elog "Be warned, the probing of hardware in your system performed by" - elog "sensors-detect could freeze your system. Also make sure you read" - elog "the documentation before running ${PN} on IBM ThinkPads." - fi -} diff --git a/sys-apps/lm_sensors/metadata.xml b/sys-apps/lm_sensors/metadata.xml deleted file mode 100644 index 897d37da3562..000000000000 --- a/sys-apps/lm_sensors/metadata.xml +++ /dev/null @@ -1,31 +0,0 @@ -<?xml version='1.0' encoding='UTF-8'?> -<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd"> -<pkgmetadata> - <maintainer type="person"> - <email>polynomial-c@gentoo.org</email> - <name>Lars Wendler</name> - </maintainer> - <maintainer type="person"> - <email>whissi@gentoo.org</email> - <name>Thomas Deutschmann</name> - </maintainer> - <slots> - <subslots>Reflect ABI of libsensors.so.</subslots> - </slots> - <use> - <flag name="contrib"> - Installs user contributed configuration files so you don't need - to find settings on your own for your system if somebody else - has already created such a configuration for sensors/mainboards - you are using. - </flag> - <flag name="sensord"> - Enable sensord - a daemon that can be used to - periodically log sensor readings from hardware health-monitoring - chips - </flag> - </use> - <upstream> - <remote-id type="github">groeck/lm-sensors</remote-id> - </upstream> -</pkgmetadata> |