media-gfx/freecad: cleanup vulnerable versions

Bug: https://bugs.gentoo.org/832209
Package-Manager: Portage-3.0.30, Repoman-3.0.3
Signed-off-by: Bernd Waibel <waebbl-gentoo@posteo.net>
Closes: https://github.com/gentoo/gentoo/pull/24061
Signed-off-by: John Helmert III <ajak@gentoo.org>

1 files changed, 0 insertions, 324 deletions

diff --git a/media-gfx/freecad/freecad-0.19.2-r5.ebuild b/media-gfx/freecad/freecad-0.19.2-r5.ebuild
deleted file mode 100644
index 7ebeed8e3168..000000000000
--- a/media-gfx/freecad/freecad-0.19.2-r5.ebuild
+++ /dev/null
@@ -1,324 +0,0 @@
-# Copyright 1999-2021 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-PYTHON_COMPAT=( python3_{8,9} )
-
-inherit check-reqs cmake optfeature python-single-r1 xdg
-
-DESCRIPTION="QT based Computer Aided Design application"
-HOMEPAGE="https://www.freecadweb.org/ https://github.com/FreeCAD/FreeCAD"
-
-MY_PN=FreeCAD
-
-if [[ ${PV} = *9999 ]]; then
-	inherit git-r3
-	EGIT_REPO_URI="https://github.com/${MY_PN}/${MY_PN}.git"
-	S="${WORKDIR}/freecad-${PV}"
-else
-	MY_PV=$(ver_cut 1-2)
-	MY_PV=$(ver_rs 1 '_' ${MY_PV})
-	SRC_URI="https://github.com/${MY_PN}/${MY_PN}/archive/refs/tags/${PV}.tar.gz -> ${P}.tar.gz
-		https://raw.githubusercontent.com/waebbl/waebbl-gentoo/master/patches/${P}-0005-Make-smesh-compile-with-vtk9.patch.xz"
-	KEYWORDS="~amd64"
-	S="${WORKDIR}/FreeCAD-${PV}"
-fi
-
-# code is licensed LGPL-2
-# examples are licensed CC-BY-SA (without note of specific version)
-LICENSE="LGPL-2 CC-BY-SA-4.0"
-SLOT="0"
-IUSE="debug headless pcl test"
-RESTRICT="!test? ( test )"
-
-FREECAD_EXPERIMENTAL_MODULES="cloud plot ship"
-FREECAD_STABLE_MODULES="addonmgr fem idf image inspection material
-	openscad part-design path points raytracing robot show surface
-	techdraw tux"
-
-for module in ${FREECAD_STABLE_MODULES}; do
-	IUSE="${IUSE} +${module}"
-done
-for module in ${FREECAD_EXPERIMENTAL_MODULES}; do
-	IUSE="${IUSE} ${module}"
-done
-unset module
-
-RDEPEND="
-	${PYTHON_DEPS}
-	dev-libs/OpenNI2[opengl(+)]
-	dev-libs/libspnav[X]
-	dev-libs/xerces-c[icu]
-	dev-qt/designer:5
-	dev-qt/qtconcurrent:5
-	dev-qt/qtcore:5
-	dev-qt/qtgui:5
-	dev-qt/qtnetwork:5
-	dev-qt/qtopengl:5
-	dev-qt/qtprintsupport:5
-	dev-qt/qtsvg:5
-	dev-qt/qtwebengine:5[widgets]
-	dev-qt/qtwidgets:5
-	dev-qt/qtx11extras:5
-	dev-qt/qtxml:5
-	>=media-libs/coin-4.0.0
-	media-libs/freetype
-	media-libs/qhull:=
-	sci-libs/flann[openmp]
-	sci-libs/hdf5:=[fortran,zlib]
-	>=sci-libs/med-4.0.0-r1[python,${PYTHON_SINGLE_USEDEP}]
-	<sci-libs/opencascade-7.6.0:=[vtk(+)]
-	sci-libs/orocos_kdl:=
-	sys-libs/zlib
-	virtual/glu
-	virtual/libusb:1
-	virtual/opengl
-	cloud? (
-		dev-libs/openssl:=
-		net-misc/curl
-	)
-	fem? ( sci-libs/vtk:=[boost(+),python,qt5,rendering,${PYTHON_SINGLE_USEDEP}] )
-	openscad? ( media-gfx/openscad )
-	pcl? ( >=sci-libs/pcl-1.8.1:=[opengl,openni2(+),qt5(+),vtk(+)] )
-	$(python_gen_cond_dep '
-		dev-libs/boost:=[python,threads(+),${PYTHON_USEDEP}]
-		dev-python/matplotlib[${PYTHON_USEDEP}]
-		dev-python/numpy[${PYTHON_USEDEP}]
-		>=dev-python/pivy-0.6.5[${PYTHON_USEDEP}]
-		dev-python/pybind11[${PYTHON_USEDEP}]
-		dev-python/pyside2[gui,svg,${PYTHON_USEDEP}]
-		dev-python/shiboken2[${PYTHON_USEDEP}]
-		addonmgr? ( dev-python/GitPython[${PYTHON_USEDEP}] )
-		fem? ( dev-python/ply[${PYTHON_USEDEP}] )
-	')
-"
-DEPEND="
-	${RDEPEND}
-	>=dev-cpp/eigen-3.3.1:3
-"
-BDEPEND="dev-lang/swig"
-
-# To get required dependencies:
-# 'grep REQUIRES_MODS cMake/FreeCAD_Helpers/CheckInterModuleDependencies.cmake'
-# We set the following requirements by default:
-# arch, draft, drawing, import, mesh, part, qt5, sketcher, spreadsheet, start, web.
-#
-# Additionally, we auto-enable mesh_part, flat_mesh and smesh
-# Fem actually needs smesh, but as long as we don't have a smesh package, we enable
-# smesh through the mesh USE flag. Note however, the fem<-smesh dependency isn't
-# reflected by the REQUIRES_MODS macro, but at
-# cMake/FreeCAD_Helpers/InitializeFreeCADBuildOptions.cmake:187.
-#
-# The increase in auto-enabled workbenches is due to their need in parts of the
-# test suite when compiled with a minimal set of USE flags.
-REQUIRED_USE="
-	${PYTHON_REQUIRED_USE}
-	inspection? ( points )
-	path? ( robot )
-	ship? ( image plot )
-"
-
-PATCHES=(
-	"${FILESDIR}"/${PN}-0.19_pre20201231-0003-Gentoo-specific-don-t-check-vcs.patch
-	"${FILESDIR}"/${PN}-0.19.1-0001-Gentoo-specific-Remove-ccache-usage.patch
-	"${FILESDIR}"/${P}-0001-fix-failing-test-workbench-testcase.patch
-	"${FILESDIR}"/${P}-0002-fix-femtest-failure-with-yaml-load.patch
-	"${FILESDIR}"/${P}-0003-fix-test-when-built-without-GUI.patch
-	"${WORKDIR}"/${P}-0005-Make-smesh-compile-with-vtk9.patch
-	"${FILESDIR}"/${P}-0006-add-boost-serialization-to-find_package.patch
-	"${FILESDIR}"/${P}-0007-fix-build-failure-with-opencascade-7.5.2.patch
-)
-
-DOCS=( CODE_OF_CONDUCT.md ChangeLog.txt README.md )
-
-CHECKREQS_DISK_BUILD="2G"
-
-pkg_setup() {
-	check-reqs_pkg_setup
-	python-single-r1_pkg_setup
-	[[ -z ${CASROOT} ]] && die "\${CASROOT} not set, plesae run eselect opencascade"
-}
-
-src_prepare() {
-	# the upstream provided file doesn't find the coin doc tag file,
-	# but cmake ships a working one, so we use this.
-	rm "${S}/cMake/FindCoin3D.cmake" || die
-
-	# Fix desktop file
-	sed -e 's/Exec=FreeCAD/Exec=freecad/' -i src/XDGData/org.freecadweb.FreeCAD.desktop || die
-
-	cmake_src_prepare
-}
-
-src_configure() {
-	local mycmakeargs=(
-		-DBUILD_ADDONMGR=$(usex addonmgr)
-		-DBUILD_ARCH=ON
-		-DBUILD_ASSEMBLY=OFF					# deprecated
-		-DBUILD_CLOUD=$(usex cloud)
-		-DBUILD_COMPLETE=OFF					# deprecated
-		-DBUILD_DRAFT=ON
-		-DBUILD_DRAWING=ON
-		-DBUILD_ENABLE_CXX_STD:STRING="C++17"	# needed for >=boost-1.77.0
-		-DBUILD_FEM=$(usex fem)
-		-DBUILD_FEM_NETGEN=OFF
-		-DBUILD_FLAT_MESH=ON
-		-DBUILD_FORCE_DIRECTORY=ON				# force building in a dedicated directory
-		-DBUILD_FREETYPE=ON						# automagic dep
-		-DBUILD_GUI=$(usex !headless)
-		-DBUILD_IDF=$(usex idf)
-		-DBUILD_IMAGE=$(usex image)
-		-DBUILD_IMPORT=ON						# import module for various file formats
-		-DBUILD_INSPECTION=$(usex inspection)
-		-DBUILD_JTREADER=OFF					# code has been removed upstream, but option is still there
-		-DBUILD_MATERIAL=$(usex material)
-		-DBUILD_MESH=ON
-		-DBUILD_MESH_PART=ON
-		-DBUILD_OPENSCAD=$(usex openscad)
-		-DBUILD_PART=ON
-		-DBUILD_PART_DESIGN=$(usex part-design)
-		-DBUILD_PATH=$(usex path)
-		-DBUILD_PLOT=$(usex plot)				# conflicts with possible external workbench
-		-DBUILD_POINTS=$(usex points)
-		-DBUILD_QT5=ON							# OFF means to use Qt4
-		-DBUILD_RAYTRACING=$(usex raytracing)
-		-DBUILD_REVERSEENGINEERING=OFF			# currently only an empty sandbox
-		-DBUILD_ROBOT=$(usex robot)
-		-DBUILD_SHIP=$(usex ship)				# conflicts with possible external workbench
-		-DBUILD_SHOW=$(usex show)
-		-DBUILD_SKETCHER=ON						# needed by draft workspace
-		-DBUILD_SMESH=ON
-		-DBUILD_SPREADSHEET=ON
-		-DBUILD_START=ON
-		-DBUILD_SURFACE=$(usex surface)
-		-DBUILD_TECHDRAW=$(usex techdraw)
-		-DBUILD_TEST=ON							# always build test workbench for run-time testing
-		-DBUILD_TUX=$(usex tux)
-		-DBUILD_VR=OFF
-		-DBUILD_WEB=ON							# needed by start workspace
-		-DBUILD_WITH_CONDA=OFF
-
-		-DCMAKE_INSTALL_DATADIR=/usr/share/${PN}/data
-		-DCMAKE_INSTALL_DOCDIR=/usr/share/doc/${PF}
-		-DCMAKE_INSTALL_INCLUDEDIR=/usr/include/${PN}
-		-DCMAKE_INSTALL_PREFIX=/usr/$(get_libdir)/${PN}
-
-		-DFREECAD_BUILD_DEBIAN=OFF
-
-		-DFREECAD_USE_EXTERNAL_KDL=ON
-		-DFREECAD_USE_EXTERNAL_SMESH=OFF		# no package in Gentoo
-		-DFREECAD_USE_EXTERNAL_ZIPIOS=OFF		# doesn't work yet, also no package in Gentoo tree
-		-DFREECAD_USE_FREETYPE=ON
-		-DFREECAD_USE_OCC_VARIANT:STRING="Official Version"
-		-DFREECAD_USE_PCL=$(usex pcl)
-		-DFREECAD_USE_PYBIND11=ON
-		-DFREECAD_USE_QT_FILEDIALOG=ON
-		-DFREECAD_USE_QTWEBMODULE:STRING="Qt WebEngine"
-
-		# install python modules to site-packages' dir. True only for the main package,
-		# sub-packages will still be installed inside /usr/lib64/freecad
-		-DINSTALL_TO_SITEPACKAGES=ON
-
-		# Use the version of shiboken2 that matches the selected python version
-		-DPYTHON_CONFIG_SUFFIX="-${EPYTHON}"
-		-DPython3_EXECUTABLE=${PYTHON}
-	)
-
-	if use debug; then
-		mycmakeargs+=(
-			-DBUILD_SANDBOX=ON
-			-DBUILD_TEMPLATE=ON
-		)
-	else
-		mycmakeargs+=(
-			-DBUILD_SANDBOX=OFF
-			-DBUILD_TEMPLATE=OFF
-		)
-	fi
-
-	cmake_src_configure
-}
-
-# We use the FreeCADCmd binary instead of the FreeCAD binary here
-# for two reasons:
-# 1. It works out of the box with USE=headless as well, not needing a guard
-# 2. We don't need virtualx.eclass and it's dependencies
-# The exported environment variables are needed, so freecad does know
-# where to save it's temporary files, and where to look and write it's
-# configuration. Without those, there are sandbox violation, when it
-# tries to create /var/lib/portage/home/.FreeCAD directory.
-src_test() {
-	pushd "${BUILD_DIR}" > /dev/null || die
-	export FREECAD_USER_HOME="${HOME}"
-	export FREECAD_USER_DATA="${T}"
-	export FREECAD_USER_TEMP="${T}"
-	nonfatal ./bin/FreeCADCmd --run-test 0
-	popd > /dev/null || die
-}
-
-src_install() {
-	cmake_src_install
-
-	dobin src/Tools/freecad-thumbnailer
-
-	if ! use headless; then
-		dosym -r /usr/$(get_libdir)/${PN}/bin/FreeCAD /usr/bin/freecad
-		mv "${ED}"/usr/$(get_libdir)/freecad/share/* "${ED}"/usr/share || die "failed to move shared ressources"
-	fi
-	dosym -r /usr/$(get_libdir)/${PN}/bin/FreeCADCmd /usr/bin/freecadcmd
-
-	python_optimize "${ED}"/usr/share/${PN}/data/Mod/Start/StartPage "${ED}"/usr/$(get_libdir)/${PN}{/Ext,/Mod}/
-	# compile main package in python site-packages as well
-	python_optimize
-
-	doenvd "${FILESDIR}/99${PN}"
-}
-
-pkg_postinst() {
-	xdg_pkg_postinst
-
-	if use plot; then
-		einfo "Note: You are enabling the 'plot' USE flag."
-		einfo "This conflicts with the plot workbench that can be loaded"
-		einfo "via the addon manager! You can only install one of those."
-	fi
-
-	if use ship; then
-		einfo "Note: You are enabling the 'ship' USE flag."
-		einfo "This conflicts with the ship workbench that can be loaded"
-		einfo "via the addon manager! You can only install one of those."
-	fi
-
-	einfo "You can load a lot of additional workbenches using the integrated"
-	einfo "AddonManager."
-
-	# ToDo: check opencv, pysolar (::science), elmerfem (::science)
-	#		ifc++, ifcopenshell, netgen, z88 (no pkgs), calculix-ccx (::waebbl)
-	einfo "There are a lot of additional tools, for which FreeCAD has builtin"
-	einfo "support. Some of them are available in Gentoo. Take a look at"
-	einfo "https://wiki.freecadweb.org/Installing#External_software_supported_by_FreeCAD"
-	optfeature_header "Computational utilities"
-	optfeature "BLAS library" sci-libs/openblas
-	optfeature "Statistical computation with Python" dev-python/pandas
-	optfeature "Use scientific computation with Python" dev-python/scipy
-	optfeature "Use symbolic math with Python" dev-python/sympy
-	optfeature_header "Imaging, Plotting and Rendering utilities"
-	optfeature "Dependency graphs" media-gfx/graphviz
-	optfeature "PBR Rendering" media-gfx/povray
-	optfeature_header "Import / Export"
-	optfeature "Interact with git repositories" dev-python/GitPython
-	optfeature "Work with COLLADA documents" dev-python/pycollada
-	optfeature "YAML importer and emitter" dev-python/pyyaml
-	optfeature "Importing and exporting 2D AutoCAD DWG files" media-gfx/libredwg
-	optfeature "Importing and exporting geospatial data formats" sci-libs/gdal
-	optfeature "Working with projection data" sci-libs/proj
-	optfeature_header "Meshing and FEM"
-	optfeature "FEM mesh generator" sci-libs/gmsh
-	optfeature "Triangulating meshes" sci-libs/gts
-	optfeature "Visualization" sci-visualization/paraview
-}
-
-pkg_postrm() {
-	xdg_pkg_postrm
-}