summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDean Bailey <alron@gentoo.org>2003-02-12 06:32:53 +0000
committerDean Bailey <alron@gentoo.org>2003-02-12 06:32:53 +0000
commit83a703edcc596e06cf9ca7cef88bfab22b5632f6 (patch)
treeae492ec513164d1404542dca71f1d58b60d3231a /net-analyzer
parentSed fix and added inits to latest release. (diff)
downloadgentoo-2-83a703edcc596e06cf9ca7cef88bfab22b5632f6.tar.gz
gentoo-2-83a703edcc596e06cf9ca7cef88bfab22b5632f6.tar.bz2
gentoo-2-83a703edcc596e06cf9ca7cef88bfab22b5632f6.zip
Addressing nagios.cfg-sample issue in bug #14731
Diffstat (limited to 'net-analyzer')
-rw-r--r--net-analyzer/nagios-core/ChangeLog8
-rw-r--r--net-analyzer/nagios-core/files/digest-nagios-core-1.0-r11
-rw-r--r--net-analyzer/nagios-core/files/nagios.cfg-sample698
-rw-r--r--net-analyzer/nagios-core/nagios-core-1.0-r1.ebuild89
4 files changed, 795 insertions, 1 deletions
diff --git a/net-analyzer/nagios-core/ChangeLog b/net-analyzer/nagios-core/ChangeLog
index 6e7e9a87657e..1cdc738f5749 100644
--- a/net-analyzer/nagios-core/ChangeLog
+++ b/net-analyzer/nagios-core/ChangeLog
@@ -1,6 +1,12 @@
# ChangeLog for net-analyzer/nagios-core
# Copyright 2002 Gentoo Technologies, Inc.; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/net-analyzer/nagios-core/ChangeLog,v 1.6 2003/01/15 19:53:32 alron Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-analyzer/nagios-core/ChangeLog,v 1.7 2003/02/12 06:32:53 alron Exp $
+
+*nagios-core-1.0-r1 (11 Feb 2003)
+ 11 Feb 2003; Dean Bailey <alron@gentoo.org> nagios-core-1.0-r1 :
+ Added an annotated nagios.cfg-sample file, so people don't break
+ their nagios install by changing paths that shouldnt be changed.
+ This addresses bug #14731
15 Jan 2003; Dean Bailey <alron@gentoo.org> nagios-core-1.0 :
Changed ~x86 to x86 and added sparc and ppc keywords
diff --git a/net-analyzer/nagios-core/files/digest-nagios-core-1.0-r1 b/net-analyzer/nagios-core/files/digest-nagios-core-1.0-r1
new file mode 100644
index 000000000000..1fb04288cd39
--- /dev/null
+++ b/net-analyzer/nagios-core/files/digest-nagios-core-1.0-r1
@@ -0,0 +1 @@
+MD5 9f95388c59b34c06745870fd2012388e nagios-1.0.tar.gz 1616233
diff --git a/net-analyzer/nagios-core/files/nagios.cfg-sample b/net-analyzer/nagios-core/files/nagios.cfg-sample
new file mode 100644
index 000000000000..b93efffb36ee
--- /dev/null
+++ b/net-analyzer/nagios-core/files/nagios.cfg-sample
@@ -0,0 +1,698 @@
+##############################################################################
+#
+# NAGIOS.CFG - Sample Main Config File for Nagios 1.0
+#
+# Read the documentation for more information on this configuration
+# file. I've provided some comments here, but things may not be so
+# clear without further explanation.
+#
+# Last Modified: 07-04-2002
+#
+##############################################################################
+#
+# With notes on what will cause nagios to break on Gentoo
+# --Alron@gentoo.org
+##############################################################################
+
+# LOG FILE
+# This is the main log file where service and host events are logged
+# for historical purposes. This should be the first option specified
+# in the config file!!!
+
+# do not change this unless you want nagios to break (unless you
+# understand why its in this location and what you need to do
+# to make it work in another location)
+# --alron@gentoo.org
+log_file=/var/nagios/nagios.log
+
+
+
+# OBJECT CONFIGURATION FILE(S)
+# This is the configuration file in which you define hosts, host
+# groups, contacts, contact groups, services, etc. I guess it would
+# be better called an object definition file, but for historical
+# reasons it isn't. You can split object definitions into several
+# different config files by using multiple cfg_file statements here.
+# Nagios will read and process all the config files you define.
+# This can be very useful if you want to keep command definitions
+# separate from host and contact definitions...
+
+# Plugin commands (service and host check commands)
+# Arguments are likely to change between different releases of the
+# plugins, so you should use the same config file provided with the
+# plugin release rather than the one provided with Nagios.
+cfg_file=/etc/nagios/checkcommands.cfg
+
+# Misc commands (notification and event handler commands, etc)
+cfg_file=/etc/nagios/misccommands.cfg
+
+# You can split other types of object definitions across several
+# config files if you wish (as done here), or keep them all in a
+# single config file.
+
+cfg_file=/etc/nagios/contactgroups.cfg
+cfg_file=/etc/nagios/contacts.cfg
+cfg_file=/etc/nagios/dependencies.cfg
+cfg_file=/etc/nagios/escalations.cfg
+cfg_file=/etc/nagios/hostgroups.cfg
+cfg_file=/etc/nagios/hosts.cfg
+cfg_file=/etc/nagios/services.cfg
+cfg_file=/etc/nagios/timeperiods.cfg
+
+
+
+# RESOURCE FILE
+# This is an optional resource file that contains $USERx$ macro
+# definitions. Multiple resource files can be specified by using
+# multiple resource_file definitions. The CGIs will not attempt to
+# read the contents of resource files, so information that is
+# considered to be sensitive (usernames, passwords, etc) can be
+# defined as macros in this file and restrictive permissions (600)
+# can be placed on this file.
+
+resource_file=/etc/nagios/resource.cfg
+
+
+
+# STATUS FILE
+# This is where the current status of all monitored services and
+# hosts is stored. Its contents are read and processed by the CGIs.
+# The contentsof the status file are deleted every time Nagios
+# restarts.
+
+# Do not change this unless you know what you are doing, as it will
+# cause nagios to break.
+# --alron@gentoo.org
+status_file=/var/nagios/status.log
+
+
+
+# NAGIOS USER
+# This determines the effective user that Nagios should run as.
+# You can either supply a username or a UID.
+
+# Do not change unless you have changed the UID of nagios and
+# the ownership of all of its files.
+# --alron
+nagios_user=nagios
+
+
+
+# NAGIOS GROUP
+# This determines the effective group that Nagios should run as.
+# You can either supply a group name or a GID.
+
+# This too dont change like the UID
+# --alron
+nagios_group=nagios
+
+
+
+# EXTERNAL COMMAND OPTION
+# This option allows you to specify whether or not Nagios should check
+# for external commands (in the command file defined below). By default
+# Nagios will *not* check for external commands, just to be on the
+# cautious side. If you want to be able to use the CGI command interface
+# you will have to enable this. Setting this value to 0 disables command
+# checking (the default), other values enable it.
+
+check_external_commands=0
+
+
+
+# EXTERNAL COMMAND CHECK INTERVAL
+# This is the interval at which Nagios should check for external commands.
+# This value works of the interval_length you specify later. If you leave
+# that at its default value of 60 (seconds), a value of 1 here will cause
+# Nagios to check for external commands every minute. If you specify a
+# number followed by an "s" (i.e. 15s), this will be interpreted to mean
+# actual seconds rather than a multiple of the interval_length variable.
+# Note: In addition to reading the external command file at regularly
+# scheduled intervals, Nagios will also check for external commands after
+# event handlers are executed.
+# NOTE: Setting this value to -1 causes Nagios to check the external
+# command file as often as possible.
+
+#command_check_interval=1
+#command_check_interval=15s
+command_check_interval=-1
+
+
+
+# EXTERNAL COMMAND FILE
+# This is the file that Nagios checks for external command requests.
+# It is also where the command CGI will write commands that are submitted
+# by users, so it must be writeable by the user that the web server
+# is running as (usually 'nobody'). Permissions should be set at the
+# directory level instead of on the file, as the file is deleted every
+# time its contents are processed.
+
+# Do not change as it will cause nagios to break
+# --alron
+command_file=/var/nagios/rw/nagios.cmd
+
+
+
+# COMMENT FILE
+# This is the file that Nagios will use for storing host and service
+# comments.
+
+# Also, do not change.
+# --alron
+comment_file=/var/nagios/comment.log
+
+
+
+# DOWNTIME FILE
+# This is the file that Nagios will use for storing host and service
+# downtime data.
+
+# Once again, do not change.
+# --alron
+downtime_file=/var/nagios/downtime.log
+
+
+
+# LOCK FILE
+# This is the lockfile that Nagios will use to store its PID number
+# in when it is running in daemon mode.
+
+# If you change this, it will BREAK nagios in a subtle and annoying way.
+# It will cause the gentoo init script for nagios not to understand
+# how to shut down nagios, and be unhappy.
+# --alron
+lock_file=/var/nagios/nagios.lock
+
+
+
+# TEMP FILE
+# This is a temporary file that is used as scratch space when Nagios
+# updates the status log, cleans the comment file, etc. This file
+# is created, used, and deleted throughout the time that Nagios is
+# running.
+
+# Changing this is a bad idea also.
+# --alron
+temp_file=/var/nagios/nagios.tmp
+
+
+
+# LOG ROTATION METHOD
+# This is the log rotation method that Nagios should use to rotate
+# the main log file. Values are as follows..
+# n = None - don't rotate the log
+# h = Hourly rotation (top of the hour)
+# d = Daily rotation (midnight every day)
+# w = Weekly rotation (midnight on Saturday evening)
+# m = Monthly rotation (midnight last day of month)
+
+log_rotation_method=d
+
+
+
+# LOG ARCHIVE PATH
+# This is the directory where archived (rotated) log files should be
+# placed (assuming you've chosen to do log rotation).
+
+# Yup, you guessed it. Do not change this either.
+# --alron
+log_archive_path=/var/nagios/archives
+
+
+
+# LOGGING OPTIONS
+# If you want messages logged to the syslog facility, as well as the
+# NetAlarm log file set this option to 1. If not, set it to 0.
+
+use_syslog=1
+
+
+
+# NOTIFICATION LOGGING OPTION
+# If you don't want notifications to be logged, set this value to 0.
+# If notifications should be logged, set the value to 1.
+
+log_notifications=1
+
+
+
+# SERVICE RETRY LOGGING OPTION
+# If you don't want service check retries to be logged, set this value
+# to 0. If retries should be logged, set the value to 1.
+
+log_service_retries=1
+
+
+
+# HOST RETRY LOGGING OPTION
+# If you don't want host check retries to be logged, set this value to
+# 0. If retries should be logged, set the value to 1.
+
+log_host_retries=1
+
+
+
+# EVENT HANDLER LOGGING OPTION
+# If you don't want host and service event handlers to be logged, set
+# this value to 0. If event handlers should be logged, set the value
+# to 1.
+
+log_event_handlers=1
+
+
+
+# INITIAL STATES LOGGING OPTION
+# If you want Nagios to log all initial host and service states to
+# the main log file (the first time the service or host is checked)
+# you can enable this option by setting this value to 1. If you
+# are not using an external application that does long term state
+# statistics reporting, you do not need to enable this option. In
+# this case, set the value to 0.
+
+log_initial_states=0
+
+
+
+# EXTERNAL COMMANDS LOGGING OPTION
+# If you don't want Nagios to log external commands, set this value
+# to 0. If external commands should be logged, set this value to 1.
+# Note: This option does not include logging of passive service
+# checks - see the option below for controlling whether or not
+# passive checks are logged.
+
+log_external_commands=1
+
+
+
+# PASSIVE SERVICE CHECKS LOGGING OPTION
+# If you don't want Nagios to log passive service checks, set this
+# value to 0. If passive service checks should be logged, set this
+# value to 1.
+
+log_passive_service_checks=1
+
+
+
+# GLOBAL HOST AND SERVICE EVENT HANDLERS
+# These options allow you to specify a host and service event handler
+# command that is to be run for every host or service state change.
+# The global event handler is executed immediately prior to the event
+# handler that you have optionally specified in each host or
+# service definition. The command argument is the short name of a
+# command definition that you define in your host configuration file.
+# Read the HTML docs for more information.
+
+#global_host_event_handler=somecommand
+#global_service_event_handler=somecommand
+
+
+
+# INTER-CHECK DELAY METHOD
+# This is the method that Nagios should use when initially
+# "spreading out" service checks when it starts monitoring. The
+# default is to use smart delay calculation, which will try to
+# space all service checks out evenly to minimize CPU load.
+# Using the dumb setting will cause all checks to be scheduled
+# at the same time (with no delay between them)! This is not a
+# good thing for production, but is useful when testing the
+# parallelization functionality.
+# n = None - don't use any delay between checks
+# d = Use a "dumb" delay of 1 second between checks
+# s = Use "smart" inter-check delay calculation
+# x.xx = Use an inter-check delay of x.xx seconds
+
+inter_check_delay_method=s
+
+
+
+# SERVICE CHECK INTERLEAVE FACTOR
+# This variable determines how service checks are interleaved.
+# Interleaving the service checks allows for a more even
+# distribution of service checks and reduced load on remote
+# hosts. Setting this value to 1 is equivalent to how versions
+# of Nagios previous to 0.0.5 did service checks. Set this
+# value to s (smart) for automatic calculation of the interleave
+# factor unless you have a specific reason to change it.
+# s = Use "smart" interleave factor calculation
+# x = Use an interleave factor of x, where x is a
+# number greater than or equal to 1.
+
+service_interleave_factor=s
+
+
+
+# MAXIMUM CONCURRENT SERVICE CHECKS
+# This option allows you to specify the maximum number of
+# service checks that can be run in parallel at any given time.
+# Specifying a value of 1 for this variable essentially prevents
+# any service checks from being parallelized. A value of 0
+# will not restrict the number of concurrent checks that are
+# being executed.
+
+max_concurrent_checks=0
+
+
+
+# SERVICE CHECK REAPER FREQUENCY
+# This is the frequency (in seconds!) that Nagios will process
+# the results of services that have been checked.
+
+service_reaper_frequency=10
+
+
+
+# SLEEP TIME
+# This is the number of seconds to sleep between checking for system
+# events and service checks that need to be run. I would recommend
+# *not* changing this from its default value of 1 second.
+
+sleep_time=1
+
+
+
+# TIMEOUT VALUES
+# These options control how much time Nagios will allow various
+# types of commands to execute before killing them off. Options
+# are available for controlling maximum time allotted for
+# service checks, host checks, event handlers, notifications, the
+# ocsp command, and performance data commands. All values are in
+# seconds.
+
+service_check_timeout=60
+host_check_timeout=30
+event_handler_timeout=30
+notification_timeout=30
+ocsp_timeout=5
+perfdata_timeout=5
+
+
+
+# RETAIN STATE INFORMATION
+# This setting determines whether or not Nagios will save state
+# information for services and hosts before it shuts down. Upon
+# startup Nagios will reload all saved service and host state
+# information before starting to monitor. This is useful for
+# maintaining long-term data on state statistics, etc, but will
+# slow Nagios down a bit when it (re)starts. Since its only
+# a one-time penalty, I think its well worth the additional
+# startup delay.
+
+retain_state_information=1
+
+
+
+# STATE RETENTION FILE
+# This is the file that Nagios should use to store host and
+# service state information before it shuts down. The state
+# information in this file is also read immediately prior to
+# starting to monitor the network when Nagios is restarted.
+# This file is used only if the preserve_state_information
+# variable is set to 1.
+
+# Changing this will also cause nagios to be unhappy, you have
+# been warned.
+# --alron
+state_retention_file=/var/nagios/status.sav
+
+
+
+# RETENTION DATA UPDATE INTERVAL
+# This setting determines how often (in minutes) that Nagios
+# will automatically save retention data during normal operation.
+# If you set this value to 0, Nagios will not save retention
+# data at regular interval, but it will still save retention
+# data before shutting down or restarting. If you have disabled
+# state retention, this option has no effect.
+
+retention_update_interval=60
+
+
+
+# USE RETAINED PROGRAM STATE
+# This setting determines whether or not Nagios will set
+# program status variables based on the values saved in the
+# retention file. If you want to use retained program status
+# information, set this value to 1. If not, set this value
+# to 0.
+
+use_retained_program_state=0
+
+
+
+# INTERVAL LENGTH
+# This is the seconds per unit interval as used in the
+# host/contact/service configuration files. Setting this to 60 means
+# that each interval is one minute long (60 seconds). Other settings
+# have not been tested much, so your mileage is likely to vary...
+
+interval_length=60
+
+
+
+# AGRESSIVE HOST CHECKING OPTION
+# If you don't want to turn on agressive host checking features, set
+# this value to 0 (the default). Otherwise set this value to 1 to
+# enable the agressive check option. Read the docs for more info
+# on what agressive host check is or check out the source code in
+# base/checks.c
+
+use_agressive_host_checking=0
+
+
+
+# SERVICE CHECK EXECUTION OPTION
+# This determines whether or not Nagios will actively execute
+# service checks when it initially starts. If this option is
+# disabled, checks are not actively made, but Nagios can still
+# receive and process passive check results that come in. Unless
+# you're implementing redundant hosts or have a special need for
+# disabling the execution of service checks, leave this enabled!
+# Values: 1 = enable checks, 0 = disable checks
+
+execute_service_checks=1
+
+
+
+# PASSIVE CHECK ACCEPTANCE OPTION
+# This determines whether or not Nagios will accept passive
+# service checks results when it initially (re)starts.
+# Values: 1 = accept passive checks, 0 = reject passive checks
+
+accept_passive_service_checks=1
+
+
+
+# NOTIFICATIONS OPTION
+# This determines whether or not Nagios will sent out any host or
+# service notifications when it is initially (re)started.
+# Values: 1 = enable notifications, 0 = disable notifications
+
+enable_notifications=1
+
+
+
+# EVENT HANDLER USE OPTION
+# This determines whether or not Nagios will run any host or
+# service event handlers when it is initially (re)started. Unless
+# you're implementing redundant hosts, leave this option enabled.
+# Values: 1 = enable event handlers, 0 = disable event handlers
+
+enable_event_handlers=1
+
+
+
+# PROCESS PERFORMANCE DATA OPTION
+# This determines whether or not Nagios will process performance
+# data returned from service and host checks. If this option is
+# enabled, host performance data will be processed using the
+# host_perfdata_command (defined below) and service performance
+# data will be processed using the service_perfdata_command (also
+# defined below). Read the HTML docs for more information on
+# performance data.
+# Values: 1 = process performance data, 0 = do not process performance data
+
+process_performance_data=0
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA PROCESSING COMMANDS
+# These commands are run after every host and service check is
+# performed. These commands are executed only if the
+# enable_performance_data option (above) is set to 1. The command
+# argument is the short name of a command definition that you
+# define in your host configuration file. Read the HTML docs for
+# more information on performance data.
+
+#host_perfdata_command=process-host-perfdata
+#service_perfdata_command=process-service-perfdata
+
+
+
+# OBSESS OVER SERVICE CHECKS OPTION
+# This determines whether or not Nagios will obsess over service
+# checks and run the ocsp_command defined below. Unless you're
+# planning on implementing distributed monitoring, do not enable
+# this option. Read the HTML docs for more information on
+# implementing distributed monitoring.
+# Values: 1 = obsess over services, 0 = do not obsess (default)
+
+obsess_over_services=0
+
+
+
+# OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND
+# This is the command that is run for every service check that is
+# processed by Nagios. This command is executed only if the
+# obsess_over_service option (above) is set to 1. The command
+# argument is the short name of a command definition that you
+# define in your host configuration file. Read the HTML docs for
+# more information on implementing distributed monitoring.
+
+#ocsp_command=somecommand
+
+
+
+# ORPHANED SERVICE CHECK OPTION
+# This determines whether or not Nagios will periodically
+# check for orphaned services. Since service checks are not
+# rescheduled until the results of their previous execution
+# instance are processed, there exists a possibility that some
+# checks may never get rescheduled. This seems to be a rare
+# problem and should not happen under normal circumstances.
+# If you have problems with service checks never getting
+# rescheduled, you might want to try enabling this option.
+# Values: 1 = enable checks, 0 = disable checks
+
+check_for_orphaned_services=0
+
+
+
+# SERVICE FRESHNESS CHECK OPTION
+# This option determines whether or not Nagios will periodically
+# check the "freshness" of service results. Enabling this option
+# is useful for ensuring passive checks are received in a timely
+# manner.
+# Values: 1 = enabled freshness checking, 0 = disable freshness checking
+
+check_service_freshness=1
+
+
+
+# FRESHNESS CHECK INTERVAL
+# This setting determines how often (in seconds) Nagios will
+# check the "freshness" of service check results. If you have
+# disabled service freshness checking, this option has no effect.
+
+freshness_check_interval=60
+
+
+
+# AGGREGATED STATUS UPDATES
+# This option determines whether or not Nagios will
+# aggregate updates of host, service, and program status
+# data. Normally, status data is updated immediately when
+# a change occurs. This can result in high CPU loads if
+# you are monitoring a lot of services. If you want Nagios
+# to only refresh status data every few seconds, disable
+# this option.
+# Values: 1 = enable aggregate updates, 0 = disable aggregate updates
+
+aggregate_status_updates=1
+
+
+
+# AGGREGATED STATUS UPDATE INTERVAL
+# Combined with the aggregate_status_updates option,
+# this option determines the frequency (in seconds!) that
+# Nagios will periodically dump program, host, and
+# service status data. If you are not using aggregated
+# status data updates, this option has no effect.
+
+status_update_interval=15
+
+
+
+# FLAP DETECTION OPTION
+# This option determines whether or not Nagios will try
+# and detect hosts and services that are "flapping".
+# Flapping occurs when a host or service changes between
+# states too frequently. When Nagios detects that a
+# host or service is flapping, it will temporarily supress
+# notifications for that host/service until it stops
+# flapping. Flap detection is very experimental, so read
+# the HTML documentation before enabling this feature!
+# Values: 1 = enable flap detection
+# 0 = disable flap detection (default)
+
+enable_flap_detection=0
+
+
+
+# FLAP DETECTION THRESHOLDS FOR HOSTS AND SERVICES
+# Read the HTML documentation on flap detection for
+# an explanation of what this option does. This option
+# has no effect if flap detection is disabled.
+
+low_service_flap_threshold=5.0
+high_service_flap_threshold=20.0
+low_host_flap_threshold=5.0
+high_host_flap_threshold=20.0
+
+
+
+# DATE FORMAT OPTION
+# This option determines how short dates are displayed. Valid options
+# include:
+# us (MM-DD-YYYY HH:MM:SS)
+# euro (DD-MM-YYYY HH:MM:SS)
+# iso8601 (YYYY-MM-DD HH:MM:SS)
+# strict-iso8601 (YYYY-MM-DDTHH:MM:SS)
+#
+
+date_format=us
+
+
+
+# ILLEGAL OBJECT NAME CHARACTERS
+# This options allows you to specify illegal characters that cannot
+# be used in host names, service descriptions, or names of other
+# object types.
+
+illegal_object_name_chars=`~!$%^&*|'"<>?,()=
+
+
+
+# ILLEGAL MACRO OUTPUT CHARACTERS
+# This options allows you to specify illegal characters that are
+# stripped from macros before being used in notifications, event
+# handlers, etc. This DOES NOT affect macros used in service or
+# host check commands.
+# The following macros are stripped of the characters you specify:
+# $OUTPUT$, $PERFDATA$
+
+illegal_macro_output_chars=`~$&|'"<>
+
+
+
+# ADMINISTRATOR EMAIL ADDRESS
+# The email address of the administrator of *this* machine (the one
+# doing the monitoring). Nagios never uses this value itself, but
+# you can access this value by using the $ADMINEMAIL$ macro in your
+# notification commands.
+
+admin_email=nagios
+
+
+
+# ADMINISTRATOR PAGER NUMBER/ADDRESS
+# The pager number/address for the administrator of *this* machine.
+# Nagios never uses this value itself, but you can access this
+# value by using the $ADMINPAGER$ macro in your notification
+# commands.
+
+admin_pager=pagenagios
+
+
+
+# EOF (End of file)
+
diff --git a/net-analyzer/nagios-core/nagios-core-1.0-r1.ebuild b/net-analyzer/nagios-core/nagios-core-1.0-r1.ebuild
new file mode 100644
index 000000000000..b3a3a8108920
--- /dev/null
+++ b/net-analyzer/nagios-core/nagios-core-1.0-r1.ebuild
@@ -0,0 +1,89 @@
+# Copyright 1999-2002 Gentoo Technologies, Inc.
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-analyzer/nagios-core/nagios-core-1.0-r1.ebuild,v 1.1 2003/02/12 06:32:53 alron Exp $
+DESCRIPTION="Nagios $PV core - Host and service monitor cgi, docs etc..."
+HOMEPAGE="http://www.nagios.org/"
+SRC_URI="mirror://sourceforge/nagios/nagios-1.0.tar.gz"
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="x86 ~sparc ~ppc"
+IUSE=""
+DEPEND=">=jpeg-6b-r2
+ >=libpng-1.2.4
+ >=libgd-1.8.3-r5
+ >=perl-5.6.1-r7
+ >=traceroute-1.4_p12
+ >=mailx-8.1
+ >=apache-1.3.27-r1"
+S="${WORKDIR}/nagios-1.0"
+
+src_compile() {
+ ./configure \
+ --host=${CHOST} \
+ --prefix=/usr/nagios \
+ --localstatedir=/var/nagios \
+ --sysconfdir=/etc/nagios \
+ --enable-embedded-perl \
+ --with-perlcache \
+ --infodir=/usr/share/info \
+ --mandir=/usr/share/man || die "./configure failed"
+ emake all || die
+}
+
+src_install() {
+ dodoc Changelog INSTALLING LEGAL LICENSE README UPGRADING
+ make DESTDIR=${D} COMMAND_OPTS="" INSTALL_OPTS="" install install-config install-commandmode || die
+ insinto /etc/apache/conf/addon-modules
+ doins ${FILESDIR}/nagios.conf
+ exeinto /etc/init.d
+ doexe ${FILESDIR}/nagios
+ insinto /etc/nagios
+ doins ${FILESDIR}/nagios.cfg-sample
+}
+pkg_preinst() {
+
+ userdel nagios 2> /dev/null
+ if ! groupmod nagios; then
+ groupadd -g 75 nagios 2> /dev/null || \
+ die "Failed to create nagios group"
+ fi
+ useradd -u 75 -g nagios -s /dev/null -d /var/empty -c "nagios" nagios || \
+ die "Failed to create nagios user"
+ chown -R nagios:nagios ${D}/etc/nagios || die "Failed Chown of ${D}/etc/nagios"
+ chown -R nagios:nagios ${D}/usr/nagios || die "Failed Chown of ${D}/usr/nagios"
+ chown -R nagios:nagios ${D}/var/nagios || die "Failed Chown of ${D}/var/nagios"
+ chown nagios:apache ${D}/var/nagios/rw || die "Failed Chown of ${D}/var/nagios/rw"
+}
+pkg_postinst() {
+ einfo
+ einfo "Remember to edit the config files in /etc/nagios"
+ einfo "Also, if you want nagios to start at boot time"
+ einfo "remember to execute rc-update add nagios default"
+ einfo
+ einfo "To have nagios visable on the web, please do the following:"
+ einfo "1. Execute the command:"
+ einfo " \"ebuild /var/db/pkg/net-analyzer/${PF}/${PF}.ebuild config\""
+ einfo " 2. Edit /etc/conf.d/apache and add \"-D NAGIOS\""
+ einfo
+ einfo "That will make nagios's web front end visable via"
+ einfo "http://localhost/nagios/"
+ einfo
+ einfo "The Apache config file for nagios will be in"
+ einfo "/etc/apache/conf/addon-modules/ with the name of"
+ einfo "nagios.conf."
+ einfo "Also, if your kernel has /proc protection, nagios"
+ einfo "will not be happy as it relies on accessing the proc"
+ einfo "filesystem."
+ einfo
+}
+
+pkg_config() {
+ echo "Include conf/addon-modules/nagios.conf" \
+ >> ${ROOT}/etc/apache/conf/apache.conf
+ einfo
+ einfo "Remember to edit /etc/conf.d/apache and add \"-D NAGIOS\""
+ einfo
+}
+pkg_prerm() {
+ /etc/init.d/nagios stop
+}