Version bump, bug #198030, remove old

(Portage version: 2.1.4.4)

6 files changed, 112 insertions, 419 deletions

diff --git a/sys-apps/lm_sensors/ChangeLog b/sys-apps/lm_sensors/ChangeLog
index 205fa1d1c045..f1bd4a162637 100644
--- a/sys-apps/lm_sensors/ChangeLog
+++ b/sys-apps/lm_sensors/ChangeLog
@@ -1,6 +1,15 @@
 # ChangeLog for sys-apps/lm_sensors
 # Copyright 1999-2008 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/lm_sensors/ChangeLog,v 1.85 2008/07/01 20:32:59 dberkholz Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-apps/lm_sensors/ChangeLog,v 1.86 2008/08/11 17:59:07 armin76 Exp $
+
+*lm_sensors-2.10.7 (11 Aug 2008)
+
+  11 Aug 2008; Raúl Porcel <armin76@gentoo.org>
+  -files/lm_sensors-2.10.1-sensors-detect-gentoo.patch,
+  +files/lm_sensors-2.10.7-sensors-detect-gentoo.patch,
+  -lm_sensors-2.10.1.ebuild, -lm_sensors-2.10.2.ebuild,
+  -lm_sensors-2.10.3.ebuild, +lm_sensors-2.10.7.ebuild:
+  Version bump, bug #198030, remove old
 
 *lm_sensors-3.0.2 (01 Jul 2008)
 
diff --git a/sys-apps/lm_sensors/files/lm_sensors-2.10.1-sensors-detect-gentoo.patch b/sys-apps/lm_sensors/files/lm_sensors-2.10.1-sensors-detect-gentoo.patch
deleted file mode 100644
index 748c56a31cac..000000000000
--- a/sys-apps/lm_sensors/files/lm_sensors-2.10.1-sensors-detect-gentoo.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-Index: lm_sensors-2.10.1/prog/detect/sensors-detect
-===================================================================
---- lm_sensors-2.10.1.orig/prog/detect/sensors-detect
-+++ lm_sensors-2.10.1/prog/detect/sensors-detect
-@@ -27,6 +27,9 @@
- # each be put in a separate file, using modules and packages. That is beyond
- # me.
- 
-+# Gentoo specific modifications based on a patch from Rudo Thomas
-+# <thomr9am@ss1000.ms.mff.cuni.cz>
-+
- require 5.004;
- 
- use strict;
-@@ -5420,40 +5423,47 @@ sub main
-      
-   print "\n";
-   my ($modprobes, $configfile) = generate_modprobes 1;	# 1 == prefer ISA
-+  print "\nIf you want to load the modules at startup, generate a config file\n",
-+        "below and make sure lm_sensors gets started at boot time; e.g\n",
-+        "\$ rc-update add lm_sensors default\n";
-   print "To make the sensors modules behave correctly, add these lines to\n".
--        "$modules_conf:\n\n";
-+        "/etc/modules.d/lm_sensors and run modules-update:\n\n";
-   print "#----cut here----\n".
-         $configfile.
-         "#----cut here----\n\n";
- 
--  print "To load everything that is needed, add this to some /etc/rc* file:\n\n";
--  print "#----cut here----\n".
--        $modprobes.
--        "# sleep 2 # optional\n".
--        "/usr/local/bin/sensors -s # recommended\n".
--        "#----cut here----\n\n";
--
-   print "If you have some drivers built into your kernel, the list above will\n".
-         "contain too many modules. Skip the appropriate ones! You really\n".
-         "should try these commands right now to make sure everything is\n".
-         "working properly. Monitoring programs won't work until the needed\n".
-         "modules are loaded.\n\n";
--  
--  my $have_sysconfig = -d '/etc/sysconfig';
--  printf "Do you want to \%s /etc/sysconfig/lm_sensors? (\%s): ",
--         (-e '/etc/sysconfig/lm_sensors' ? 'overwrite' : 'generate'),
--         ($have_sysconfig ? 'YES/no' : 'yes/NO');
--  $_ = <STDIN>;
--  if (($have_sysconfig and not m/^\s*n/i) or m/^\s*y/i) {
--    unless ($have_sysconfig) {
--      mkdir '/etc/sysconfig', 0777
--        or die "Sorry, can't create /etc/sysconfig ($!)";
--    }
--    open(local *SYSCONFIG, ">/etc/sysconfig/lm_sensors")
--      or die "Sorry, can't create /etc/sysconfig/lm_sensors ($!)";
--    print SYSCONFIG <<'EOT';
--#    /etc/sysconfig/lm_sensors - Defines modules loaded by
--#                                /etc/init.d/lm_sensors
-+
-+  print "To load everything that is needed, execute the commands below...";
-+
-+  print "\n\n#----cut here----\n";
-+  print $modprobes;
-+  print "# sleep 2 # optional\n",
-+        "/usr/bin/sensors -s # recommended\n";
-+  print "#----end cut here----\n";
-+
-+  my $have_config = -f '/etc/conf.d/lm_sensors';
-+  print "\nDo you want to ".($have_config?"overwrite":"generate").
-+	    " /etc/conf.d/lm_sensors? Enter s to specify other file name?\n",
-+        "  (".($have_config?"yes/NO":"YES/no")."/s): ";
-+  my $reply = <STDIN>;
-+
-+  if (($have_config and $reply =~ /^\s*[Yy]/) or
-+	  (not $have_config and not $reply =~ /^\s*[Nn]/) or
-+	  $reply =~ /^\s*[Ss]/) {
-+	  my $filename = "/etc/conf.d/lm_sensors";
-+	  if ($reply =~ /^\s*[Ss]/) {
-+		  print "Specify the file to store the configuration to: ";
-+		  $filename = <STDIN>;
-+	  }
-+	  open(SYSCONFIG, ">".$filename)
-+		  or die "Sorry, can't create $filename ($!).";
-+	  print SYSCONFIG <<'EOT';
-+#    /etc/conf.d/sensors - Defines modules loaded by /etc/init.d/lm_sensors
- #    Copyright (c) 1998 - 2001  Frodo Looijaard <frodol@dds.nl>
- #
- #    This program is free software; you can redistribute it and/or modify
-@@ -5481,12 +5491,21 @@ sub main
- # in order as normal variables with the special names:
- #    MODULE_0, MODULE_1, MODULE_2, etc.
- #
-+# Please note that the numbers in MODULE_X must start at 0 and increase in
-+# steps of 1. Any number that is missing will make the init script skip the
-+# rest of the modules. Use MODULE_X_ARGS for arguments.
-+#
- # List the modules that are to be loaded for your system
- #
- EOT
-     print SYSCONFIG
--      "# Generated by sensors-detect on " . scalar localtime() . "\n";
-+      "# Generated by sensors-detect on " . scalar localtime() . "\n\n";
-     my @modules = grep /^modprobe /, split "\n", $modprobes;
-+    print SYSCONFIG
-+		  "# Load modules at startup\n".
-+		  "LOADMODULES=yes\n\n".
-+		  "# Initialize sensors at startup\n".
-+		  "INITSENSORS=yes\n\n";
-     my $i = 0;
-     my $sysconfig = "";
-     foreach (@modules) {
-@@ -5495,10 +5514,8 @@ EOT
-       $i++;
-     }
-     print SYSCONFIG $sysconfig;
-+    print "Done.\n";
- 
--    print "Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors\n".
--          "for initialization at boot time.\n"
--      unless -f "/etc/init.d/lm_sensors";
-   }
- }
- 
diff --git a/sys-apps/lm_sensors/files/lm_sensors-2.10.7-sensors-detect-gentoo.patch b/sys-apps/lm_sensors/files/lm_sensors-2.10.7-sensors-detect-gentoo.patch
new file mode 100644
index 000000000000..7da7acc2f22c
--- /dev/null
+++ b/sys-apps/lm_sensors/files/lm_sensors-2.10.7-sensors-detect-gentoo.patch
@@ -0,0 +1,99 @@
+diff -u ../../../lm_sensors-2.10.7.orig/prog/detect/sensors-detect ./sensors-detect
+--- ../../../lm_sensors-2.10.7.orig/prog/detect/sensors-detect	2008-07-19 10:26:32.000000000 +0200
++++ ./sensors-detect	2008-07-19 11:01:16.000000000 +0200
+@@ -27,6 +27,9 @@
+ # each be put in a separate file, using modules and packages. That is beyond
+ # me.
+ 
++# Gentoo specific modifications based on a patch from Rudo Thomas
++# <thomr9am@ss1000.ms.mff.cuni.cz>
++
+ require 5.004;
+ 
+ use strict;
+@@ -5899,29 +5902,40 @@
+       print MODPROBE_D $configfile;
+       close(MODPROBE_D);
+     } else {
++      print "\nIf you want to load the modules at startup, generate a config file\n",
++            "below and make sure lm_sensors gets started at boot time; e.g\n",
++            "\$ rc-update add lm_sensors default\n";
+       print "To make the sensors modules behave correctly, add these lines to\n".
+-            "$modules_conf:\n\n";
++            "/etc/modules.d/lm_sensors and run update-modules:\n\n";
+       print "#----cut here----\n".
+             $configfile.
+             "#----cut here----\n\n";
+     }
+   }
+ 
+-  my $have_sysconfig = -d '/etc/sysconfig';
+-  printf "Do you want to \%s /etc/sysconfig/lm_sensors? (\%s): ",
+-         (-e '/etc/sysconfig/lm_sensors' ? 'overwrite' : 'generate'),
++  print "To load everything that is needed, execute the commands below...";
++
++  print "\n\n#----cut here----\n";
++  print $modprobes;
++  print "# sleep 2 # optional\n",
++        "/usr/bin/sensors -s # recommended\n";
++  print "#----end cut here----\n";
++
++  my $have_sysconfig = -f '/etc/conf.d/lm_sensors';
++  printf "Do you want to \%s /etc/conf.d/lm_sensors? Enter s for other filename (\%s/s): ",
++         ($have_sysconfig ? 'overwrite' : 'generate'),
+          ($have_sysconfig ? 'YES/no' : 'yes/NO');
+   $_ = <STDIN>;
+-  if (($have_sysconfig and not m/^\s*n/i) or m/^\s*y/i) {
+-    unless ($have_sysconfig) {
+-      mkdir '/etc/sysconfig', 0777
+-        or die "Sorry, can't create /etc/sysconfig ($!)";
++  if (m/^\s*s/i or ($have_sysconfig and not m/^\s*n/i) or m/^\s*y/i) {
++    my $filename = '/etc/conf.d/lm_sensors';
++    if (m/^\s*s/i) {
++      print "Specify the file to store the configuration to: ";
++      $filename = <STDIN>;
+     }
+-    open(local *SYSCONFIG, ">/etc/sysconfig/lm_sensors")
+-      or die "Sorry, can't create /etc/sysconfig/lm_sensors ($!)";
++    open(local *SYSCONFIG, ">$filename")
++      or die "Sorry, can't create $filename ($!)";
+     print SYSCONFIG <<'EOT';
+-#    /etc/sysconfig/lm_sensors - Defines modules loaded by
+-#                                /etc/init.d/lm_sensors
++#    /etc/conf.d/sensors - Defines modules loaded by /etc/init.d/lm_sensors
+ #    Copyright (c) 1998 - 2001  Frodo Looijaard <frodol@dds.nl>
+ #
+ #    This program is free software; you can redistribute it and/or modify
+@@ -5950,12 +5964,21 @@
+ # in order as normal variables with the special names:
+ #    MODULE_0, MODULE_1, MODULE_2, etc.
+ #
++# Please note that the numbers in MODULE_X must start at 0 and increase in
++# steps of 1. Any number that is missing will make the init script skip the
++# rest of the modules. Use MODULE_X_ARGS for arguments.
++#
+ # List the modules that are to be loaded for your system
+ #
+ EOT
+     print SYSCONFIG
+       "# Generated by sensors-detect on " . scalar localtime() . "\n";
+     my @modules = grep /^modprobe /, split "\n", $modprobes;
++    print SYSCONFIG
++         "# Load modules at startup\n".
++         "LOADMODULES=yes\n\n".
++         "# Initialize sensors at startup\n".
++         "INITSENSORS=yes\n\n";
+     my $i = 0;
+     my $sysconfig = "";
+     foreach (@modules) {
+@@ -5966,9 +5989,7 @@
+     print SYSCONFIG $sysconfig;
+     close(SYSCONFIG);
+ 
+-    print "Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors\n".
+-          "for initialization at boot time.\n"
+-      unless -f "/etc/init.d/lm_sensors";
++    print "Done.\n";
+ 
+     if (-x "/sbin/insserv" && -f "/etc/init.d/lm_sensors") {
+       system("/sbin/insserv", "/etc/init.d/lm_sensors");
diff --git a/sys-apps/lm_sensors/lm_sensors-2.10.1.ebuild b/sys-apps/lm_sensors/lm_sensors-2.10.1.ebuild
deleted file mode 100644
index b268098c29f0..000000000000
--- a/sys-apps/lm_sensors/lm_sensors-2.10.1.ebuild
+++ /dev/null
@@ -1,147 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/lm_sensors/lm_sensors-2.10.1.ebuild,v 1.13 2008/04/07 02:18:54 vapier Exp $
-
-inherit eutils flag-o-matic linux-info toolchain-funcs multilib
-
-DESCRIPTION="Hardware Monitoring user-space utilities"
-
-HOMEPAGE="http://www.lm-sensors.org/"
-SRC_URI="http://dl.lm-sensors.org/lm-sensors/releases/${P}.tar.gz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ppc x86"
-
-IUSE="sensord"
-
-COMMON="sys-fs/sysfsutils
-		!sys-apps/i2c-tools
-		sensord? ( net-analyzer/rrdtool )"
-DEPEND="${COMMON}
-		sys-apps/sed
-		ppc? ( >=virtual/linux-sources-2.5 )
-		amd64? ( || ( >=virtual/linux-sources-2.5 >=sys-kernel/vserver-sources-2.0 ) )
-		x86? ( || ( >=virtual/linux-sources-2.5 >=sys-kernel/vserver-sources-2.0 sys-apps/lm_sensors-modules ) )"
-RDEPEND="${COMMON}
-		dev-lang/perl
-		virtual/logger"
-
-pkg_setup() {
-	linux-info_pkg_setup
-
-	if kernel_is 2 4; then
-		if use ppc || use amd64; then
-			eerror
-			eerror "${P} does not support kernel 2.4.x under PPC and AMD64."
-			eerror
-			die "${P} does not support kernel 2.4.x under PPC and AMD64."
-		elif ! has_version =sys-apps/lm_sensors-modules-${PV}; then
-			eerror
-			eerror "${P} needs sys-apps/lm_sensors-modules-${PV} to be installed"
-			eerror "for kernel 2.4.x"
-			eerror
-			die "sys-apps/lm_sensors-modules-${PV} not installed"
-		fi
-	else
-		if kernel_is lt 2 6 14 && ! (linux_chkconfig_present I2C_SENSOR); then
-			eerror
-			eerror "${P} requires CONFIG_I2C_SENSOR to be enabled for non-2.4.x kernels."
-			eerror
-			die "CONFIG_I2C_SENSOR not detected"
-		elif kernel_is gt 2 6 13 && ! (linux_chkconfig_present HWMON); then
-			eerror
-			eerror "${P} requires CONFIG_HWMON to be enabled for 2.6.14+ kernels."
-			eerror
-			die "CONFIG_HWMON not detected"
-		fi
-		if ! (linux_chkconfig_present I2C_CHARDEV); then
-			ewarn
-			ewarn "sensors-detect requires CONFIG_I2C_CHARDEV to be enabled for non-2.4.x kernels."
-			ewarn
-		fi
-		if ! (linux_chkconfig_present I2C); then
-			ewarn
-			ewarn "${P} requires CONFIG_I2C to be enabled for non-2.4.x kernels for most sensors."
-			ewarn
-		fi
-	fi
-}
-
-src_unpack() {
-	unpack ${A}
-
-	cd "${S}"
-	epatch "${FILESDIR}"/${P}-sensors-detect-gentoo.patch
-
-	if use sensord; then
-		sed -i -e 's:^# \(PROG_EXTRA\):\1:' "${S}"/Makefile
-	fi
-}
-
-src_compile()  {
-	einfo
-	einfo "You may safely ignore any errors from compilation"
-	einfo "that contain \"No such file or directory\" references."
-	einfo
-
-	filter-flags -fstack-protector
-
-	emake CC=$(tc-getCC) LINUX=${KV_DIR} I2C_HEADERS=${KV_DIR}/include user \
-		|| die "emake user failed"
-}
-
-src_install() {
-	emake DESTDIR="${D}" PREFIX=/usr MANDIR=/usr/share/man LIBDIR=/usr/$(get_libdir) \
-		KERNELINCLUDEFILES="" user_install || die "emake user_install failed"
-
-	newinitd "${FILESDIR}"/lm_sensors-init.d lm_sensors
-	newinitd "${FILESDIR}"/fancontrol-init.d fancontrol
-
-	if use sensord; then
-		newconfd "${FILESDIR}"/sensord-conf.d sensord
-		newinitd "${FILESDIR}"/sensord-init.d sensord
-	fi
-
-	dodoc BACKGROUND BUGS CHANGES CONTRIBUTORS INSTALL QUICKSTART \
-		README* TODO
-
-	dodoc doc/donations doc/fancontrol.txt doc/fan-divisors doc/FAQ \
-		doc/progs doc/temperature-sensors doc/vid
-
-	dohtml doc/lm_sensors-FAQ.html doc/useful_addresses.html
-
-	docinto busses
-	dodoc doc/busses/*
-
-	docinto chips
-	dodoc doc/chips/*
-
-	docinto developers
-	dodoc doc/developers/applications doc/developers/design \
-		doc/developers/new_drivers doc/developers/proc \
-		doc/developers/sysctl doc/developers/sysfs-interface
-}
-
-pkg_postinst() {
-	elog
-	elog "Please run \`/usr/sbin/sensors-detect' in order to setup"
-	elog "/etc/conf.d/lm_sensors."
-	elog
-	elog "/etc/conf.d/lm_sensors is vital to the init-script."
-	elog "Please make sure you also add lm_sensors to the desired"
-	elog "runlevel. Otherwise your I2C modules won't get loaded"
-	elog "on the next startup."
-	elog
-	elog "You will also need to run the above command if you're upgrading from"
-	elog "<=${PN}-2.9.0, as the needed entries in /etc/conf.d/lm_sensors has"
-	elog "changed."
-	elog
-	elog "Be warned, the probing of hardware in your system performed by"
-	elog "sensors-detect could freeze your system. Also make sure you read"
-	elog "the documentation before running lm_sensors on IBM ThinkPads."
-	elog
-	elog "Please refer to the lm_sensors documentation for more information."
-	elog "(http://www.lm-sensors.org/wiki/Documentation)"
-	elog
-}
diff --git a/sys-apps/lm_sensors/lm_sensors-2.10.2.ebuild b/sys-apps/lm_sensors/lm_sensors-2.10.2.ebuild
deleted file mode 100644
index e0ef677f939d..000000000000
--- a/sys-apps/lm_sensors/lm_sensors-2.10.2.ebuild
+++ /dev/null
@@ -1,147 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/lm_sensors/lm_sensors-2.10.2.ebuild,v 1.7 2008/04/07 02:18:54 vapier Exp $
-
-inherit eutils flag-o-matic linux-info toolchain-funcs multilib
-
-DESCRIPTION="Hardware Monitoring user-space utilities"
-
-HOMEPAGE="http://www.lm-sensors.org/"
-SRC_URI="http://dl.lm-sensors.org/lm-sensors/releases/${P}.tar.gz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~ppc ~x86"
-
-IUSE="sensord"
-
-COMMON="sys-fs/sysfsutils
-		!sys-apps/i2c-tools
-		sensord? ( net-analyzer/rrdtool )"
-DEPEND="${COMMON}
-		sys-apps/sed
-		ppc? ( >=virtual/linux-sources-2.5 )
-		amd64? ( || ( >=virtual/linux-sources-2.5 >=sys-kernel/vserver-sources-2.0 ) )
-		x86? ( || ( >=virtual/linux-sources-2.5 >=sys-kernel/vserver-sources-2.0 sys-apps/lm_sensors-modules ) )"
-RDEPEND="${COMMON}
-		dev-lang/perl
-		virtual/logger"
-
-pkg_setup() {
-	linux-info_pkg_setup
-
-	if kernel_is 2 4; then
-		if use ppc || use amd64; then
-			eerror
-			eerror "${P} does not support kernel 2.4.x under PPC and AMD64."
-			eerror
-			die "${P} does not support kernel 2.4.x under PPC and AMD64."
-		elif ! has_version =sys-apps/lm_sensors-modules-${PV}; then
-			eerror
-			eerror "${P} needs sys-apps/lm_sensors-modules-${PV} to be installed"
-			eerror "for kernel 2.4.x"
-			eerror
-			die "sys-apps/lm_sensors-modules-${PV} not installed"
-		fi
-	else
-		if kernel_is lt 2 6 14 && ! (linux_chkconfig_present I2C_SENSOR); then
-			eerror
-			eerror "${P} requires CONFIG_I2C_SENSOR to be enabled for non-2.4.x kernels."
-			eerror
-			die "CONFIG_I2C_SENSOR not detected"
-		elif kernel_is gt 2 6 13 && ! (linux_chkconfig_present HWMON); then
-			eerror
-			eerror "${P} requires CONFIG_HWMON to be enabled for 2.6.14+ kernels."
-			eerror
-			die "CONFIG_HWMON not detected"
-		fi
-		if ! (linux_chkconfig_present I2C_CHARDEV); then
-			ewarn
-			ewarn "sensors-detect requires CONFIG_I2C_CHARDEV to be enabled for non-2.4.x kernels."
-			ewarn
-		fi
-		if ! (linux_chkconfig_present I2C); then
-			ewarn
-			ewarn "${P} requires CONFIG_I2C to be enabled for non-2.4.x kernels for most sensors."
-			ewarn
-		fi
-	fi
-}
-
-src_unpack() {
-	unpack ${A}
-
-	cd "${S}"
-	epatch "${FILESDIR}"/${PN}-2.10.1-sensors-detect-gentoo.patch
-
-	if use sensord; then
-		sed -i -e 's:^# \(PROG_EXTRA\):\1:' "${S}"/Makefile
-	fi
-}
-
-src_compile()  {
-	einfo
-	einfo "You may safely ignore any errors from compilation"
-	einfo "that contain \"No such file or directory\" references."
-	einfo
-
-	filter-flags -fstack-protector
-
-	emake CC=$(tc-getCC) LINUX=${KV_DIR} I2C_HEADERS=${KV_DIR}/include user \
-		|| die "emake user failed"
-}
-
-src_install() {
-	emake DESTDIR="${D}" PREFIX=/usr MANDIR=/usr/share/man LIBDIR=/usr/$(get_libdir) \
-		KERNELINCLUDEFILES="" user_install || die "emake user_install failed"
-
-	newinitd "${FILESDIR}"/lm_sensors-init.d lm_sensors
-	newinitd "${FILESDIR}"/fancontrol-init.d fancontrol
-
-	if use sensord; then
-		newconfd "${FILESDIR}"/sensord-conf.d sensord
-		newinitd "${FILESDIR}"/sensord-init.d sensord
-	fi
-
-	dodoc BACKGROUND BUGS CHANGES CONTRIBUTORS INSTALL QUICKSTART \
-		README* TODO
-
-	dodoc doc/donations doc/fancontrol.txt doc/fan-divisors doc/FAQ \
-		doc/progs doc/temperature-sensors doc/vid
-
-	dohtml doc/lm_sensors-FAQ.html doc/useful_addresses.html
-
-	docinto busses
-	dodoc doc/busses/*
-
-	docinto chips
-	dodoc doc/chips/*
-
-	docinto developers
-	dodoc doc/developers/applications doc/developers/design \
-		doc/developers/new_drivers doc/developers/proc \
-		doc/developers/sysctl doc/developers/sysfs-interface
-}
-
-pkg_postinst() {
-	elog
-	elog "Please run \`/usr/sbin/sensors-detect' in order to setup"
-	elog "/etc/conf.d/lm_sensors."
-	elog
-	elog "/etc/conf.d/lm_sensors is vital to the init-script."
-	elog "Please make sure you also add lm_sensors to the desired"
-	elog "runlevel. Otherwise your I2C modules won't get loaded"
-	elog "on the next startup."
-	elog
-	elog "You will also need to run the above command if you're upgrading from"
-	elog "<=${PN}-2.9.0, as the needed entries in /etc/conf.d/lm_sensors has"
-	elog "changed."
-	elog
-	elog "Be warned, the probing of hardware in your system performed by"
-	elog "sensors-detect could freeze your system. Also make sure you read"
-	elog "the documentation before running lm_sensors on IBM ThinkPads."
-	elog
-	elog "Please refer to the lm_sensors documentation for more information."
-	elog "(http://www.lm-sensors.org/wiki/Documentation)"
-	elog
-}
diff --git a/sys-apps/lm_sensors/lm_sensors-2.10.3.ebuild b/sys-apps/lm_sensors/lm_sensors-2.10.7.ebuild
index de45162b8e1a..0f99e7ffcbe1 100644
--- a/sys-apps/lm_sensors/lm_sensors-2.10.3.ebuild
+++ b/sys-apps/lm_sensors/lm_sensors-2.10.7.ebuild
@@ -1,6 +1,6 @@
 # Copyright 1999-2008 Gentoo Foundation
 # Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/lm_sensors/lm_sensors-2.10.3.ebuild,v 1.8 2008/04/07 02:18:54 vapier Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-apps/lm_sensors/lm_sensors-2.10.7.ebuild,v 1.1 2008/08/11 17:59:07 armin76 Exp $
 
 inherit eutils flag-o-matic linux-info toolchain-funcs multilib
 
@@ -11,7 +11,7 @@ SRC_URI="http://dl.lm-sensors.org/lm-sensors/releases/${P}.tar.gz"
 
 LICENSE="GPL-2"
 SLOT="0"
-KEYWORDS="~alpha ~amd64 ~ppc ~x86"
+KEYWORDS="~alpha ~amd64 ~ppc ~sparc ~x86"
 
 IUSE="sensord"
 
@@ -73,7 +73,7 @@ src_unpack() {
 	unpack ${A}
 
 	cd "${S}"
-	epatch "${FILESDIR}"/${PN}-2.10.1-sensors-detect-gentoo.patch
+	epatch "${FILESDIR}"/${PN}-2.10.7-sensors-detect-gentoo.patch
 
 	if use sensord; then
 		sed -i -e 's:^# \(PROG_EXTRA\):\1:' "${S}"/Makefile