New snapshot.

(Portage version: 2.0.51.22-r1)

3 files changed, 1855 insertions, 1 deletions

diff --git a/x11-base/xorg-x11/ChangeLog b/x11-base/xorg-x11/ChangeLog
index 8c7b5e7abf5f..c6d81e353a21 100644
--- a/x11-base/xorg-x11/ChangeLog
+++ b/x11-base/xorg-x11/ChangeLog
@@ -1,6 +1,12 @@
 # ChangeLog for x11-base/xorg-x11
 # Copyright 2000-2005 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-x11/ChangeLog,v 1.410 2005/06/11 09:40:47 fmccor Exp $
+# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-x11/ChangeLog,v 1.411 2005/06/27 07:22:24 spyderous Exp $
+
+*xorg-x11-6.8.99.13 (27 Jun 2005)
+
+  27 Jun 2005; Donnie Berkholz <spyderous@gentoo.org>;
+  +xorg-x11-6.8.99.13.ebuild:
+  New snapshot.
 
   11 Jun 2005; Ferris McCormick <fmccor@gentoo.org>
   xorg-x11-6.8.2-r2.ebuild:
diff --git a/x11-base/xorg-x11/files/digest-xorg-x11-6.8.99.13 b/x11-base/xorg-x11/files/digest-xorg-x11-6.8.99.13
new file mode 100644
index 000000000000..30c883b6d3a3
--- /dev/null
+++ b/x11-base/xorg-x11/files/digest-xorg-x11-6.8.99.13
@@ -0,0 +1,7 @@
+MD5 4d7d5fdc4ed56c144ef998302581478c eurofonts-X11.tar.bz2 8811
+MD5 01a21c248e5ac4ba02cbbea994fc774a xfsft-encodings-0.1.tar.bz2 11892
+MD5 d0fab996daf97adf095e2dad0bd9012e gentoo-cursors-tad-0.3.1.tar.bz2 1196991
+MD5 3d4ee581df78c9dacc6e97aa07a1af72 gemini-koi8-u.tar.bz2 439173
+MD5 bbb645b2570915516f871295dd3deaee xorg-x11-6.8.99.13-files-0.1.tar.bz2 10097
+MD5 0dead2c6a3e1afdde88075f0894305d7 xorg-x11-6.8.99.13-patches-0.1.1.tar.bz2 118991
+MD5 14781aa072a633678bc65a7a55e58f74 xorg-x11-6.8.99.13.tar.bz2 45016561
diff --git a/x11-base/xorg-x11/xorg-x11-6.8.99.13.ebuild b/x11-base/xorg-x11/xorg-x11-6.8.99.13.ebuild
new file mode 100644
index 000000000000..4e7db834358b
--- /dev/null
+++ b/x11-base/xorg-x11/xorg-x11-6.8.99.13.ebuild
@@ -0,0 +1,1841 @@
+# Copyright 1999-2005 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-x11/xorg-x11-6.8.99.13.ebuild,v 1.1 2005/06/27 07:22:24 spyderous Exp $
+
+# Set TDFX_RISKY to "yes" to get 16-bit, 1024x768 or higher on low-memory
+# voodoo3 cards.
+
+# Libraries which are now supplied in shared form that were not in the past
+# include:  libFS.so, libGLw.so, libI810XvMC.so, libXRes.so, libXfontcache.so,
+# libXinerama.so, libXss.so, libXvMC.so, libXxf86rush.so, libfontenc.so,
+# libxkbfile.so, libxkbui.so
+
+# TODO
+# 1 June 2005 <spyderous@gentoo.org>
+#   TARGET: none
+#		Consider building shared libraries only, when both are provided
+#		Combine find loops for "Creating fonts.scale files," "Generating
+#			fonts.dir files and "Generating Xft cache"
+#		<Mr_Bones_> the loop in pkg_postinst for removing Compose can probably
+#			be one line of bash expansion like rm -f ${ROOT}/usr/$(get_libdir)/
+#			X11/locale/{ja*|ko*|zh*}/Compose
+#		Clean up migration function
+#			- loop through lib* instead of repetition
+#		Fix direction of lib -> libdir symlink
+#		Generalize any functions that make sense to generalize (i.e., anything
+#			that might realistically see use elsewhere, or repetitively here)
+inherit eutils flag-o-matic toolchain-funcs x11 linux-info multilib
+
+
+# Make sure Portage does _NOT_ strip symbols.  We will do it later and make sure
+# that only we only strip stuff that are safe to strip ...
+RESTRICT="nostrip"
+
+# IUSE="gatos" disabled because gatos is broken on ~4.4 now (31 Jan 2004)
+IUSE="3dfx 3dnow bitmap-fonts cjk debug dlloader dmx doc font-server
+	insecure-drivers ipv6 minimal mmx nls opengl pam sdk sse static
+	truetype-fonts type1-fonts uclibc xprint xv"
+# IUSE_INPUT_DEVICES="synaptics wacom"
+
+FILES_VER="0.1"
+PATCH_VER="0.1.1"
+XCUR_VER="0.3.1"
+XFSFT_ENC_VER="0.1"
+
+S=${WORKDIR}/xc
+
+HOMEPAGE="http://xorg.freedesktop.org/"
+
+# Misc patches we may need to fetch ..
+X_PATCHES="http://dev.gentoo.org/~spyderous/${PN}/patchsets/${PV}/${P}-patches-${PATCH_VER}.tar.bz2
+	http://dev.gentoo.org/~cyfred/distfiles/${P}-patches-${PATCH_VER}.tar.bz2
+	mirror://gentoo/${P}-patches-${PATCH_VER}.tar.bz2"
+
+GENTOO_FILES="http://dev.gentoo.org/~spyderous/${PN}/patchsets/${PV}/${P}-files-${FILES_VER}.tar.bz2
+	http://dev.gentoo.org/~cyfred/distfiles/${P}-files-${FILES_VER}.tar.bz2
+	mirror://gentoo/${P}-files-${FILES_VER}.tar.bz2"
+
+SRC_URI="!minimal? ( mirror://gentoo/eurofonts-X11.tar.bz2 )
+	font-server? ( http://dev.gentoo.org/~cyfred/xorg/${PN}/patchsets/${PV}/xfsft-encodings-${XFSFT_ENC_VER}.tar.bz2 )
+	!minimal? ( mirror://gentoo/gentoo-cursors-tad-${XCUR_VER}.tar.bz2 )
+	nls? ( mirror://gentoo/gemini-koi8-u.tar.bz2 )
+	${GENTOO_FILES}
+	${X_PATCHES}
+	http://xorg.freedesktop.org/snapshots/${P}.tar.bz2"
+#	http://xorg.freedesktop.org/X11R${PV}/src-single/X11R${PV}-src.tar.bz2"
+#	http://xorg.freedesktop.org/X11R${PV}/src/X11R${PV}-src1.tar.gz
+#	http://xorg.freedesktop.org/X11R${PV}/src//X11R${PV}-src2.tar.gz
+#	http://xorg.freedesktop.org/X11R${PV}/src//X11R${PV}-src3.tar.gz
+#	http://xorg.freedesktop.org/X11R${PV}/src//X11R${PV}-src4.tar.gz
+#	http://xorg.freedesktop.org/X11R${PV}/src//X11R${PV}-src5.tar.gz
+#	doc? (
+#		http://xorg.freedesktop.org/X11R${PV}/src//X11R${PV}-src6.tar.gz
+#		http://xorg.freedesktop.org/X11R${PV}/src//X11R${PV}-src7.tar.gz
+#	)"
+
+LICENSE="Adobe-X CID DEC DEC-2 IBM-X NVIDIA-X NetBSD SGI UCB-LBL XC-2
+	bigelow-holmes-urw-gmbh-luxi christopher-g-demetriou national-semiconductor
+	nokia tektronix the-open-group todd-c-miller x-truetype xfree86-1.0
+	MIT SGI-B BSD || ( FTL GPL-2 )"
+SLOT="0"
+KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc -ppc64 ~sparc ~x86"
+
+DEPEND=">=sys-libs/ncurses-5.1
+	>=sys-libs/zlib-1.1.3-r2
+	>=sys-devel/flex-2.5.4a-r5
+	>=dev-libs/expat-1.95.3
+	>=media-libs/freetype-2.1.8
+	>=media-libs/fontconfig-2.1-r1
+	opengl? ( >=x11-base/opengl-update-2.2.0 )
+	>=x11-misc/ttmkfdir-3.0.9-r2
+	>=sys-apps/sed-4
+	sys-apps/util-linux
+	dev-lang/perl
+	media-libs/libpng
+	!<=app-emulation/emul-linux-x86-xlibs-1.2-r3
+	!virtual/xft
+	!virtual/x11"
+# x11-libs/xft -- blocked because of interference with xorg's
+
+RDEPEND="
+		>=sys-libs/zlib-1.1.3-r2
+		>=sys-devel/flex-2.5.4a-r5
+		>=dev-libs/expat-1.95.3
+		>=media-libs/freetype-2.1.8
+		>=media-libs/fontconfig-2.1-r1
+		opengl? ( >=x11-base/opengl-update-2.2.0 )
+		>=x11-misc/ttmkfdir-3.0.9-r2
+		media-libs/libpng
+		>=sys-libs/ncurses-5.1
+		!<=app-emulation/emul-linux-x86-xlibs-1.2-r3
+		!virtual/xft
+		!virtual/x11"
+
+PDEPEND="x86? (
+			3dfx? ( >=media-libs/glide-v3-3.10 )
+			input_devices_synaptics? ( x11-misc/synaptics )
+			input_devices_wacom? ( x11-misc/linuxwacom )
+		)
+		alpha? (
+			3dfx? ( >=media-libs/glide-v3-3.10 )
+		)
+		!uclibc? ( x11-terms/xterm )"
+
+PROVIDE="virtual/x11
+	opengl? virtual/opengl
+	opengl? virtual/glu
+	virtual/xft"
+
+DESCRIPTION="An X11 implementation maintained by the X.Org Foundation"
+
+pkg_setup() {
+	FILES_DIR="${WORKDIR}/files"
+	PATCHDIR="${WORKDIR}/patch"
+	EXCLUDED="${PATCHDIR}/excluded"
+
+	# Set up CFLAG-related things
+	cflag_setup
+
+	# See bug #35468, circular pam-X11 dep
+	check_pam
+
+	# Look for invalid/dangerous USE flags and combinations
+	check_use_combos
+
+	setup_multilib
+}
+
+src_unpack() {
+	unpack_all
+
+	patch_setup
+
+	do_patch
+
+	host_def_setup
+
+	use_specific_hacks
+}
+
+src_compile() {
+	build
+}
+
+src_install() {
+	install_everything
+
+	backward_compat_install
+
+	fix_permissions
+
+	# We zap our CFLAGS in the host.def file, as hardcoded CFLAGS can
+	# mess up other things that use xmkmf
+	zap_host_def_cflags
+
+	# EURO support
+	if ! use minimal; then
+		add_euro_support
+	fi
+
+	setup_standard_symlinks
+
+	if use opengl; then
+		fix_opengl_symlinks
+	fi
+
+	libtool_archive_install
+
+	compose_files_install
+
+	if use font-server; then
+		encode_xfsft_files
+	fi
+
+	if use nls; then
+		koi8_fonts_install
+	fi
+
+	etc_files_install
+
+	if use opengl; then
+		dynamic_libgl_install
+	fi
+
+	fix_libtool_libdir_paths "$(find ${D} -name *.la)"
+
+	cursor_install
+
+	strip_execs
+
+	if use minimal; then
+		minimal_install
+	fi
+
+	# TEMPORARY hack: should be patched in, if it's not already
+	# For Battoussai's gatos stuffs:
+	if use sdk; then
+		insinto /usr/$(get_libdir)/Server/include
+		doins ${S}/extras/drm/shared/drm.h
+	fi
+
+	xprint_install
+
+	config_files_install
+}
+
+pkg_preinst() {
+	# Do migration before anything else, so we do all the rest inside the
+	# symlink
+
+	# Get rid of "standard" symlinks
+	# We can't overwrite symlink with directory w/ $(mv -f)
+	[ -L ${ROOT}usr/$(get_libdir)/X11 ] \
+		&& rm ${ROOT}usr/$(get_libdir)/X11
+	[ -L ${ROOT}usr/include/X11 ] \
+		&& rm ${ROOT}usr/include/X11
+	[ -L ${ROOT}usr/include/GL ] \
+		&& rm ${ROOT}usr/include/GL
+	[ -L ${ROOT}usr/bin/X11 ] \
+		&& rm ${ROOT}usr/bin/X11
+	# Get rid of some apparent artifacts of migration
+	[ -L ${ROOT}usr/include/GL/GL ] \
+		&& rm ${ROOT}usr/include/GL/GL
+	[ -L ${ROOT}usr/include/X11/X11 ] \
+		&& rm ${ROOT}usr/include/X11/X11
+	[ -d ${ROOT}usr/share/fonts/fonts ] \
+		&& rm -rf ${ROOT}usr/share/fonts/fonts
+
+	# No need to do this, if it's already been done
+	# Also, it'll overwrite a ton of stuff because it won't realize /usr/X11R6
+	# is a symlink.
+	if [ ! -L "/usr/X11R6" ]; then
+		# Migrate stuff in /usr/X11R6 to /usr
+		local DIR DIRS
+		DIRS="bin include lib"
+		if [ "lib" != "$(get_libdir)" ]; then
+			DIRS="${DIRS} $(get_libdir)"
+		fi
+		for DIR in ${DIRS}; do
+			migrate /usr/X11R6/${DIR} /usr/${DIR}
+		done
+		# Can't do this in the other loop because of different start and end
+		migrate /usr/X11R6/man /usr/share/man
+	fi
+
+	update_config_files
+
+	cleanup_fonts
+
+	# See above comment for the same test
+	if [ ! -L "/usr/X11R6" ]; then
+		# Needs to happen after cleanup_fonts()
+		migrate /usr/X11R6/$(get_libdir)/X11/fonts /usr/share/fonts
+
+		# Get rid of symlinks so we can migrate /usr/X11R6 without dying when a
+		# symlink tries to copy to a dir
+		einfo "Preparing for /usr/X11R6 -> /usr migration..."
+		local LINK LINKS
+		LINKS="bin include lib man share/info"
+		if [ "lib" != "$(get_libdir)" ]; then
+			LINKS="${LINKS} $(get_libdir)"
+		fi
+		for LINK in ${LINKS}; do
+			if [ -L "${ROOT}/usr/X11R6/${LINK}" ]; then
+				rm -fv ${ROOT}/usr/X11R6/${LINK}
+			fi
+		done
+		einfo "Remaining symlinks in /usr/X11R6:"
+		find ${ROOT}/usr/X11R6/ -type l
+
+		# Woohoo, nothing in /usr/X11R6 after this
+		migrate /usr/X11R6 /usr
+	fi
+
+	move_app_defaults_to_etc
+
+	move_xkb_to_usr
+
+	# Run this even for USE=-opengl, to clean out old stuff from possible
+	# USE=opengl build
+	dynamic_libgl_preinst
+}
+
+pkg_postinst() {
+	env-update
+
+	if [ "${ROOT}" = "/" ]; then
+		font_setup
+
+		if use opengl; then
+			switch_opengl_implem
+		fi
+	fi
+
+	remove_old_compose_files
+
+	setup_tmp_files
+
+	print_info
+}
+
+pkg_postrm() {
+	fix_links
+}
+
+###############
+# pkg_setup() #
+###############
+
+cflag_setup() {
+	# Set up CFLAGS
+	filter-flags "-funroll-loops"
+
+	ALLOWED_FLAGS="-fstack-protector -march -mcpu -mtune -O -O0 -O1 -O2 -O3 -Os"
+	ALLOWED_FLAGS="${ALLOWED_FLAGS} -pipe -fomit-frame-pointer"
+	ALLOWED_FLAGS="${ALLOWED_FLAGS} -momit-leaf-frame-pointer"
+	ALLOWED_FLAGS="${ALLOWED_FLAGS} -g -g0 -g1 -g2 -g3"
+	ALLOWED_FLAGS="${ALLOWED_FLAGS} -ggdb -ggdb0 -ggdb1 -ggdb2 -ggdb3"
+	# arch-specific section added by popular demand
+	case "${ARCH}" in
+		mips)	ALLOWED_FLAGS="${ALLOWED_FLAGS} -mips1 -mips2 -mips3 -mips4 -mabi"
+			;;
+		# -fomit-frame-pointer known to break things and is pointless
+		# according to ciaranm
+		# And hardened compiler must be softened. -- fmccor, 20.viii.04
+		sparc)	filter-flags "-fomit-frame-pointer" "-momit-leaf-frame-pointer"
+			if has_hardened && ! use dlloader; then
+				einfo "Softening gcc for sparc."
+				ALLOWED_FLAGS="${ALLOWED_FLAGS} -fno-pie -fno-PIE"
+				append-flags -fno-pie -fno-PIE
+			fi
+
+			if [[ ${ABI} == "sparc64" ]]; then
+				ALLOWED_FLAGS="${ALLOWED_FLAGS} -D__sparc_v9__ -D__linux_sparc_64__"
+				append-flags -D__sparc_v9__ -D__linux_sparc_64__
+			fi
+			;;
+		# gcc-3.3.2 causes invalid insn error
+		hppa ) replace-cpu-flags 2.0 1.0
+			;;
+	esac
+
+	# Recently there has been a lot of stability problem in Gentoo-land.  Many
+	# things can be the cause to this, but I believe that it is due to gcc3
+	# still having issues with optimizations, or with it not filtering bad
+	# combinations (protecting the user maybe from themselves) yet.
+	#
+	# This can clearly be seen in large builds like glibc, where too aggressive
+	# CFLAGS cause the tests to fail miserbly.
+	#
+	# Quote from Nick Jones <carpaski@gentoo.org>, who in my opinion
+	# knows what he is talking about:
+	#
+	#   People really shouldn't force code-specific options on... It's a
+	#   bad idea. The -march options aren't just to look pretty. They enable
+	#   options that are sensible (and include sse,mmx,3dnow when appropriate).
+	#
+	# The next command strips CFLAGS and CXXFLAGS from nearly all flags.  If
+	# you do not like it, comment it, but do not bugreport if you run into
+	# problems.
+	#
+	# <azarah@gentoo.org> (13 Oct 2002)
+	strip-flags
+}
+
+check_pam() {
+	if use pam && best_version x11-base/${PN}; then
+		einfo "Previous ${PN} installation detected."
+		einfo "Enabling PAM features in ${PN}."
+	else
+		einfo "Previous ${PN} installation NOT detected."
+		einfo "Disabling PAM features in ${PN}."
+		einfo "You must remerge ${PN} to enable pam."
+		einfo "See http://bugs.gentoo.org/show_bug.cgi?id=35468."
+	fi
+}
+
+check_use_combos() {
+	if use static; then
+		# A static build disallows building the SDK.
+		# See config/xf86.rules.
+		if use sdk; then
+			die "The static USE flag is incompatible with the sdk USE flag."
+		fi
+	fi
+
+	# (#90672)
+	if use sdk && ! use dlloader; then
+		MSG="The sdk and -dlloader USE flags are temporarily incompatible and result in a dead build."
+		einfo ${MSG}
+		einfo "See http://bugs.gentoo.org/show_bug.cgi?id=90672."
+		die ${MSG}
+	fi
+
+	# (#77949)
+	if use minimal && use doc; then
+		die "The minimal and doc USE flags are incompatible and result in a dead build."
+	fi
+
+	if use xv && ! use opengl; then
+		eerror "See http://bugs.gentoo.org/show_bug.cgi?id=67996"
+		eerror "The xv USE flag currently requires the opengl flag."
+		die "This is a known bug. Do not report it."
+	fi
+
+	if use opengl && ! use xv; then
+		eerror "See http://bugs.gentoo.org/show_bug.cgi?id=76936"
+		eerror "The opengl USE flag currently requires the xv flag."
+		die "This is a known bug. Do not report it."
+	fi
+
+	# Echo a message to the user about bitmap-fonts
+	if ! use bitmap-fonts; then
+		ewarn "Please emerge this with USE=\"bitmap-fonts\" to enable"
+		ewarn "75dpi and 100dpi fonts.  Your GTK+-1.2 fonts may look"
+		ewarn "screwy otherwise"
+
+		ebeep 5
+		epause 10
+	fi
+}
+
+setup_multilib() {
+	# on amd64 we need /usr/lib64/X11/locale/lib to be a symlink
+	# created by the emul lib ebuild in order for adobe acrobat, staroffice,
+	# and a few other apps to work.
+	if ! has_multilib_profile; then
+		use amd64 && get_libdir_override lib64
+	fi
+}
+
+################
+# src_unpack() #
+################
+
+unpack_all() {
+	# Unpack source and patches
+	ebegin "Unpacking ${PV} source"
+		unpack ${P}.tar.bz2 > /dev/null
+#		unpack X11R${PV}-src.tar.bz2 > /dev/null
+#		unpack X11R${PV}-src{1,2,3,4,5}.tar.gz > /dev/null
+	eend 0
+
+#	if use doc; then
+#		ebegin "Unpacking documentation"
+#			unpack X11R${PV}-src{6,7}.tar.gz > /dev/null
+#		eend 0
+#	fi
+
+	ebegin "Unpacking Gentoo files and patches"
+		unpack ${P}-files-${FILES_VER}.tar.bz2 > /dev/null
+		unpack ${P}-patches-${PATCH_VER}.tar.bz2 > /dev/null
+	eend 0
+
+	if ! use minimal; then
+		# Unpack TaD's gentoo cursors
+		ebegin "Unpacking Gentoo cursors"
+			unpack gentoo-cursors-tad-${XCUR_VER}.tar.bz2 > /dev/null
+		eend 0
+	fi
+
+	# Unpack extra fonts stuff from Mandrake
+	ebegin "Unpacking fonts"
+		if use nls; then
+			unpack gemini-koi8-u.tar.bz2 > /dev/null
+		fi
+		unpack eurofonts-X11.tar.bz2 > /dev/null
+		if use font-server; then
+			unpack xfsft-encodings-${XFSFT_ENC_VER}.tar.bz2 > /dev/null
+		fi
+	eend 0
+
+	# Remove bum encoding
+	rm -f ${WORKDIR}/usr/share/fonts/encodings/urdunaqsh-0.enc
+}
+
+do_patch() {
+	# Bulk patching - based on patch name
+	# Will create excluded stuff once it's needed
+	cd ${WORKDIR}
+	EPATCH_SUFFIX="patch" \
+	epatch ${PATCHDIR}
+	cd ${S}
+}
+
+host_def_setup() {
+	HOSTCONF="config/cf/host.def"
+
+	ebegin "Setting up ${HOSTCONF}"
+		cd ${S}; cp ${FILES_DIR}/site.def ${HOSTCONF} \
+			|| die "host.def copy failed"
+		echo "#define XVendorString \"Gentoo (The X.Org Foundation ${PV}, revision ${PR}-${PATCH_VER})\"" \
+			>> ${HOSTCONF}
+
+		# Pending http://bugs.gentoo.org/show_bug.cgi?id=49038 and
+		# http://freedesktop.org/cgi-bin/bugzilla/show_bug.cgi?id=600
+		#
+		# Makes ld bail at link time on undefined symbols
+		# Suggested by Mike Harris <mharris@redhat.com>
+		#echo "#define SharedLibraryLoadFlags  -shared -Wl,-z,defs" \
+		#	>> ${HOSTCONF}
+
+		# Enable i810 on x86_64 (RH #126687)
+		if use amd64; then
+			echo "#define XF86ExtraCardDrivers i810" >> ${HOSTCONF}
+		fi
+
+		# FHS install locations
+		echo "#define ManDirectoryRoot /usr/share/man" >> ${HOSTCONF}
+		echo "#define DocDir /usr/share/doc/${PF}" >> ${HOSTCONF}
+		echo "#define FontDir /usr/share/fonts" >> ${HOSTCONF}
+		# Single quotes so FONTDIR doesn't get run
+		echo '#define FontEncDir $(FONTDIR)/encodings' >> ${HOSTCONF}
+		echo "#define BinDir /usr/bin" >> ${HOSTCONF}
+		echo "#define IncRoot /usr/include" >> ${HOSTCONF}
+		# This breaks the case when $(SYSTEMUSRINCDIR) = $(INCDIR)
+		# See xc/include/Imakefile
+		echo "#define LinkGLToUsrInclude NO" >> ${HOSTCONF}
+		# /usr/X11R6/lib/X11
+		echo "#define LibDir /usr/$(get_libdir)/X11" >> ${HOSTCONF}
+		# /usr/X11R6/lib with exception of /usr/X11R6/lib/X11
+		echo "#define UsrLibDir /usr/$(get_libdir)" >> ${HOSTCONF}
+
+		# Make man4 and man7 stuff get 'x' suffix like everything else
+		# Necessary so we can install to /usr/share/man without overwriting
+		echo "#define DriverManDir \$(MANSOURCEPATH)4" >> ${HOSTCONF}
+		echo "#define DriverManSuffix 4x /* use just one tab or cpp will die */" \
+			>> ${HOSTCONF}
+		echo "#define MiscManDir \$(MANSOURCEPATH)7" >> ${HOSTCONF}
+		echo "#define MiscManSuffix 7x /* use just one tab or cpp will die */" \
+			>> ${HOSTCONF}
+
+		# Don't build xterm -- use external (#54051)
+		echo "#define BuildXterm NO" >> ${HOSTCONF}
+
+		# Xwrapper has been removed so we now need to use the set uid server
+		# again, this mustve happened somewhere after 4.3.0 in the development.
+		echo "#define InstallXserverSetUID YES" >> ${HOSTCONF}
+		echo "#define BuildServersOnly NO" >> ${HOSTCONF}
+
+		# Don't use /lib64 if $(get_libdir) != lib64
+		# Replaces 0181_all_4.3.0-amd64-nolib64.patch
+		if [ "$(get_libdir)" == "lib64" ]; then
+			echo "#define HaveLib64 YES" >> ${HOSTCONF}
+			sed -i '/^#define Freetype2LibDir/s:^.*$:#define Freetype2LibDir /usr/lib64:' ${HOSTCONF}
+		else
+			echo "#define HaveLib64 NO" >> ${HOSTCONF}
+		fi
+
+		# Set location of DRM source to be installed
+		echo "#define InstSrcDir ${ROOT}/usr/src/${PF}" >> ${HOSTCONF}
+
+		if [ "$(gcc-major-version)" -eq "3" ]; then
+			if use x86; then
+				# Should fix bug #4189.  gcc 3.x have problems with
+				# -march=pentium4 and -march=athlon-tbird
+				# Seems fixed on 3.3 and higher
+				if [ "$(gcc-minor-version)" -le "2" ]; then
+					replace-cpu-flags pentium4 pentium3
+					replace-cpu-flags athlon athlon-tbird
+				fi
+
+				if [ "$(gcc-minor-version)" -eq "4" ]; then
+					if [ "$(gcc-micro-version)" -lt "4" ]; then
+						#to fix #57602 for now, thanks Spanky (broken sse2)
+						if test_flag -mno-sse2; then
+							append-flags -mno-sse2
+						fi
+						# (#75067) broken sse3
+						if test_flag -mno-sse3; then
+							append-flags -mno-sse3
+						fi
+					fi
+				fi
+
+				# Try a fix for #49310, see #50931 for more info. <spyderous>
+				if [ "$(is-flag -fomit-frame-pointer)" ]; then
+					replace-cpu-flags k6 k6-2 k6-3 i586
+				fi
+			fi
+
+			# Without this, modules breaks with gcc3
+			if [ "$(gcc-minor-version)" -eq "1" ]; then
+				append-flags "-fno-merge-constants"
+				append-flags "-fno-merge-constants"
+			fi
+
+			if [ "$(gcc-minor-version)" -eq "2" ]; then
+				if [ "$(gcc-micro-version)" -lt "2" ]; then
+					# Bug #12775 .. fails with -Os.
+					replace-flags "-Os" "-O2"
+				fi
+			elif [ "$(gcc-minor-version)" -lt "2" ]; then
+				# Bug #12775 .. fails with -Os.
+				replace-flags "-Os" "-O2"
+			fi
+		elif [ "$(gcc-major-version)" -lt "3" ]; then
+			# Bug #12775 .. fails with -Os.
+			replace-flags "-Os" "-O2"
+		fi
+
+		echo "#define CcCmd $(tc-getCC)" >> ${HOSTCONF}
+		echo "#define OptimizedCDebugFlags ${CFLAGS} GccAliasingArgs" >> ${HOSTCONF}
+		echo "#define OptimizedCplusplusDebugFlags ${CXXFLAGS} GccAliasingArgs" >> ${HOSTCONF}
+
+		if use static; then
+			echo "#define DoLoadableServer	NO" >>${HOSTCONF}
+		else
+			einfo "Setting DoLoadableServer to YES."
+			echo "#define DoLoadableServer  YES" >> ${HOSTCONF}
+
+			if use dlloader; then
+				einfo "Setting MakeDllModules to YES."
+				echo "#define MakeDllModules    YES" >> ${HOSTCONF}
+				if has_hardened; then
+					echo "#define HardenedGccSpecs YES" >> ${HOSTCONF}
+				fi
+			else
+				einfo "Setting MakeDllModules to NO."
+				echo "#define MakeDllModules    NO" >> ${HOSTCONF}
+			fi
+		fi
+
+		use_build debug XFree86Devel
+		use_build debug BuildDebug
+		use_build debug DebuggableLibraries
+
+		if ! use debug; then
+			# use less ram .. got this from Spider's makeedit.eclass :)
+			echo "#define GccWarningOptions -Wno-return-type -w" \
+				>> ${HOSTCONF}
+		fi
+
+		# Remove circular dep between pam and X11, bug #35468
+		# If pam is in USE and we have X11, then we can enable PAM
+#		if use pam && [ "$(best_version x11-base/xorg-x11)" ]
+		if [ "$(best_version x11-base/xorg-x11)" ]; then
+			# If you want to have optional pam support, do it properly ...
+			use_build pam HasPam
+			use_build pam HasPamMisc
+		fi
+
+		if use x86 || use alpha; then
+			# build with glide3 support? (build the tdfx_dri.o module)
+			if use 3dfx; then
+				echo "#define HasGlide3 YES" >> ${HOSTCONF}
+			fi
+# 			This won't work unless we can disable building the tdfx stuff
+# 			entirely :/
+#			use_build 3dfx HasGlide3
+		fi
+
+		if use x86; then
+			# optimize Mesa for architecture
+			use_build mmx HasMMXSupport
+			use_build 3dnow Has3DNowSupport
+			use_build sse HasSSESupport
+		fi
+
+		# optimize Mesa for architecture
+		if use amd64; then
+			use_build amd64 HasMMXSupport
+			use_build amd64 Has3DNowSupport
+			use_build amd64 HasSSESupport
+		fi
+
+		# Do we want the glx extension? This will turn off XF86DRI if it's off.
+		# DRI can't build if glx isn't built, so keep this below DRI define.
+		# Do this before hppa so they can turn DRI off
+		use_build opengl BuildGlxExt
+		use_build opengl BuildGLXLibrary
+		use_build opengl BuildXF86DRI
+		# Needs GL headers
+		use_build opengl BuildGLULibrary
+
+
+
+		if use mips; then
+			echo "#define XF86CardDrivers fbdev newport" >> ${HOSTCONF}
+		fi
+
+		# Make xv optional for more minimal builds
+		use_build xv BuildXvLibrary
+		use_build xv BuildXvExt
+		# Depends on X11/extensions/Xv.h
+		use_build xv BuildXF86RushExt
+		use_build xv BuildXF86RushLibrary
+
+		if use hppa; then
+			echo "#define DoLoadableServer NO" >> ${HOSTCONF}
+			echo "#define BuildXF86DRI NO" >> config/cf/host.def
+			echo "#undef DriDrivers" >> config/cf/host.def
+			echo "#define XF86CardDrivers fbdev" >> config/cf/host.def
+			echo "#define BuildXvExt YES" >> config/cf/host.def
+		fi
+
+
+		if use alpha; then
+			echo "#define XF86CardDrivers mga nv tga s3virge sis rendition \
+				i740 tdfx cirrus tseng fbdev \
+				ati vga v4l glint s3 vesa" >> ${HOSTCONF}
+		fi
+
+		if use ppc; then
+			echo "#define XF86CardDrivers mga glint s3virge sis savage trident \
+				chips tdfx fbdev ati DevelDrivers vga nv imstt \
+				XF86OSCardDrivers XF86ExtraCardDrivers" >> ${HOSTCONF}
+		fi
+
+		if use ppc64; then
+			echo "#define MakeDllModules YES" >> ${HOSTCONF}
+			echo "#define XF86VgaHw YES" >> ${HOSTCONF}
+			echo "#define XF86FBDevHw YES" >> ${HOSTCONF}
+			echo "#define XF86CardDrivers mga fbdev v4l ati vga nv" >> ${HOSTCONF}
+		fi
+
+		if use sparc; then
+			echo "#define XF86CardDrivers sunffb sunleo suncg6 suncg3 suncg14 \
+			suntcx sunbw2 glint mga tdfx ati savage vesa vga fbdev \
+			XF86OSCardDrivers XF86ExtraCardDrivers \
+			DevelDrivers" >> ${HOSTCONF}
+			if has_hardened && ! use dlloader; then
+				einfo "Softening the assembler so cfb modules will play nice with sunffb."
+				echo "#define AsCmd CcCmd -c -x assembler -fno-pie -fno-PIE" >> ${HOSTCONF}
+				echo "#define ModuleAsCmd CcCmd -c -x assembler -fno-pie -fno-PIE" >> ${HOSTCONF}
+			fi
+			if ( [ -e "${ROOT}/usr/src/linux" ] \
+				&& ! kernel_is "2" "6" ) \
+				|| [ "$(uname -r | cut -d. -f1,2)" != "2.6" ]; then
+				einfo "Building for kernels less than 2.6 requires special treatment."
+				echo "#define UseDeprecatedKeyboardDriver YES" >> ${HOSTCONF}
+				einfo "Avoid bug #46593 for sparc32-SMP with kernel 2.4.xx."
+				echo "/* Add a line to avoid bug #56593 on sparc32 */" >> \
+				  programs/Xserver/hw/xfree86/drivers/ati/r128_driver.c
+			fi
+		fi
+
+		# The definitions for fontconfig
+		echo "#define UseFontconfig YES" >> ${HOSTCONF}
+		echo "#define HasFontconfig YES" >> ${HOSTCONF}
+
+		# Use the xorg Xft2 lib
+		echo "#define SharedLibXft YES" >> ${HOSTCONF}
+
+		# with USE="X doc' circular dep w/ virtual/ghostscript
+		# echo "#define HasGhostScript ${DOC}" >> ${HOSTCONF}
+		# Caused issues, basic docs aren't installed
+		use_build doc BuildLinuxDocPS
+		use_build doc BuildSpecsDocs
+		use_build doc BuildHtmlManPages
+		use_build doc InstallHardcopyDocs
+
+		# enable Japanese docs, optionally
+		use doc && use_build cjk InstallJapaneseDocs
+
+		# Native Language Support Fonts
+		use_build nls BuildCyrillicFonts
+		use_build nls BuildArabicFonts
+		use_build nls BuildGreekFonts
+		use_build nls BuildHebrewFonts
+		use_build nls BuildThaiFonts
+
+		if use nls; then
+			use_build cjk BuildCIDFonts
+			use_build cjk BuildJapaneseFonts
+			use_build cjk BuildKoreanFonts
+			use_build cjk BuildChineseFonts
+		fi
+
+		# Crappy bitmap fonts
+		use_build bitmap-fonts Build75DpiFonts
+		use_build bitmap-fonts Build100DpiFonts
+
+		# Type1 fonts
+		use_build type1-fonts BuildType1Fonts
+
+		# TrueType fonts
+		use_build truetype-fonts BuildTrueTypeFonts
+
+		# X Font Server
+		use_build font-server BuildFontServer
+
+		# Distributed Multiheaded X
+		use_build dmx BuildDmx
+
+		use_build insecure-drivers BuildDevelDRIDrivers
+
+		if use ipv6; then
+			# In case Gentoo ever works on a system with IPv6 sockets that don't
+			# also listen on IPv4 (see config/cf/X11.tmpl)
+			echo "#define PreferXdmcpIPv6 YES" >> ${HOSTCONF}
+		fi
+
+		use_build ipv6 BuildIPv6
+
+		if use minimal; then
+			# Don't build static libs
+			echo "#define ForceNormalLib NO" >> ${HOSTCONF}
+			# Turn back on needed ones
+			echo "#define NormalLibXau YES" >> ${HOSTCONF}
+
+			echo "#define BuildDPSLibraries NO" >> ${HOSTCONF}
+			echo "#define BuildClients NO" >> ${HOSTCONF}
+			# BuildClients doesn't catch things in xc/programs/Xserver
+			# Also had to add
+			# 9250_all_6.8.1.904-respect-xfree86configtools-setting.patch
+			echo "#define BuildXFree86ConfigTools NO" >> ${HOSTCONF}
+			echo "#define BuildLBX NO" >> ${HOSTCONF}
+
+			# Weird crap we don't need
+			echo "#define XF8_32Wid NO" >> ${HOSTCONF}
+			echo "#define XF8_32Bpp NO" >> ${HOSTCONF}
+			echo "#define XF8_16Bpp NO" >> ${HOSTCONF}
+			echo "#define XF24_32Bpp NO" >> ${HOSTCONF}
+
+			# Without nls, truetype-fonts, type1-fonts, we only build misc
+			# Now let's try to reduce what gets built in misc
+			# iso8859-1 has the "fixed" font
+			echo "#define BuildISO8859_2Fonts NO" >> ${HOSTCONF}
+			echo "#define BuildISO8859_3Fonts NO" >> ${HOSTCONF}
+			echo "#define BuildISO8859_4Fonts NO" >> ${HOSTCONF}
+			# 5 is cyrillic, 6 isn't in misc, 7 is greek, 8 is hebrew
+			echo "#define BuildISO8859_9Fonts NO" >> ${HOSTCONF}
+			echo "#define BuildISO8859_10Fonts NO" >> ${HOSTCONF}
+			# 11 is thai, 12 isn't in misc
+			echo "#define BuildISO8859_13Fonts NO" >> ${HOSTCONF}
+			echo "#define BuildISO8859_14Fonts NO" >> ${HOSTCONF}
+			echo "#define BuildISO8859_15Fonts NO" >> ${HOSTCONF}
+			echo "#define BuildISO8859_16Fonts NO" >> ${HOSTCONF}
+
+			echo "#define XnestServer NO" >> ${HOSTCONF}
+			echo "#define XVirtualFramebufferServer NO" >> ${HOSTCONF}
+			echo "#define XInputDrivers mouse keyboard" >> ${HOSTCONF}
+
+			# Don't want to add to defaults for other archs, set above
+			if use x86; then
+				# If you want more drivers built with minimal, file a bug
+				# -Donnie Berkholz <spyderous@gentoo.org>
+				# Remove glint, tga, s3, s3virge, rendition, neomagic, i740,
+				# cirrus, tseng, trident, chips, apm, ark, cyrix, siliconmotion
+				# mga, nv, sis, tdfx, savage, GlideDriver, i386Drivers
+				# (nsc, i810), ati, DevelDrivers, via
+				# Leave vmware driver for testing minimal setups using VMWare
+				# XF86OSCardDrivers includes v4l and fbdev on linux
+				# DevelDrivers includes imstt and newport on x86
+				echo "#define XF86CardDrivers vmware vesa vga dummy \
+					XF86OSCardDrivers XF86ExtraCardDrivers" >> ${HOSTCONF}
+			fi
+		fi
+
+		# Ajax is the man for getting this going for us
+		echo "#define ProPoliceSupport YES" >> ${HOSTCONF}
+
+		# Make xprint optional
+		use_build xprint BuildXprint
+		# Build libXp even when xprint is off. It's just for clients, server
+		if ! use xprint; then
+			echo "#define BuildXprintLib YES" >> ${HOSTCONF}
+		fi
+
+	# End the host.def definitions here
+	eend 0
+}
+
+patch_setup() {
+	einfo "Excluding patches..."
+
+		patch_exclude 9020 9030
+		patch_exclude 9913 9914 9915 9920
+
+		# This patch is just plain broken. Results in random failures.
+		patch_exclude 0120*parallel-make
+
+		# Hardened patches (both broken)
+		patch_exclude 9960_all_4.3.0-exec-shield-GNU
+		patch_exclude 9961_all_4.3.0-libGL-exec-shield
+
+		# Xbox nvidia driver, patch is a total hack, tears apart xc/config/cf
+		# (#68726). Only apply when necessary so we don't screw other stuff up.
+		# 9990 is the driver, 9991 is xbox pci scanning (potentially useful)
+		if [ ! "${PROFILE_ARCH}" = "xbox" ]; then
+			patch_exclude 9990 9991
+		fi
+
+		# this patch comments out the Xserver line in xdm's config
+		# We only want it here
+		if ! use s390; then
+			patch_exclude 7500
+		fi
+
+	#	if ! use gatos; then
+	#		patch_exclude 9841_all_4.3.0-gatos-mesa
+	#	fi
+
+		if use debug; then
+			patch_exclude 5901*acecad-debug
+		fi
+
+		# TDFX_RISKY - 16-bit, 1024x768 or higher on low-memory voodoo3's
+		if use 3dfx && [ "${TDFX_RISKY}" = "yes" ]; then
+			patch_exclude 5850
+		else
+			patch_exclude 5851
+		fi
+
+		# Glibc-specific patches to exclude for non-glibc systems
+		if use elibc_FreeBSD || use elibc_OpenBSD; then
+			patch_exclude 0700
+		fi
+	einfo "Done excluding patches."
+}
+
+use_specific_hacks() {
+	# uclibc lacks sinf and cosf
+	if use uclibc; then
+		sed -i -e 's:GLXCLIENTDIRS = glxinfo glxgears:GLXCLIENTDIRS = :' \
+			${S}/programs/Imakefile
+	fi
+
+	# Get rid of cursor sets other than core and handhelds, saves ~4MB
+	if use minimal; then
+		 sed -i -e 's:SUBDIRS = redglass whiteglass handhelds:SUBDIRS = handhelds:' \
+			${S}/programs/xcursorgen/Imakefile
+	fi
+
+	cd ${S}
+	if use doc; then
+		# These are not included anymore as they are obsolete
+		local x
+		for x in ${S}/programs/Xserver/hw/xfree86/{XF98Conf.cpp,XF98Config}; do
+			if [ -f ${x} ]; then
+				sed -i '/Load[[:space:]]*"\(pex5\|xie\)"/d' ${x}
+			fi
+		done
+	fi
+}
+
+#################
+# src_compile() #
+#################
+
+build() {
+	# If a user defines the MAKE_OPTS variable in /etc/make.conf instead of
+	# MAKEOPTS, they'll redefine an internal xorg Makefile variable and the
+	# xorg build will silently die. This is tricky to track down, so I'm
+	# adding a preemptive fix for this issue by making sure that MAKE_OPTS is
+	# unset. (drobbins, 08 Mar 2003)
+	unset MAKE_OPTS
+
+	einfo "Building xorg-x11..."
+	if use debug; then
+		chmod u+x ${S}/config/util/makeg.sh
+		FAST=1 ${S}/config/util/makeg.sh World WORLDOPTS="" \
+			|| die "debug make World failed"
+	else
+		FAST=1 emake World WORLDOPTS="" MAKE="make" || die "make World failed"
+	fi
+
+	if use nls; then
+		emake -C ${S}/nls MAKE="make" || die "nls build failed"
+	fi
+}
+
+#################
+# src_install() #
+#################
+
+install_everything() {
+	unset MAKE_OPTS
+
+	einfo "Installing X.org X11..."
+	# gcc3 related fix.  Do this during install, so that our
+	# whole build will not be compiled without mmx instructions.
+	if [ "$(gcc-version)" != "2.95" ] && use x86; then
+		make install MAKE="make" DESTDIR=${D} \
+		|| make CDEBUGFLAGS="${CDEBUGFLAGS} -mno-mmx" \
+			CXXDEBUGFLAGS="${CXXDEBUGFLAGS} -mno-mmx" \
+			install MAKE="make" DESTDIR=${D} || die "install failed"
+	else
+		make install MAKE="make" DESTDIR=${D} || die "install failed"
+	fi
+
+	if use sdk; then
+		einfo "Installing X.org X11 SDK..."
+		make install.sdk MAKE="make" DESTDIR=${D} || die "sdk install failed"
+	fi
+
+	if ! use minimal; then
+		einfo "Installing man pages..."
+		make install.man MAKE="make" DESTDIR=${D} || die "man page install failed"
+		einfo "Compressing man pages..."
+		prepman /usr
+	fi
+
+	if use nls; then
+		cd ${S}/nls
+		make MAKE="make" DESTDIR=${D} install || die "nls install failed"
+	fi
+	dodoc ${S}/RELNOTES
+}
+
+backward_compat_install() {
+	# Backwards compatibility for /usr/share move
+	dosym ../../share/fonts /usr/$(get_libdir)/X11/fonts
+
+	# Have the top-level libdir symlink made first, so real dirs don't get created
+	local DIR DIRS
+	if [ "lib" != "$(get_libdir)" ]; then
+		DIRS="${DIRS} $(get_libdir)"
+	fi
+	for DIR in ${DIRS}; do
+		dosym ../${DIR} /usr/X11R6/${DIR}
+	done
+
+	dosym ../../../share/doc/${PF} /usr/X11R6/$(get_libdir)/X11/doc
+}
+
+fix_permissions() {
+	# Fix permissions on locale/common/*.so
+	local x
+	for x in ${D}/usr/$(get_libdir)/X11/locale/$(get_libdir)/common/*.so*; do
+		if [ -f ${x} ]; then
+			fperms 0755 ${x/${D}}
+		fi
+	done
+
+	# Fix permissions on modules ...
+	for x in $(find ${D}/usr/$(get_libdir)/modules -name '*.o' -o -name '*.so'); do
+		if [ -f ${x} ]; then
+			fperms 0755 ${x/${D}}
+		fi
+	done
+
+	# Fix perms
+	if ! use minimal; then
+		fperms 755 /usr/$(get_libdir)/X11/xkb/geometry/sgi /usr/bin/dga
+	fi
+}
+
+zap_host_def_cflags() {
+	ebegin "Fixing $(get_libdir)/X11/config/host.def"
+		cp ${D}/usr/$(get_libdir)/X11/config/host.def ${T}
+		awk '!/OptimizedCDebugFlags|OptimizedCplusplusDebugFlags|GccWarningOptions/ {print $0}' \
+			${T}/host.def > ${D}/usr/$(get_libdir)/X11/config/host.def \
+			|| eerror "Munging host.def failed"
+		# theoretically, /usr/lib/X11/config is a possible candidate for
+		# config file management. If we find that people really worry about imake
+		# stuff, we may add it.  But for now, we leave the dir unprotected.
+	eend 0
+}
+
+add_euro_support() {
+	ebegin "Adding Euro support"
+		LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/$(get_libdir)" \
+		${D}/usr/bin/bdftopcf -t ${WORKDIR}/Xlat9-8x14.bdf | \
+			gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-8x14-lat9.pcf.gz
+		LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/$(get_libdir)" \
+		${D}/usr/bin/bdftopcf -t ${WORKDIR}/Xlat9-9x16.bdf | \
+			gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-9x16-lat9.pcf.gz
+		LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/$(get_libdir)" \
+		${D}/usr/bin/bdftopcf -t ${WORKDIR}/Xlat9-10x20.bdf | \
+			gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-10x20-lat9.pcf.gz
+	eend 0
+}
+
+setup_standard_symlinks() {
+	# Standard symlinks
+	dodir /usr/{bin,include,$(get_libdir)}
+	dosym ../bin /usr/bin/X11
+	# Stop complains about "file or directory not existing"
+	dodir /usr/X11R6
+	dosym ../include /usr/X11R6/include
+	dosym ../../usr/$(get_libdir)/X11/xkb /etc/X11/xkb
+
+	# Some critical directories
+	if ! use minimal; then
+		keepdir /var/lib/xdm
+		dosym ../../../var/lib/xdm /etc/X11/xdm/authdir
+	fi
+
+	# Backwards compat, FHS, etc.
+	dosym ../../usr/X11R6/bin/Xorg /etc/X11/X
+}
+
+libtool_archive_install() {
+	if use opengl; then
+		# .la files for libtool support
+		insinto /usr/$(get_libdir)
+		# (#67729) Needs to be lib, not $(get_libdir)
+		doins ${FILES_DIR}/lib/*.la
+	fi
+}
+
+fix_libtool_libdir_paths() {
+	local dirpath
+	for archive in ${*} ; do
+		dirpath=$(dirname ${archive} | sed -e "s:^${D}::")
+		[[ ${dirpath::1} == "/" ]] || dirpath="/"${dirpath}
+		sed -i ${archive} -e "s:^libdir.*:libdir=\'${dirpath}\':"
+	done
+}
+
+compose_files_install() {
+	# Hack from Mandrake (update ours that just created Compose files for
+	# all locales)
+	local x
+	for x in $(find ${D}/usr/$(get_libdir)/X11/locale/ -mindepth 1 -type d); do
+		# make empty Compose files for some locales
+		# CJK must not have that file (otherwise XIM don't works some times)
+		case $(basename ${x}) in
+			C|microsoft-*|iso8859-*|koi8-*)
+				if [ ! -f ${x}/Compose ]; then
+					touch ${x}/Compose
+				fi
+				;;
+			ja*|ko*|zh*)
+				if [ -r ${x}/Compose ]; then
+					rm -f ${x}/Compose
+				fi
+				;;
+		esac
+	done
+
+	# Another hack from Mandrake -- to fix dead + space for the us
+	# international keyboard
+	local i
+	for i in ${D}/usr/$(get_libdir)/X11/locale/*/Compose; do
+		sed -i \
+			-e 's/\(<dead_diaeresis> <space>\).*$/\1 : "\\"" quotedbl/' \
+			-e "s/\(<dead_acute> <space>\).*$/\1 : \"'\" apostrophe/" ${i} \
+			|| eerror "sed ${i} failed"
+	done
+}
+
+encode_xfsft_files() {
+	# Yet more Mandrake
+	ebegin "Encoding files for xfsft font server"
+		dodir /usr/share/fonts/encodings
+		cp -a ${WORKDIR}/usr/share/fonts/encodings/* \
+			${D}/usr/share/fonts/encodings
+
+		for x in ${D}/usr/share/fonts/encodings/{.,large}/*.enc; do
+			if [ -f "${x}" ]; then
+				gzip -9 -f ${x} \
+					|| eerror "gzipping ${x} failed"
+			fi
+		done
+	eend 0
+}
+
+koi8_fonts_install() {
+	ebegin "Adding gemini-koi8 fonts"
+		cd ${WORKDIR}/ukr
+		gunzip *.Z || eerror "gunzipping gemini-koi8 fonts failed"
+		gzip -9 *.pcf || eerror "gzipping gemini-koi8 fonts failed"
+		cd ${S}
+		cp -a ${WORKDIR}/ukr ${D}/usr/share/fonts \
+			|| eerror "copying gemini-koi8 fonts failed"
+	eend 0
+}
+
+etc_files_install() {
+	insinto /etc/X11
+
+	# Install example config file
+	newins ${S}/programs/Xserver/hw/xfree86/xorg.conf xorg.conf.example
+
+	exeinto /etc/X11
+	# new session management script
+	doexe ${FILES_DIR}/chooser.sh
+	# new display manager script
+	doexe ${FILES_DIR}/startDM.sh
+	exeinto /etc/X11/Sessions
+	# doexe skips directories, so this should be safe
+	doexe ${FILES_DIR}/Sessions/*
+	insinto /etc/env.d
+	doins ${FILES_DIR}/10xorg
+	insinto /etc/X11/xinit
+	doins ${FILES_DIR}/xinitrc
+	if ! use minimal; then
+		exeinto /etc/X11/xdm
+		doexe ${FILES_DIR}/Xsession ${FILES_DIR}/Xsetup_0
+		exeinto /etc/init.d
+		newexe ${FILES_DIR}/xdm.start xdm
+	fi
+	if use font-server; then
+		insinto /etc/X11/fs
+		newins ${FILES_DIR}/xfs.config config
+	fi
+	if use pam; then
+		insinto /etc/pam.d
+		newins ${FILES_DIR}/xdm.pamd xdm
+		# Need to fix console permissions first
+		newins ${FILES_DIR}/xserver.pamd xserver
+	fi
+	if use font-server; then
+		newexe ${FILES_DIR}/xfs.start xfs
+		insinto /etc/conf.d
+		newins ${FILES_DIR}/xfs.conf.d xfs
+	fi
+}
+
+dynamic_libgl_install() {
+	# next section is to setup the dynamic libGL stuff
+	ebegin "Moving libGL and friends for dynamic switching"
+		dodir /usr/$(get_libdir)/opengl/${PN}/{lib,extensions,include}
+		local x=""
+		for x in ${D}/usr/$(get_libdir)/libGL.so* \
+			${D}/usr/$(get_libdir)/libGL.la \
+			${D}/usr/$(get_libdir)/libGL.a; do
+			if [ -f ${x} -o -L ${x} ]; then
+				# libGL.a cause problems with tuxracer, etc
+				mv -f ${x} ${D}/usr/$(get_libdir)/opengl/${PN}/lib
+			fi
+		done
+			for x in ${D}/usr/$(get_libdir)/modules/extensions/libglx*; do
+			if [ -f ${x} -o -L ${x} ]; then
+				mv -f ${x} ${D}/usr/$(get_libdir)/opengl/${PN}/extensions
+			fi
+		done
+		# glext.h added for #54984
+		for x in ${D}/usr/include/GL/{gl.h,glx.h,glxtokens.h,glext.h,glxext.h,glxmd.h,glxproto.h}; do
+			if [ -f ${x} -o -L ${x} ]; then
+				mv -f ${x} ${D}/usr/$(get_libdir)/opengl/${PN}/include
+			fi
+		done
+	eend 0
+}
+
+cursor_install() {
+	# Make the core cursor the default.  People seem not to like whiteglass
+	# for some reason.
+	dosed 's:whiteglass:core:' /usr/share/cursors/${PN}/default/index.theme
+
+	if ! use minimal; then
+		install_extra_cursors
+	fi
+}
+
+strip_execs() {
+	if use debug || has nostrip ${FEATURES}; then
+		ewarn "Debug build turned on by USE=debug"
+		ewarn "NOT stripping binaries and libraries"
+	else
+		local STRIP
+		if [ ! -z "${CBUILD}" ] && [ "${CBUILD}" != "${CHOST}" ]; then
+			STRIP=${CHOST}-strip
+		else
+			STRIP=strip
+		fi
+		einfo "Stripping binaries and libraries..."
+		# This bit I got from Redhat ... strip binaries and drivers ..
+		# NOTE:  We do NOT want to strip the drivers, modules or DRI modules!
+		local x
+		for x in $(find ${D}/ -type f -perm +0111 -exec file {} \; | \
+		           grep -v ' shared object,' | \
+		           sed -n -e 's/^\(.*\):[  ]*ELF.*, not stripped/\1/p'); do
+			if [ -f ${x} ]; then
+				# Dont do the modules ...
+				if [ "${x/\/usr\/$(get_libdir)\/modules}" = "${x}" ]; then
+					echo "$(echo ${x/${D}})"
+					${STRIP} ${x} || :
+				fi
+			fi
+		done
+		# Now do the libraries ...
+		for x in ${D}/usr/{$(get_libdir),$(get_libdir)/opengl/${PN}/lib}/*.so.* \
+			$(get_libdir)/X11/locale/$(get_libdir)/common}/*.so.*; do
+			if [ -f ${x} ]; then
+				echo "$(echo ${x/${D}})"
+				${STRIP} --strip-debug ${x} || :
+			fi
+		done
+	fi
+}
+
+install_extra_cursors() {
+	# Install TaD's gentoo cursors
+	insinto /usr/share/cursors/${PN}/gentoo/cursors
+	doins ${WORKDIR}/cursors/gentoo/cursors/*
+	insinto /usr/share/cursors/${PN}/gentoo-blue/cursors
+	doins ${WORKDIR}/cursors/gentoo-blue/cursors/*
+	insinto /usr/share/cursors/${PN}/gentoo-silver/cursors
+	doins ${WORKDIR}/cursors/gentoo-silver/cursors/*
+}
+
+minimal_install() {
+		# Get rid of all unnecessary fonts (saves ~5.5 MB)
+		find ${D}/usr/share/fonts/misc/ -name '*.pcf.gz' \
+			-not -name '*6x13*' -not -name 'cursor.pcf.gz' -exec rm {} \;
+		# Woohoo, another 772K
+		rm -rf ${D}/usr/share/doc
+}
+
+xprint_install() {
+	# If we want xprint, save the init script before deleting /etc/rc.d/
+	# Requested on #68316
+	if use xprint; then
+		xprint_init_install
+	else
+		# delete xprint stuff
+		rm -f ${D}/etc/{init,profile}.d/xprint*
+		rmdir --ignore-fail-on-non-empty ${D}/etc/{init,profile}.d
+	fi
+
+	# Remove the /etc/rc.d nonsense -- not everyone is RedHat
+	rm -rf ${D}/etc/rc.d
+}
+
+xprint_init_install() {
+	# RH-style init script, we provide a wrapper
+	exeinto /usr/$(get_libdir)/misc
+	doexe ${D}/etc/init.d/xprint
+	rm -f ${D}/etc/init.d/xprint
+	# Install the wrapper
+	newinitd ${FILES_DIR}/xprint.init xprint
+	# patch profile scripts
+	sed -i -e "s:/bin/sh.*get_xpserverlist:/usr/$(get_libdir)/misc/xprint get_xpserverlist:g" ${D}/etc/profile.d/xprint*
+}
+
+config_files_install() {
+
+	# Fix default config files after installing fonts to /usr/share/fonts
+	sed -i -e "s:/usr/X11R6/$(get_libdir)/X11/fonts:/usr/share/fonts:g" \
+		-e "s:/usr/$(get_libdir)/X11/fonts:/usr/share/fonts:g" \
+		-e "s:/usr/$(get_libdir)/fonts:/usr/share/fonts:g" \
+		${D}/etc/X11/xorg.conf.example
+	if use font-server; then
+		sed -i "s:/usr/X11R6/$(get_libdir)/X11/fonts:/usr/share/fonts:g" \
+			${D}/etc/X11/fs/config
+	fi
+
+	# Work around upgrade problem where people have
+	# Option "XkbRules" "xfree86" in their config file
+	sed -i "s:^.*Option.*"XkbRules".*$::g" ${D}/etc/X11/xorg.conf.example
+}
+
+fix_opengl_symlinks() {
+	# Remove invalid symlinks
+	local LINK
+	for LINK in $(find ${D}/usr/$(get_libdir) \
+		-name libGL.* -type l); do
+		rm -f ${LINK}
+	done
+	# Create required symlinks
+	dosym libGL.so.1.2 /usr/$(get_libdir)/libGL.so
+	dosym libGL.so.1.2 /usr/$(get_libdir)/libGL.so.1
+}
+
+#################
+# pkg_preinst() #
+#################
+
+# We need a symlink /usr/X11R6/dir -> /usr/dir so all the packages
+# whose files we move don't lose track of them. As such, we need
+# _absolutely nothing_ in /usr/X11R6/dir so we can make such a symlink.
+# Donnie Berkholz <spyderous@gentoo.org> 20 October 2004
+#
+# Takes two arguments -- starting location and ending location
+migrate() {
+	einfo "Migrating from ${1} to ${2}..."
+
+	# Strip trailing slash
+	if [ -z "${1##*/}" ]; then
+		set -- ${1%/} ${2}
+	fi
+
+	if [ -e ${ROOT}${1} ]; then
+		# If it's not a symlink (in other words, it should be a directory)
+		if [ ! -L ${ROOT}${1} ]; then
+			einfo "  ${1} isn't a symlink, migrating..."
+			# Move everything
+				rsync \
+					--archive \
+					--update \
+					--links \
+					--hard-links \
+					--ignore-existing \
+					--stats \
+					--progress \
+					--verbose \
+					${ROOT}${1}/ ${ROOT}${2} > ${T}/migrate-${1//\//-}.log 2>&1
+
+				check_migrate_return
+				remove_migrated_files ${1}
+
+			if [ -e "${ROOT}${1}" ]; then
+				# Remove any floating .keep files so we can run rmdir
+				find ${ROOT}${1} -name '\.keep' -exec rm -f {} \;
+				# Get rid of the directory
+				rmdir ${ROOT}${1}
+			fi
+
+			make_symlinks ${1}
+		else
+			ewarn "    ${1} is a symlink, not migrating"
+		fi
+	else
+		ewarn "  ${1} doesn't exist, not migrating"
+		make_symlinks ${1}
+	fi
+}
+
+check_migrate_return() {
+	MIGRATE_RETURN="$?"
+	if [ "${MIGRATE_RETURN}" -eq "0" ]; then
+		einfo "rsync successful!"
+	else
+		die "rsync failed. Exit code: ${MIGRATE_RETURN}."
+	fi
+
+	# Migration fubars lib symlinks -- eradicator
+	if use amd64; then
+		if [[ -L ${ROOT}usr/lib64 ]]; then
+			rm ${ROOT}usr/lib64
+			ln -s lib ${ROOT}usr/lib64
+		elif [[ -L ${ROOT}usr/lib ]]; then
+			rm -f ${ROOT}usr/lib
+			ln -s lib64 ${ROOT}usr/lib
+		elif [[ -L ${ROOT}usr/lib32 ]]; then
+			if has_multilib_profile; then
+			ln -s lib ${ROOT}usr/lib32
+			else
+				ln -s ../emul/linux/x86/usr/lib ${ROOT}usr/lib32
+			fi
+		fi
+	fi
+}
+
+remove_migrated_files() {
+	# This is a copy instead of a move, so we need to get rid of what
+	# we copied. This is a little risky if it fails, so just do it on
+	# success.
+
+	# DO NOT proceed if we don't have an argument, or we kill root filesystem
+	if [ -z "${1}" ]; then
+		die "No argument to remove_migrated_files(). Want to `rm -rf ${ROOT}`?"
+	fi
+
+	if [ "${MIGRATE_RETURN}" -eq "0" ]; then
+#		rm -rfv ${ROOT}${1} > ${T}/migrate-remove-${1//\//-}.log 2>&1
+		rm -rfv ${ROOT}${1}
+	fi
+}
+
+make_symlinks() {
+			# Put a symlink in its place
+
+			# Special case: lib != libdir
+			if [ "${1##*/}" = "$(get_libdir)" -a "$(get_libdir)" != "lib" ]; then
+				einfo "    Symlinking ${ROOT}usr/X11R6/lib -> $(get_libdir)"
+				ln -s $(get_libdir) ${ROOT}usr/X11R6/lib
+			# Special case: fonts
+			elif [ "${1##*/}" = "fonts" ]; then
+				einfo "    Symlinking ${ROOT}${1} -> ../../share/fonts"
+				ln -s ../../share/fonts ${ROOT}${1}
+			# Special case: X11R6
+			elif [ "${1##*/}" = "X11R6" ]; then
+				einfo "    Symlinking ${ROOT}${1} -> ../usr"
+				ln -s ../usr ${ROOT}${1}
+			else
+				einfo "    Symlinking ${ROOT}${1} -> ../${1##*/}"
+				ln -s ../${1##*/} ${ROOT}${1}
+			fi
+}
+
+update_config_files() {
+	# Fix any installed config files for installing fonts to /usr/share/fonts
+	# This *needs* to be after all other installation so files aren't
+	# overwritten.
+
+	if [ "${ROOT}" = "/" ]; then
+		einfo "Preparing any installed configuration files for font move..."
+		FILES="/etc/X11/xorg.conf
+			/etc/X11/XF86Config-4
+			/etc/X11/XF86Config"
+		if use font-server; then
+			FILES="${FILES} /etc/X11/fs/config"
+		fi
+		#	/etc/fonts/fonts.conf
+		#	/etc/fonts/local.conf
+
+		local FILE
+		for FILE in ${FILES}; do
+			if [ -e ${FILE} ]; then
+				# New font paths
+				sed "s,/usr/X11R6/$(get_libdir)/X11/fonts,/usr/share/fonts,g" \
+					${ROOT}${FILE} > ${IMAGE}${FILE}
+
+				if [ "${FILE}" = "/etc/X11/xorg.conf" ] \
+					|| [ "${FILE}" = "/etc/X11/XF86Config" ] \
+					|| [ "${FILE}" = "/etc/X11/XF86Config-4" ]; then
+					# "keyboard" driver is deprecated and will be removed,
+					# switch to "kbd"
+					sed -i 's~^\([ \t]*Driver[ \t]\+\)"[kK]eyboard"~\1"kbd"~' \
+						${IMAGE}${FILE}
+
+					# This moved in the /usr/X11R6/libdir -> /usr/libdir change
+					sed -i \
+						-e 's~^\([ \t]*RgbPath[ \t]\+\)"/usr/X11R6/$(get_libdir)/X11/rgb"~\1"/usr/$(get_libdir)/X11/rgb"~' \
+						-e 's~^\([ \t]*RgbPath[ \t]\+\)"/usr/X11R6/lib/X11/rgb"~\1"/usr/lib/X11/rgb"~' \
+						${IMAGE}${FILE}
+
+					# Work around upgrade problem where people have
+					# Option "XkbRules" "xfree86" in their config file
+					sed -i "s:^.*Option.*\"XkbRules\".*$::g" \
+						${IMAGE}${FILE}
+				fi
+			fi
+		done
+	fi
+}
+
+cleanup_fonts() {
+	local G_FONTDIRS
+	G_FONTDIRS="Speedo encodings local misc util"
+	if use truetype-fonts; then
+		G_FONTDIRS="${G_FONTDIRS} TTF"
+	fi
+	if use type1-fonts; then
+		G_FONTDIRS="${G_FONTDIRS} Type1"
+	fi
+	if use cjk; then
+		G_FONTDIRS="${G_FONTDIRS} CID"
+	fi
+	if use bitmap-fonts; then
+		G_FONTDIRS="${G_FONTDIRS} 75dpi 100dpi"
+	fi
+	if use nls; then
+		G_FONTDIRS="${G_FONTDIRS} cyrillic ukr"
+	fi
+
+	for G_FONTDIR in ${G_FONTDIRS}; do
+		# clean out old fonts.* and encodings.dir files, as we
+		# will regenerate them
+		# Not Speedo or CID, as their fonts.scale files are "real"
+		if [ "${G_FONTDIR}" != "CID" -a "${G_FONTDIR}" != "Speedo" ]; then
+			find ${ROOT}/usr/share/fonts/${G_FONTDIR} -type f -name 'fonts.*' \
+				-o -name 'encodings.dir' -exec rm -fv {} \;
+		fi
+	done
+
+	# Get rid of deprecated directories so our symlinks in the same location
+	# work -- users shouldn't be placing fonts here so that should be fine,
+	# they should be using ~/.fonts or /usr/share/fonts. <spyderous>
+	remove_font_dirs
+}
+
+remove_font_dirs() {
+	if [ -e ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts ]; then
+		if [ ! -L ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts ]; then
+			local G_FONTDIR
+			for G_FONTDIR in ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/*; do
+				if [ -L "${G_FONTDIR}" ]; then
+					einfo "Removing ${G_FONTDIR} symlink."
+					rm -rfv ${G_FONTDIR}
+				else
+					ewarn "${G_FONTDIR} not a symlink, moving to /usr/share/fonts"
+					if [ -d ${G_FONTDIR} ]; then
+						if [ ! -e /usr/share/fonts/${G_FONTDIR##*/} ]; then
+							einfo "Moving ${G_FONTDIR} to /usr/share/fonts/."
+							mv ${G_FONTDIR} /usr/share/fonts/
+						else
+							ewarn "/usr/share/fonts/${G_FONTDIR##*/} exists. Remove it and try again."
+						fi
+					else
+						ewarn "${G_FONTDIR} does not exist."
+					fi
+				fi
+			done
+		fi
+	else
+		ewarn "${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts does not exist."
+	fi
+}
+
+move_app_defaults_to_etc() {
+	if [ -L ${ROOT}/etc/X11/app-defaults ]; then
+		rm -f ${ROOT}/etc/X11/app-defaults
+	fi
+
+	if [ ! -L ${ROOT}/usr/$(get_libdir)/app-defaults ] \
+		&& [ -d ${ROOT}/usr/$(get_libdir)/app-defaults ]; then
+		if [ ! -d ${ROOT}/etc/X11/app-defaults ]; then
+			mkdir -p ${ROOT}/etc/X11/app-defaults
+		fi
+
+		mv -f ${ROOT}/usr/$(get_libdir)/app-defaults ${ROOT}/etc/X11
+	fi
+}
+
+move_xkb_to_usr() {
+	if [ -L ${ROOT}/usr/$(get_libdir)/xkb ]; then
+		rm -f ${ROOT}/usr/$(get_libdir)/xkb
+	fi
+
+	if [ ! -L ${ROOT}/etc/X11/xkb ] \
+		&& [ -d ${ROOT}/etc/X11/xkb ]; then
+		if [ ! -d ${ROOT}/usr/$(get_libdir)/xkb ]; then
+			mkdir -p ${ROOT}/usr/$(get_libdir)
+		fi
+
+	    mv -f ${ROOT}/etc/X11/xkb ${ROOT}/usr/$(get_libdir)
+	fi
+}
+
+dynamic_libgl_preinst() {
+	# clean the dynamic libGL stuff's home to ensure
+	# we don't have stale libs floating around
+	if [ -d ${ROOT}/usr/$(get_libdir)/opengl/${PN} ]; then
+		rm -rf ${ROOT}/usr/$(get_libdir)/opengl/${PN}/*
+	fi
+
+	# make sure we do not have any stale files lying around
+	# that could break things. Check old and new locations.
+	rm -f ${ROOT}/usr/X11R6/$(get_libdir)/libGL\.* \
+		${ROOT}/usr/$(get_libdir)/libGL\.*
+}
+
+##################
+# pkg_postinst() #
+##################
+
+font_setup() {
+	umask 022
+
+	# These cause ttmkfdir to segfault :/
+	rm -f ${ROOT}/usr/share/fonts/encodings/iso8859-6.8x.enc.gz
+	rm -f ${ROOT}/usr/share/fonts/encodings/iso8859-6.16.enc.gz
+#	rm -f ${ROOT}/usr/share/fonts/encodings/large/cns11643-1.enc
+#	rm -f ${ROOT}/usr/share/fonts/encodings/large/cns11643-2.enc
+#	rm -f ${ROOT}/usr/share/fonts/encodings/large/cns11643-3.enc
+#	rm -f ${ROOT}/usr/share/fonts/encodings/suneu-greek.enc
+
+	# ********************************************************************
+	#  A note about fonts and needed files:
+	#
+	#  1)  Create /usr/share/fonts/encodings/encodings.dir
+	#
+	#  2)  Create fonts.scale for TrueType fonts (need to do this before
+	#      we create fonts.dir files, else fonts.dir files will be
+	#      invalid for TrueType fonts...)
+	#
+	#  3)  Now Generate fonts.dir files.
+	#
+	#  CID fonts is a bit more involved, but as we do not install any,
+	#  thus I am not going to bother.
+	#
+	#  <azarah@gentoo.org> (20 Oct 2002)
+	#
+	# ********************************************************************
+
+	ebegin "Generating encodings.dir"
+		# Create the encodings.dir in /usr/share/fonts/encodings
+		LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir)" \
+		${ROOT}/usr/bin/mkfontdir -n \
+			-e ${ROOT}/usr/share/fonts/encodings \
+			-e ${ROOT}/usr/share/fonts/encodings/large \
+			-- ${ROOT}/usr/share/fonts/encodings
+
+	eend 0
+
+	if [ -x ${ROOT}/usr/bin/ttmkfdir ]; then
+		ebegin "Creating fonts.scale files"
+			local x
+			for x in $(find ${ROOT}/usr/share/fonts/* -maxdepth 1 -type d); do
+				[ -z "$(ls ${x}/)" ] && continue
+				[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
+
+				# Only generate .scale files if truetype, opentype or type1
+				# fonts are present ...
+
+				# First truetype (ttf,ttc)
+				# NOTE: ttmkfdir does NOT work on type1 fonts (#53753)
+				# Also, there is no way to regenerate Speedo/CID fonts.scale
+				# <spyderous@gentoo.org> 2 August 2004
+				if [ "${x/encodings}" = "${x}" -a \
+				     -n "$(find ${x} -iname '*.tt[cf]' -print)" ]; then
+					LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir)" \
+					${ROOT}/usr/bin/ttmkfdir -x 2 \
+						-e ${ROOT}/usr/share/fonts/encodings/encodings.dir \
+						-o ${x}/fonts.scale -d ${x}
+					# ttmkfdir fails on some stuff, so try mkfontscale if it does
+					local ttmkfdir_return=$?
+					if [ ${ttmkfdir_return} -ne 1 ]; then
+						LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir)" \
+						${ROOT}/usr/bin/mkfontscale \
+							-a /usr/share/fonts/encodings/encodings.dir \
+							-- ${x}
+					fi
+				# Next type1 and opentype (pfa,pfb,otf,otc)
+				elif [ "${x/encodings}" = "${x}" -a \
+					-n "$(find ${x} -iname '*.[po][ft][abcf]' -print)" ]; then
+					LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir)" \
+					${ROOT}/usr/bin/mkfontscale \
+						-a ${ROOT}/usr/share/fonts/encodings/encodings.dir \
+						-- ${x}
+				fi
+			done
+		eend 0
+	else
+		eerror "ttmkfdir not found. Unable to prepare TrueType fonts for use."
+	fi
+
+	ebegin "Generating fonts.dir files"
+		for x in $(find ${ROOT}/usr/share/fonts/* -maxdepth 1 -type d); do
+			[ -z "$(ls ${x}/)" ] && continue
+			[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
+
+			if [ "${x/encodings}" = "${x}" ]; then
+				LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir)" \
+				${ROOT}/usr/bin/mkfontdir \
+					-e ${ROOT}/usr/share/fonts/encodings \
+					-e ${ROOT}/usr/share/fonts/encodings/large \
+					-- ${x}
+			fi
+		done
+	eend 0
+
+	ebegin "Generating Xft cache"
+		for x in $(find ${ROOT}/usr/share/fonts/* -maxdepth 1 -type d); do
+			[ -z "$(ls ${x}/)" ] && continue
+			[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
+
+			# Only generate XftCache files if there are truetype
+			# fonts present ...
+			if [ "${x/encodings}" = "${x}" -a \
+			     -n "$(find ${x} -iname '*.[otps][pft][cfad]' -print)" ]; then
+				LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir)" \
+				${ROOT}/usr/bin/xftcache ${x} &> /dev/null
+			fi
+		done
+	eend 0
+
+	ebegin "Fixing permissions"
+		find ${ROOT}/usr/share/fonts/ -type f -name 'font.*' \
+			-exec chmod 0644 {} \;
+	eend 0
+
+	# danarmak found out that fc-cache should be run AFTER all the above
+	# stuff, as otherwise the cache is invalid, and has to be run again
+	# as root anyway
+	if [ -x ${ROOT}/usr/bin/fc-cache ]; then
+		ebegin "Creating FC font cache"
+			HOME="/root" ${ROOT}/usr/bin/fc-cache
+		eend 0
+	fi
+}
+
+switch_opengl_implem() {
+		# Switch to the xorg implementation.
+		# Use new opengl-update that will not reset user selected
+		# OpenGL interface ...
+		echo
+		local opengl_implem="$(${ROOT}/usr/sbin/opengl-update --get-implementation)"
+		${ROOT}/usr/sbin/opengl-update --use-old ${PN}
+}
+
+remove_old_compose_files() {
+	for x in $(find ${ROOT}/usr/$(get_libdir)/X11/locale/ -mindepth 1 -type d); do
+		# Remove old compose files we might have created incorrectly
+		# CJK must not have that file (otherwise XIM don't works some times)
+		case $(basename ${x}) in
+			ja*|ko*|zh*)
+				if [ -r "${x}/Compose" ]; then
+					rm -f ${x}/Compose
+				fi
+				;;
+		esac
+	done
+}
+
+setup_tmp_files() {
+	# These need to be owned by root and the correct permissions
+	# (bug #8281)
+	local x=""
+	for x in ${ROOT}/tmp/.{ICE,X11}-unix; do
+		if [ ! -d ${x} ]; then
+			mkdir -p ${x}
+		fi
+
+		chown root:wheel ${x}
+		chmod 1777 ${x}
+	done
+}
+
+print_info() {
+	echo
+	einfo "Please note that the xcursors are in /usr/share/cursors/${PN}."
+	einfo "Any custom cursor sets should be placed in that directory."
+	echo
+	einfo "If you wish to set system-wide default cursors, please create"
+	einfo "/usr/local/share/cursors/${PN}/default/index.theme"
+	einfo "with content: \"Inherits=theme_name\" so that future"
+	einfo "emerges will not overwrite those settings."
+	echo
+	einfo "Listening on TCP is disabled by default with startx."
+	einfo "To enable it, edit /usr/bin/startx."
+	echo
+
+	einfo "If you have a Radeon, set this option for direct rendering:"
+	einfo "Option \"ColorTiling\" \"false\""
+	einfo "The Mesa in these developmental snapshots is out of date."
+	echo
+	einfo "Binary drivers may be broken in >=6.8.99.8."
+	einfo "See https://bugs.freedesktop.org/show_bug.cgi?id=3066."
+
+	# (#76985)
+	einfo "Visit http://www.gentoo.org/doc/en/index.xml?catid=desktop"
+	einfo "for more information on configuring X."
+
+	# Try to get people to read this, pending #11359
+	ebeep 5
+	epause 10
+}
+
+fix_links() {
+	# Fix problematic links
+	if [ -x ${ROOT}/usr/bin/Xorg ]; then
+		ln -snf ../bin ${ROOT}/usr/bin/X11
+	fi
+}