Empty dev overlay, as I'm retiring from Gentoo.HEADmaster

apps can now be found at http://projects.longitekk.com:8000/Projects/browser/gentoo-ebuilds
vda can now be found at http://vda.sourceforge.net/ and http://vda-ng.longitekk.com:8000/VDA-NG/browser (out-of-date)
syscp can now be found up-to-date directly from upstream: http://wiki.syscp.org/docs/syscp-howto-gentoo-en
coda and versioncp are out-of-date, broken trial runs of some stuff, so they just get deleted

svn path=/; revision=104

1 files changed, 0 insertions, 376 deletions

diff --git a/syscp/patches/gentoo-config-files/bind-ssl/gentoo/courier/etc_courier-imap_imapd b/syscp/patches/gentoo-config-files/bind-ssl/gentoo/courier/etc_courier-imap_imapd
deleted file mode 100644
index f594e41..0000000
--- a/syscp/patches/gentoo-config-files/bind-ssl/gentoo/courier/etc_courier-imap_imapd
+++ /dev/null
@@ -1,376 +0,0 @@
-##VERSION: $Id: imapd.dist.in,v 1.32 2004/11/25 04:57:04 mrsam Exp $
-#
-# imapd created from imapd.dist by sysconftool
-#
-# Do not alter lines that begin with ##, they are used when upgrading
-# this configuration.
-#
-#  Copyright 1998 - 2004 Double Precision, Inc.  See COPYING for
-#  distribution information.
-#
-#  This configuration file sets various options for the Courier-IMAP server
-#  when used with the couriertcpd server.
-#  A lot of the stuff here is documented in the manual page for couriertcpd.
-#
-#  NOTE - do not use \ to split long variable contents on multiple lines.
-#  This will break the default imapd.rc script, which parses this file.
-#
-##NAME: ADDRESS:0
-#
-#  Address to listen on, can be set to a single IP address.
-#
-# ADDRESS=127.0.0.1
-
-ADDRESS=0
-
-##NAME: PORT:1
-#
-#  Port numbers that connections are accepted on.  The default is 143,
-#  the standard IMAP port.
-#
-#  Multiple port numbers can be separated by commas.  When multiple port
-#  numbers are used it is possible to select a specific IP address for a
-#  given port as "ip.port".  For example, "127.0.0.1.900,192.68.0.1.900"
-#  accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1
-#  The previous ADDRESS setting is a default for ports that do not have
-#  a specified IP address.
-
-PORT=143
-
-##NAME: AUTHSERVICE:0
-#
-#  It's possible to authenticate using a different 'service' parameter
-#  depending on the connection's port.  This only works with authentication
-#  modules that use the 'service' parameter, such as PAM.  Example:
-#
-#  AUTHSERVICE143=imap
-#  AUTHSERVICE993=imaps
-
-##NAME: MAXDAEMONS:0
-#
-#  Maximum number of IMAP servers started
-#
-
-MAXDAEMONS=50
-
-##NAME: MAXPERIP:0
-#
-#  Maximum number of connections to accept from the same IP address
-
-MAXPERIP=10
-
-##NAME: PIDFILE:0
-#
-#  File where couriertcpd will save its process ID
-#
-
-PIDFILE=/var/run/imapd.pid
-
-##NAME: TCPDOPTS:0
-#
-# Miscellaneous couriertcpd options that shouldn't be changed.
-#
-
-TCPDOPTS="-nodnslookup -noidentlookup"
-
-##NAME: IMAP_CAPABILITY:1
-#
-# IMAP_CAPABILITY specifies what most of the response should be to the
-# CAPABILITY command.
-#
-# If you have properly configured Courier to use CRAM-MD5 or CRAM-SHA1
-# authentication (see INSTALL), set IMAP_CAPABILITY as follows:
-#
-# IMAP_CAPABILITY="IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA AUTH=CRAM-MD5 AUTH=CRAM-SHA1 IDLE"
-#
-
-IMAP_CAPABILITY="IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE"
-
-##NAME: KEYWORDS_CAPABILITY:0
-#
-# IMAP_KEYWORDS=1 enables custom IMAP keywords.  Set this option to 0 to
-# disable custom keywords.
-
-IMAP_KEYWORDS=1
-
-##NAME: SMAP1_CAPABILITY:0
-#
-# EXPERIMENTAL
-#
-# To enable the experimental "Simple Mail Access Protocol" extensions,
-# uncomment the following setting.
-#
-# SMAP_CAPABILITY=SMAP1
-
-##NAME: IMAP_CAPABILITY_ORIG:1
-#
-# For use by webadmin
-
-IMAP_CAPABILITY_ORIG="IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA AUTH=CRAM-MD5 AUTH=CRAM-SHA1 IDLE"
-
-##NAME: IMAP_PROXY:0
-#
-# Enable proxying.  See README.proxy
-
-IMAP_PROXY=0
-
-##NAME: IMAP_PROXY_FOREIGN:0
-#
-# Proxying to non-Courier servers.  Re-sends the CAPABILITY command after
-# logging in to the remote server.  May not work with all IMAP clients.
-
-IMAP_PROXY_FOREIGN=0
-
-##NAME: IMAP_IDLE_TIMEOUT:0
-#
-# This setting controls how often
-# the server polls for changes to the folder, in IDLE mode (in seconds).
-
-IMAP_IDLE_TIMEOUT=60
-
-##NAME: IMAP_CAPABILITY_TLS:0
-#
-# The following setting will advertise SASL PLAIN authentication after
-# STARTTLS is established.  If you want to allow SASL PLAIN authentication
-# with or without TLS then just comment this out, and add AUTH=PLAIN to
-# IMAP_CAPABILITY
-
-IMAP_CAPABILITY_TLS="$IMAP_CAPABILITY AUTH=PLAIN"
-
-##NAME: IMAP_TLS_ORIG:0
-#
-# For use by webadmin
-
-IMAP_CAPABILITY_TLS_ORIG="$IMAP_CAPABILITY_ORIG AUTH=PLAIN"
-
-##NAME: IMAP_DISABLETHREADSORT:0
-#
-# Set IMAP_DISABLETHREADSORT to disable the THREAD and SORT commands -
-# server side sorting and threading.
-#
-# Those capabilities will still be advertised, but the server will reject
-# them.  Set this option if you want to disable all the extra load from
-# server-side threading and sorting.  Not advertising those capabilities
-# will simply result in the clients reading the entire folder, and sorting
-# it on the client side.  That will still put some load on the server.
-# advertising these capabilities, but rejecting the commands, will stop this
-# silliness.
-#
-
-IMAP_DISABLETHREADSORT=0
-
-##NAME: IMAP_CHECK_ALL_FOLDERS:0
-#
-# Set IMAP_CHECK_ALL_FOLDERS to 1 if you want the server to check for new
-# mail in every folder.  Not all IMAP clients use the IMAP's new mail
-# indicator, but some do.  Normally new mail is checked only in INBOX,
-# because it is a comparatively time consuming operation, and it would be
-# a complete waste of time unless mail filters are used to deliver
-# mail directly to folders.
-#
-# When IMAP clients are used which support new mail indication, and when
-# mail filters are used to sort incoming mail into folders, setting
-# IMAP_CHECK_ALL_FOLDERS to 1 will allow IMAP clients to announce new
-# mail in folders.  Note that this will result in slightly more load on the
-# server.
-#
-
-IMAP_CHECK_ALL_FOLDERS=0
-
-##NAME: IMAP_OBSOLETE_CLIENT:0
-#
-# Set IMAP_OBSOLETE_CLIENT if your IMAP client expects \\NoInferiors to mean
-# what \\HasNoChildren really means.
-
-IMAP_OBSOLETE_CLIENT=0
-
-##NAME: IMAP_UMASK:0
-#
-# IMAP_UMASK sets the umask of the server process.  The value of IMAP_UMASK is
-# simply passed to the "umask" command.  The default value is 022.
-#
-# This feature is mostly useful for shared folders, where the file permissions
-# of the messages may be important.
-
-IMAP_UMASK=027
-
-##NAME: IMAP_ULIMITD:0
-#
-# IMAP_ULIMITD sets the maximum size of the data segment of the server
-# process.  The value of IMAP_ULIMITD is simply passed to the "ulimit -d"
-# command (or ulimit -v).  The argument to ulimi sets the upper limit on the
-# size of the data segment of the server process, in kilobytes.  The default
-# value of 65536 sets a very generous limit of 64 megabytes, which should
-# be more than plenty for anyone.
-#
-# This feature is used as an additional safety check that should stop
-# any potential denial-of-service attacks that exploit any kind of
-# a memory leak to exhaust all the available memory on the server.
-# It is theoretically possible that obscenely huge folders will also
-# result in the server running out of memory when doing server-side
-# sorting (by my calculations you have to have at least 100,000 messages
-# in a single folder, for that to happen).
-
-IMAP_ULIMITD=65536
-
-##NAME: IMAP_USELOCKS:0
-#
-# Setting IMAP_USELOCKS to 1 will use dot-locking to support concurrent
-# multiple access to the same folder.  This incurs slight additional
-# overhead.  Concurrent multiple access will still work without this setting,
-# however occasionally a minor race condition may result in an IMAP client
-# downloading the same message twice, or a keyword update will fail.
-#
-# IMAP_USELOCKS=1 is strongly recommended when shared folders are used.
-
-IMAP_USELOCKS=1
-
-##NAME: IMAP_SHAREDINDEXFILE:0
-#
-# The index of all accessible folders.  Do not change this setting unless
-# you know what you're doing.  See README.sharedfolders for additional
-# information.
-
-IMAP_SHAREDINDEXFILE=/etc/courier-imap/shared/index
-
-##NAME: IMAP_ENHANCEDIDLE:0
-#
-# If Courier was compiled with the File Alteration Monitor, setting
-# IMAP_ENHANCEDIDLE to 1 enables enhanced IDLE mode, where multiple
-# clients may open the same folder concurrently, and receive updates to
-# folder contents in realtime.  See the imapd(8) man page for additional
-# information.
-#
-# IMPORTANT: IMAP_USELOCKS *MUST* also be set to 1, and IDLE must be included
-# in the IMAP_CAPABILITY list.
-#
-
-IMAP_ENHANCEDIDLE=0
-
-##NAME: IMAP_TRASHFOLDERNAME:0
-#
-# The name of the magic trash Folder.  For MSOE compatibility,
-# you can set IMAP_TRASHFOLDERNAME="Deleted Items".
-#
-# IMPORTANT:  If you change this, you must also change IMAP_EMPTYTRASH
-
-IMAP_TRASHFOLDERNAME=Trash
-
-##NAME: IMAP_EMPTYTRASH:0
-#
-# The following setting is optional, and causes messages from the given
-# folder to be automatically deleted after the given number of days.
-# IMAP_EMPTYTRASH is a comma-separated list of folder:days.  The default
-# setting, below, purges 7 day old messages from the Trash folder.
-# Another useful setting would be:
-#
-# IMAP_EMPTYTRASH=Trash:7,Sent:30
-#
-# This would also delete messages from the Sent folder (presumably copies
-# of sent mail) after 30 days.  This is a global setting that is applied to
-# every mail account, and is probably useful in a controlled, corporate
-# environment.
-#
-# Important: the purging is controlled by CTIME, not MTIME (the file time
-# as shown by ls).  It is perfectly ordinary to see stuff in Trash that's
-# a year old.  That's the file modification time, MTIME, that's displayed.
-# This is generally when the message was originally delivered to this
-# mailbox.  Purging is controlled by a different timestamp, CTIME, which is
-# changed when the file is moved to the Trash folder (and at other times too).
-#
-# You might want to disable this setting in certain situations - it results
-# in a stat() of every file in each folder, at login and logout.
-#
-
-IMAP_EMPTYTRASH=Trash:7
-
-##NAME: IMAP_MOVE_EXPUNGE_TO_TRASH:0
-#
-# Set IMAP_MOVE_EXPUNGE_TO_TRASH to move expunged messages to Trash.  This
-# effectively allows an undo of message deletion by fishing the deleted
-# mail from trash.  Trash can be manually expunged as usually, and mail
-# will get automatically expunged from Trash according to IMAP_EMPTYTRASH.
-#
-# NOTE: shared folders are still expunged as usual.  Shared folders are
-# not affected.
-#
-
-IMAP_MOVE_EXPUNGE_TO_TRASH=0
-
-
-##NAME: OUTBOX:0
-#
-# The next set of options deal with the "Outbox" enhancement.
-# Uncomment the following setting to create a special folder, named
-# INBOX.Outbox
-#
-# OUTBOX=.Outbox
-
-##NAME: SENDMAIL:0
-#
-# If OUTBOX is defined, mail can be sent via the IMAP connection by copying
-# a message to the INBOX.Outbox folder.  For all practical matters,
-# INBOX.Outbox looks and behaves just like any other IMAP folder.  If this
-# folder doesn't exist it must be created by the IMAP mail client, just
-# like any other IMAP folder.  The kicker: any message copied or moved to
-# this folder is will be E-mailed by the Courier-IMAP server, by running
-# the SENDMAIL program.  Therefore, messages copied or moved to this
-# folder must be well-formed RFC-2822 messages, with the recipient list
-# specified in the To:, Cc:, and Bcc: headers.  Courier-IMAP relies on
-# SENDMAIL to read the recipient list from these headers (and delete the Bcc:
-# header) by running the command "$SENDMAIL -oi -t -f $SENDER", with the
-# message piped on standard input.  $SENDER will be the return address
-# of the message, which is set by the authentication module.
-#
-# DO NOT MODIFY SENDMAIL, below, unless you know what you're doing.
-#
-
-SENDMAIL=/usr/sbin/sendmail
-
-##NAME: HEADERFROM:0
-#
-# For administrative and oversight purposes, the return address, $SENDER
-# will also be saved in the X-IMAP-Sender mail header.  This header gets
-# added to the sent E-mail (but it doesn't get saved in the copy of the
-# message that's saved in the folder)
-#
-# WARNING - By enabling OUTBOX above, *every* IMAP mail client will receive
-# the magic OUTBOX treatment.  Therefore advance LARTing is in order for
-# _all_ of your lusers, until every one of them is aware of this.  Otherwise if
-# OUTBOX is left at its default setting - a folder name that might be used
-# accidentally - some people may be in for a rude surprise.  You can redefine
-# the name of the magic folder by changing OUTBOX, above.  You should do that
-# and pick a less-obvious name.  Perhaps brand it with your organizational
-# name ( OUTBOX=.WidgetsAndSonsOutbox )
-
-HEADERFROM=X-IMAP-Sender
-
-##NAME: IMAPDSTART:0
-#
-# IMAPDSTART is not used directly.  Rather, this is a convenient flag to
-# be read by your system startup script in /etc/rc.d, like this:
-#
-#  . /etc/courier-imap/imapd
-#
-#  case x$IMAPDSTART in
-#  x[yY]*)
-#        /usr/lib/courier-imap/imapd.rc start
-#        ;;
-#  esac
-#
-# The default setting is going to be NO, so you'll have to manually flip
-# it to yes.
-
-IMAPDSTART=YES
-
-##NAME: MAILDIRPATH:0
-#
-# MAILDIRPATH - directory name of the maildir directory.
-#
-MAILDIRPATH=Maildir
-
-#Hardwire a value for ${MAILDIR}
-MAILDIR=.maildir
-MAILDIRPATH=.maildir
-#Put any program for ${PRERUN} here
-PRERUN=