net-wireless/wpa_supplicant: call service stop on AP disconnect

Lot of discussion in the primary ticket for this, but apparently
multiple users report that previously connected wifi does not come up on
resume from suspend.  This is due to the original implementation
wpa_cli.sh not stopping the service, which was to avoid taking the
interface down, which would interfere with wpa_supplicant which needs
the interface to be up.  However, nowadays we set IN_BACKGROUND which
takes care of preventing the interface from being taken down, so it's
safe to stop the service.  If the service isn't stopped, then trying to
start the service on reconnection is a no-op (because the service is
already started).

Closes: https://bugs.gentoo.org/591752
Closes: https://bugs.gentoo.org/909574
Signed-off-by: Matoro Mahri <matoro_gentoo@matoro.tk>
Closes: https://github.com/gentoo/gentoo/pull/35579
Signed-off-by: Mike Gilbert <floppym@gentoo.org>

1 files changed, 477 insertions, 0 deletions

diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild
new file mode 100644
index 000000000000..2a500901cf60
--- /dev/null
+++ b/net-wireless/wpa_supplicant/wpa_supplicant-2.10-r5.ebuild
@@ -0,0 +1,477 @@
+# Copyright 1999-2024 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit desktop linux-info qmake-utils readme.gentoo-r1 systemd toolchain-funcs
+
+DESCRIPTION="IEEE 802.1X/WPA supplicant for secure wireless transfers"
+HOMEPAGE="https://w1.fi/wpa_supplicant/"
+LICENSE="|| ( GPL-2 BSD )"
+
+if [ "${PV}" = "9999" ]; then
+	inherit git-r3
+	EGIT_REPO_URI="https://w1.fi/hostap.git"
+else
+	KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~ia64 ~loong ~mips ~ppc ~ppc64 ~riscv ~sparc ~x86"
+	SRC_URI="https://w1.fi/releases/${P}.tar.gz"
+fi
+
+SLOT="0"
+IUSE="ap broadcom-sta dbus eap-sim eapol-test fasteap +fils +hs2-0 macsec +mbo +mesh p2p privsep ps3 qt5 readline selinux smartcard tdls tkip uncommon-eap-types wep wimax wps"
+
+# CONFIG_PRIVSEP=y does not have sufficient support for the new driver
+# interface functions used for MACsec, so this combination cannot be used
+# at least for now. bug #684442
+REQUIRED_USE="
+	macsec? ( !privsep )
+	privsep? ( !macsec )
+	broadcom-sta? ( !fils !mesh !mbo )
+"
+
+DEPEND="
+	>=dev-libs/openssl-1.0.2k:=
+	dbus? ( sys-apps/dbus )
+	kernel_linux? (
+		>=dev-libs/libnl-3.2:3
+		eap-sim? ( sys-apps/pcsc-lite )
+	)
+	!kernel_linux? ( net-libs/libpcap )
+	qt5? (
+		dev-qt/qtcore:5
+		dev-qt/qtgui:5
+		dev-qt/qtsvg:5
+		dev-qt/qtwidgets:5
+	)
+	readline? (
+		sys-libs/ncurses:0=
+		sys-libs/readline:0=
+	)
+"
+RDEPEND="${DEPEND}
+	selinux? ( sec-policy/selinux-networkmanager )
+	kernel_linux? (
+		net-wireless/wireless-regdb
+	)
+"
+BDEPEND="virtual/pkgconfig"
+
+DOC_CONTENTS="
+	If this is a clean installation of wpa_supplicant, you
+	have to create a configuration file named
+	${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf
+	An example configuration file is available for reference in
+	${EROOT}/usr/share/doc/${PF}/
+"
+
+S="${WORKDIR}/${P}/${PN}"
+
+Kconfig_style_config() {
+		#param 1 is CONFIG_* item
+		#param 2 is what to set it = to, defaulting in y
+		CONFIG_PARAM="${CONFIG_HEADER:-CONFIG_}$1"
+		setting="${2:-y}"
+
+		if [ ! $setting = n ]; then
+			#first remove any leading "# " if $2 is not n
+			sed -i "/^# *$CONFIG_PARAM=/s/^# *//" .config || echo "Kconfig_style_config error uncommenting $CONFIG_PARAM"
+			#set item = $setting (defaulting to y)
+			if ! sed -i "/^$CONFIG_PARAM\>/s/=.*/=$setting/" .config; then
+				echo "Kconfig_style_config error setting $CONFIG_PARAM=$setting"
+			fi
+			if [ -z "$( grep ^$CONFIG_PARAM= .config )" ] ; then
+				echo "$CONFIG_PARAM=$setting" >>.config
+			fi
+		else
+			#ensure item commented out
+			if ! sed -i "/^$CONFIG_PARAM\>/s/$CONFIG_PARAM/# $CONFIG_PARAM/" .config; then
+				echo "Kconfig_style_config error commenting $CONFIG_PARAM"
+			fi
+		fi
+}
+
+src_prepare() {
+	default
+
+	# net/bpf.h needed for net-libs/libpcap on Gentoo/FreeBSD
+	sed -i \
+		-e "s:\(#include <pcap\.h>\):#include <net/bpf.h>\n\1:" \
+		../src/l2_packet/l2_packet_freebsd.c || die
+
+	# Change configuration to match Gentoo locations (bug #143750)
+	sed -i \
+		-e "s:/usr/lib/opensc:/usr/$(get_libdir):" \
+		-e "s:/usr/lib/pkcs11:/usr/$(get_libdir):" \
+		wpa_supplicant.conf || die
+
+	# systemd entries to D-Bus service files (bug #372877)
+	echo 'SystemdService=wpa_supplicant.service' \
+		| tee -a dbus/*.service >/dev/null || die
+
+	cd "${WORKDIR}/${P}" || die
+
+	if use wimax; then
+		# generate-libeap-peer.patch comes before
+		# fix-undefined-reference-to-random_get_bytes.patch
+		eapply "${FILESDIR}/${P}-generate-libeap-peer.patch"
+
+		# multilib-strict fix (bug #373685)
+		sed -e "s/\/usr\/lib/\/usr\/$(get_libdir)/" -i src/eap_peer/Makefile || die
+	fi
+
+	# bug (320097)
+	eapply "${FILESDIR}/${PN}-2.6-do-not-call-dbus-functions-with-NULL-path.patch"
+
+	# bug (912315)
+	eapply "${FILESDIR}/${PN}-2.10-allow-legacy-renegotiation.patch"
+	eapply "${FILESDIR}/${P}-Drop-security-level-to-0-with-OpenSSL-3.0-wh.patch"
+
+	# bug (640492)
+	sed -i 's#-Werror ##' wpa_supplicant/Makefile || die
+}
+
+src_configure() {
+	# Toolchain setup
+	tc-export CC PKG_CONFIG
+
+	cp defconfig .config || die
+
+	# Basic setup
+	Kconfig_style_config CTRL_IFACE
+	Kconfig_style_config MATCH_IFACE
+	Kconfig_style_config BACKEND file
+	Kconfig_style_config IBSS_RSN
+	Kconfig_style_config IEEE80211W
+	Kconfig_style_config IEEE80211R
+	Kconfig_style_config HT_OVERRIDES
+	Kconfig_style_config VHT_OVERRIDES
+	Kconfig_style_config OCV
+	Kconfig_style_config TLSV11
+	Kconfig_style_config TLSV12
+	Kconfig_style_config GETRANDOM
+
+	# Basic authentication methods
+	# NOTE: we don't set GPSK or SAKE as they conflict
+	# with the below options
+	Kconfig_style_config EAP_GTC
+	Kconfig_style_config EAP_MD5
+	Kconfig_style_config EAP_OTP
+	Kconfig_style_config EAP_PAX
+	Kconfig_style_config EAP_PSK
+	Kconfig_style_config EAP_TLV
+	Kconfig_style_config EAP_EXE
+	Kconfig_style_config IEEE8021X_EAPOL
+	Kconfig_style_config PKCS12
+	Kconfig_style_config PEERKEY
+	Kconfig_style_config EAP_LEAP
+	Kconfig_style_config EAP_MSCHAPV2
+	Kconfig_style_config EAP_PEAP
+	Kconfig_style_config EAP_TEAP
+	Kconfig_style_config EAP_TLS
+	Kconfig_style_config EAP_TTLS
+
+	# Enabling background scanning.
+	Kconfig_style_config BGSCAN_SIMPLE
+	Kconfig_style_config BGSCAN_LEARN
+
+	if use dbus ; then
+		Kconfig_style_config CTRL_IFACE_DBUS
+		Kconfig_style_config CTRL_IFACE_DBUS_NEW
+		Kconfig_style_config CTRL_IFACE_DBUS_INTRO
+	else
+		Kconfig_style_config CTRL_IFACE_DBUS n
+		Kconfig_style_config CTRL_IFACE_DBUS_NEW n
+		Kconfig_style_config CTRL_IFACE_DBUS_INTRO n
+	fi
+
+	if use eapol-test ; then
+		Kconfig_style_config EAPOL_TEST
+	fi
+
+	# Enable support for writing debug info to a log file and syslog.
+	Kconfig_style_config DEBUG_FILE
+	Kconfig_style_config DEBUG_SYSLOG
+
+	if use hs2-0 ; then
+		Kconfig_style_config INTERWORKING
+		Kconfig_style_config HS20
+	fi
+
+	if use mbo ; then
+		Kconfig_style_config MBO
+	else
+		Kconfig_style_config MBO n
+	fi
+
+	if use uncommon-eap-types; then
+		Kconfig_style_config EAP_GPSK
+		Kconfig_style_config EAP_SAKE
+		Kconfig_style_config EAP_GPSK_SHA256
+		Kconfig_style_config EAP_IKEV2
+		Kconfig_style_config EAP_EKE
+	fi
+
+	if use eap-sim ; then
+		# Smart card authentication
+		Kconfig_style_config EAP_SIM
+		Kconfig_style_config EAP_AKA
+		Kconfig_style_config EAP_AKA_PRIME
+		Kconfig_style_config PCSC
+	fi
+
+	if use fasteap ; then
+		Kconfig_style_config EAP_FAST
+	fi
+
+	if use readline ; then
+		# readline/history support for wpa_cli
+		Kconfig_style_config READLINE
+	else
+		#internal line edit mode for wpa_cli
+		Kconfig_style_config WPA_CLI_EDIT
+	fi
+
+	Kconfig_style_config TLS openssl
+	Kconfig_style_config FST
+
+	Kconfig_style_config EAP_PWD
+	if use fils; then
+		Kconfig_style_config FILS
+		Kconfig_style_config FILS_SK_PFS
+	fi
+	if use mesh; then
+		Kconfig_style_config MESH
+	else
+		Kconfig_style_config MESH n
+	fi
+	# WPA3
+	Kconfig_style_config OWE
+	Kconfig_style_config SAE
+	Kconfig_style_config DPP
+	Kconfig_style_config DPP2
+	Kconfig_style_config SUITEB192
+	Kconfig_style_config SUITEB
+
+	if use wep ; then
+		Kconfig_style_config WEP
+	else
+		Kconfig_style_config WEP n
+	fi
+
+	# Watch out, reversed logic
+	if use tkip ; then
+		Kconfig_style_config NO_TKIP n
+	else
+		Kconfig_style_config NO_TKIP
+	fi
+
+	if use smartcard ; then
+		Kconfig_style_config SMARTCARD
+	else
+		Kconfig_style_config SMARTCARD n
+	fi
+
+	if use tdls ; then
+		Kconfig_style_config TDLS
+	fi
+
+	if use kernel_linux ; then
+		# Linux specific drivers
+		Kconfig_style_config DRIVER_ATMEL
+		Kconfig_style_config DRIVER_HOSTAP
+		Kconfig_style_config DRIVER_IPW
+		Kconfig_style_config DRIVER_NL80211
+		Kconfig_style_config DRIVER_RALINK
+		Kconfig_style_config DRIVER_WEXT
+		Kconfig_style_config DRIVER_WIRED
+
+		if use macsec ; then
+			#requires something, no idea what
+			#Kconfig_style_config DRIVER_MACSEC_QCA
+			Kconfig_style_config DRIVER_MACSEC_LINUX
+			Kconfig_style_config MACSEC
+		else
+			# bug #831369 and bug #684442
+			Kconfig_style_config DRIVER_MACSEC_LINUX n
+			Kconfig_style_config MACSEC n
+		fi
+
+		if use ps3 ; then
+			Kconfig_style_config DRIVER_PS3
+		fi
+	fi
+
+	# Wi-Fi Protected Setup (WPS)
+	if use wps ; then
+		Kconfig_style_config WPS
+		Kconfig_style_config WPS2
+		# USB Flash Drive
+		Kconfig_style_config WPS_UFD
+		# External Registrar
+		Kconfig_style_config WPS_ER
+		# Universal Plug'n'Play
+		Kconfig_style_config WPS_UPNP
+		# Near Field Communication
+		Kconfig_style_config WPS_NFC
+	else
+		Kconfig_style_config WPS n
+		Kconfig_style_config WPS2 n
+		Kconfig_style_config WPS_UFD n
+		Kconfig_style_config WPS_ER n
+		Kconfig_style_config WPS_UPNP n
+		Kconfig_style_config WPS_NFC n
+	fi
+
+	# Wi-Fi Direct (WiDi)
+	if use p2p ; then
+		Kconfig_style_config P2P
+		Kconfig_style_config WIFI_DISPLAY
+	else
+		Kconfig_style_config P2P n
+		Kconfig_style_config WIFI_DISPLAY n
+	fi
+
+	# Access Point Mode
+	if use ap ; then
+		Kconfig_style_config AP
+	else
+		Kconfig_style_config AP n
+	fi
+
+	# Enable essentials for AP/P2P
+	if use ap || use p2p ; then
+		# Enabling HT support (802.11n)
+		Kconfig_style_config IEEE80211N
+
+		# Enabling VHT support (802.11ac)
+		Kconfig_style_config IEEE80211AC
+	fi
+
+	# Enable mitigation against certain attacks against TKIP
+	Kconfig_style_config DELAYED_MIC_ERROR_REPORT
+
+	if use privsep ; then
+		Kconfig_style_config PRIVSEP
+	fi
+
+	if use kernel_linux ; then
+		Kconfig_style_config LIBNL32
+	fi
+
+	if use qt5 ; then
+		pushd "${S}"/wpa_gui-qt4 > /dev/null || die
+		eqmake5 wpa_gui.pro
+		popd > /dev/null || die
+	fi
+}
+
+src_compile() {
+	einfo "Building wpa_supplicant"
+	emake V=1 BINDIR=/usr/sbin
+
+	if use wimax; then
+		emake -C ../src/eap_peer clean
+		emake -C ../src/eap_peer
+	fi
+
+	if use qt5; then
+		einfo "Building wpa_gui"
+		emake -C "${S}"/wpa_gui-qt4
+	fi
+
+	if use eapol-test ; then
+		emake eapol_test
+	fi
+}
+
+src_install() {
+	dosbin wpa_supplicant
+	use privsep && dosbin wpa_priv
+	dobin wpa_cli wpa_passphrase
+
+	newinitd "${FILESDIR}/${PN}-init.d" wpa_supplicant
+	newconfd "${FILESDIR}/${PN}-conf.d" wpa_supplicant
+
+	exeinto /etc/wpa_supplicant/
+	newexe "${FILESDIR}/wpa_cli-r1.sh" wpa_cli.sh
+
+	readme.gentoo_create_doc
+	dodoc ChangeLog {eap_testing,todo}.txt README{,-WPS} \
+		wpa_supplicant.conf
+
+	newdoc .config build-config
+
+	if [ "${PV}" != "9999" ]; then
+		doman doc/docbook/*.{5,8}
+	fi
+
+	if use qt5 ; then
+		into /usr
+		dobin wpa_gui-qt4/wpa_gui
+		doicon wpa_gui-qt4/icons/wpa_gui.svg
+		domenu wpa_gui-qt4/wpa_gui.desktop
+	else
+		rm "${ED}"/usr/share/man/man8/wpa_gui.8
+	fi
+
+	use wimax && emake DESTDIR="${D}" -C ../src/eap_peer install
+
+	if use dbus ; then
+		pushd "${S}"/dbus > /dev/null || die
+		insinto /etc/dbus-1/system.d
+		newins dbus-wpa_supplicant.conf wpa_supplicant.conf
+		insinto /usr/share/dbus-1/system-services
+		doins fi.w1.wpa_supplicant1.service
+		popd > /dev/null || die
+
+		# This unit relies on dbus support, bug 538600.
+		systemd_dounit systemd/wpa_supplicant.service
+	fi
+
+	if use eapol-test ; then
+		dobin eapol_test
+	fi
+
+	systemd_dounit "systemd/wpa_supplicant@.service"
+	systemd_dounit "systemd/wpa_supplicant-nl80211@.service"
+	systemd_dounit "systemd/wpa_supplicant-wired@.service"
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+
+	if [[ -e "${EROOT}"/etc/wpa_supplicant.conf ]] ; then
+		echo
+		ewarn "WARNING: your old configuration file ${EROOT}/etc/wpa_supplicant.conf"
+		ewarn "needs to be moved to ${EROOT}/etc/wpa_supplicant/wpa_supplicant.conf"
+	fi
+	if ! use wep; then
+		einfo "WARNING: You are building with WEP support disabled, which is recommended since"
+		einfo "this protocol is deprecated and insecure.  If you still need to connect to"
+		einfo "WEP-enabled networks, you may turn this flag back on.  With this flag off,"
+		einfo "WEP-enabled networks will not even show up as available."
+		einfo "If your network is missing you may wish to USE=wep"
+	fi
+	if ! use tkip; then
+		ewarn "WARNING: You are building with TKIP support disabled, which is recommended since"
+		ewarn "this protocol is deprecated and insecure.  If you still need to connect to"
+		ewarn "TKIP-enabled networks, you may turn this flag back on.  With this flag off,"
+		ewarn "TKIP-enabled networks, including mixed mode TKIP/AES-CCMP will not even show up"
+		ewarn "as available.  If your network is missing you may wish to USE=tkip"
+	fi
+
+	# Mea culpa, feel free to remove that after some time --mgorny.
+	local fn
+	for fn in wpa_supplicant{,@wlan0}.service; do
+		if [[ -e "${EROOT}"/etc/systemd/system/network.target.wants/${fn} ]]
+		then
+			ebegin "Moving ${fn} to multi-user.target"
+			mv "${EROOT}"/etc/systemd/system/network.target.wants/${fn} \
+				"${EROOT}"/etc/systemd/system/multi-user.target.wants/ || die
+			eend ${?} \
+				"Please try to re-enable ${fn}"
+		fi
+	done
+
+	systemd_reenable wpa_supplicant.service
+}