Removing media-sound/emu10k1 - obselete, use ALSA instead.

10 files changed, 0 insertions, 446 deletions

diff --git a/media-sound/emu10k1/files/README.gentoo b/media-sound/emu10k1/files/README.gentoo
deleted file mode 100644
index 912c3d164a7e..000000000000
--- a/media-sound/emu10k1/files/README.gentoo
+++ /dev/null
@@ -1,103 +0,0 @@
-This excellent Linux Audigy FAQ is from
-http://basic-rip.co.uk/tenpin/linux_audigy_faq.html, which is currently
-unreadable so we're adding a cached copy from google to this file for
-safe-keeping. PLEASE NOTE: the current version of the Gentoo Linux emu10k1
-auto-detects emu10k1 or audigy and also uses a fixed audigy-script as described
-in this FAQ. However, the MIDI/LiveWire fix may still be needed for some users.
-
-<audigy-faq>
-
-This page details my experience in getting my Creative Soundblaster Audigy to
-work properly under Linux (Gentoo Linux to be exact) using the Open Sound
-System driver.
-
-If you use Gentoo Linux then grab this package which contains an eBuild I wrote
-to do all the below (last updated 11:53 11th Oct):
-emu10k1-audigy-20020927-rl.tar.gz
-
-The first thing to do is download the driver source archive from
-http://sourceforge.net/projects/emu10k1/.
-
-Extract the archive in a directory you have write access to (your home
-directory): tar xvjf emu10k1-v0.20a.tar.bz2
-
-Enter the extracted directory:  cd emu10k1-v0.20
-
-Next run:
-
-make
-make all
-
-Then run (as root):
-
-make install
-
-If the first make fails then you will need to edit the file config so that the
-line KERNEL_SOURCE := gives the location of your kernel source code.
-
-Ussually this location is: /usr/src/linux
-
-Next run (not as root):
-
-make tools
-
-Then run (as root):
-
-make install-tools
-
-The script audigy-script and the config file emu10k1.conf are both installed to
-/usr/local/etc/.
-
-I have written replacements for these files which fix lots of bugs with the
-default ones. I would advise you to read them and then replace the existing
-ones with my versions:
-
-audigy-script
-emu10k1.conf
-
-audigy-script is used to configure the soundcard so that all the channels are
-setup properly and so that recording works.  emu10k1.conf is used to set some
-options for audigy-script.
-
-audigy-script sets up the following volume controls:
-
-Vol - Front Speaker Volumes
-OGain - Rear Speaker Volumes
-Igain - Center/Subwoofer Volumes
-
-Update: 30.10.02
-
-If you find that you are only getting a particular sound source (eg. CD
-playback) through the 2 front channels, you can mirror them to the rear 2
-channels by adding the following line to audigy-script:
-
-$DSPMGR -a"Pcm:$REAR"
-
-Also thanks to Colin McCambridge for these 2 tips:
-
-1) Don't download and use the 0.9.4 tools package from sourceforge, as it
-appears to contain an old version of the emu-dspmgr program that does *not*
-seem to support stereo input/output routing (Both the included script and yours
-were broken when using that tool, because "Pcm" was not a valid input for the
-route).  The included tools in the driver package work just fine
-
-2) For people with Audigy Platinum cards that have the Audigy Drive and
-InfraRed remote, the fix that took me so long to find to enable the system MIDI
-messages triggered by the infrared remote (and thus enable the remote's
-functionality) is this:
-
-Before compiling the emu10k1 driver, you have to edit the midi.h file and
-uncomment the line #define USE_AUDIGY_DRIVE_MIDI.   The Audigy card has two
-MIDI devices, and since the emu10k1 developers have yet to get both working at
-the same time, uncommenting that line switches support from the first to the
-second on Audigy Platinum cards.
-
-If you find any problems with my scripts or any of my instructions then please
-mail me: tenpin22@blueyonder.co.uk
-
-There are some forums on the driver Sourceforge homepage but I haven't found
-them very active. You can find them here.
-
-I will be updating this page when I remember what else I was going to put on
-it.
-</audigy-faq>
diff --git a/media-sound/emu10k1/files/audigy-script b/media-sound/emu10k1/files/audigy-script
deleted file mode 100644
index 347412a5c080..000000000000
--- a/media-sound/emu10k1/files/audigy-script
+++ /dev/null
@@ -1,208 +0,0 @@
-#!/bin/bash -e
-#
-#     audigy-script  --  A setup script
-#
-#     Author:        Jonathan Boler (tenpin22@blueyonder.co.uk)  Originally: Daniel Bertrand
-#     Last Updates:  
-#                    Daniel Robbins, 07th March 2003 (drobbins@gentoo.org)
-#                      Set tone control defaults to 50/100 (neutral)
-#					 Jonathan Boler, 11th October 2002
-#     Version:       0.31
-#
-# Optional argument processing:
-# This script takes arguments which can override the settings in the
-# config file. The following flags are supported:
-#
-# -d [yes|no]	use the digital output
-# -t [yes|no]	enable the tone controls
-# -3 [yes|no]	enable ac3 passthrough
-# -i [yes|no]	enable livedrive ir
-
-# Default location of programs:
-BASE_PATH=/usr
-DSPPATH=$BASE_PATH/share/emu10k1
-AUMIX=`which aumix`
-
-# To use something other than /dev/dsp
-# example "-D /dev/dsp1"
-DSPDEV=""
-
-# To use something other than /dev/dsp
-# example "-M /dev/mixer1"
-MIXERDEV=""
-
-DSPMGR=$BASE_PATH/bin/emu-dspmgr $DSPDEV $MIXERDEV
-
-CONFIG=$BASE_PATH/bin/emu-config $DSPDEV $MIXERDEV
-
-SAVEARGS="$@"
-
-load(){
-
-# Source configurations
-  . /etc/emu10k1.conf
-
-# Pick up any command line overrides
-while getopts d:t:3:i: OPT $SAVEARGS; do
-	case "$OPT" in
-	d)
-		USE_DIGITAL_OUTPUT=$OPTARG
-		;;
-	t)
-		ENABLE_TONE_CONTROL=$OPTARG
-		;;
-	3)
-		AC3PASSTHROUGH=$OPTARG
-		;;
-	i)
-		ENABLE_LIVEDRIVE_IR=$OPTARG
-		;;
-	*)
-		exit 1
-		;;
-	esac
-	shift 2
-done
-
-# Set some variables
-if [ "$USE_DIGITAL_OUTPUT" = yes ]; then
-    FRONT="Dig Front"
-    CENTER="Dig Center"
-    SUB="Dig LFE"
-    REAR="Dig rear"
-    CTR_SUB="Dig ctr/sub"
-else
-    FRONT="Front"
-    CENTER="Center"
-    SUB="Sub"
-    REAR="Rear"
-    CTR_SUB="Ctr/sub"
-fi
-
-# Functions to enable inputs and volume controls
-
-enable_volume(){
-    INPUT=$1
-    VOLUME=$2
-
-    $DSPMGR -p"$VOLUME Vol" -l"$INPUT" -f$DSPPATH/vol_2.bin -c"Vol_L" -m"${VOLUME}_l" -c"Vol_R" -m"${VOLUME}_r"
-}
-
-enable_with_vol(){
-    INPUT=$1
-    VOLUME=$2
-
-    $DSPMGR  -a"$INPUT:$FRONT" -a"$INPUT:$REAR" -a"$INPUT:Headphones"
-    $DSPMGR -p"$VOLUME Vol" -l"$INPUT" -f$DSPPATH/vol_2.bin -c"Vol_L" -m"${VOLUME}_l" -c"Vol_R" -m"${VOLUME}_r"
-}
-
-
-# Start by clearing everything and stopping the FX8010
-$DSPMGR -x -z
-
-
-# Enable inputs (route them to the outputs) and volume controls
-
-# Pcm can be up to 6 channels
-
-$DSPMGR -a"Pcm:$FRONT" -a"Pcm Rear:$REAR" -a"Pcm ctr/sub:$CTR_SUB" -a"Pcm:Headphones"
-$DSPMGR -l"pcm" -l"Pcm Rear" -l"Pcm Ctr/sub" -f$DSPPATH/vol_pcm.bin -c"Vol_L" -m"pcm_l" -c"Vol_R" -m"pcm_r"
-
-# Other inputs are only stereo
-
-if [ "$ENABLE_CD_Spdif" = yes ]; then
-     enable_with_vol "CD-Spdif" "dig1"
-fi
-
-if [ "$ENABLE_OPTICAL_SPDIF" = yes ]; then
-    enable_with_vol "Opt. Spdif" "dig2"
-fi
-
-if [ "$ENABLE_LINE2_MIC2" = yes ]; then
-    enable_with_vol "Line2/Mic2" "line2"
-fi
-
-if [ "$ENABLE_RCA_SPDIF" = yes ]; then
-    enable_with_vol "RCA Spdif" "dig3"
-fi
-
-if [ "$ENABLE_RCA_AUX" = yes ]; then
-    enable_with_vol  "RCA Aux2" "line3"
-fi
-
-
-# Analog-in is already routed to the analog front output
-# So we route it only to the remaining outputs
-
-$DSPMGR  -a"Analog:Recording" -a"Analog:Headphones"
-
-if [ "$USE_DIGITAL_OUTPUT" = yes ]; then
-    $DSPMGR -a"Analog:Dig Front"
-fi
-
-# Output volume controls:
-enable_volume "$FRONT" "vol"
-enable_volume "$REAR" "ogain"
-enable_volume "$CTR_SUB" "igain"
-
-
-if [ "$ENABLE_TONE_CONTROL" = yes ] ; then
-
-    TONE=tone.bin
-
-    $DSPMGR -l"$FRONT L" -f$DSPPATH/$TONE -cbass -mbass -ctreble -mtreble
-    # The next 3 'inherit' the oss control of the above line:
-    $DSPMGR -l"$FRONT R" -f$DSPPATH/$TONE
-    $DSPMGR -l"$REAR R" -f$DSPPATH/$TONE
-    $DSPMGR -l"$REAR L" -f$DSPPATH/$TONE
-
-	if [ -x $AUMIX ] ; then
-		# drobbins is an audiophile and has a problem with auto-bass and
-		# auto-treble. So these have been changed from 68 to 50.
-    	$AUMIX -t 50 
-    	$AUMIX -b 50
-	fi
-fi
-
-
-# Need to toggle third output into digital mode
-
-if [ "$USE_DIGITAL_OUTPUT" = yes ] ; then
-	$CONFIG -d
-fi
-
-# See if we should enable IR
-
-if [ "$ENABLE_LIVEDRIVE_IR" = yes ] ; then
-     $CONFIG -i
-fi
-
-# for digital output we can do ac3passthrough
-# this patch must be last in the signal chain
-if [ "$USE_DIGITAL_OUTPUT" = yes ]; then
-    if [ "$AC3PASSTHROUGH" = yes ] ; then
-	$DSPMGR -l"dig front" -F"$DSPPATH/ac3pass-audigy.bin"
-    fi
-fi
-
-
-# Restart the FX8010
-$DSPMGR -y
-
-}
-
-case "$1" in
-
-	restore | restart)
-        load
-		# Load mixer settings
-		$AUMIX -f /etc/aumixrc -L  >/dev/null 2>&1 || :
-        ;;
-    save | stop)
-		# Save mixer settings
-		$AUMIX -f /etc/aumixrc -S   >/dev/null 2>&1 || :
-		;;
-    *)
-		load
-esac
-
diff --git a/media-sound/emu10k1/files/digest-emu10k1-0.20a-r5 b/media-sound/emu10k1/files/digest-emu10k1-0.20a-r5
deleted file mode 100644
index c5afcbd75a1f..000000000000
--- a/media-sound/emu10k1/files/digest-emu10k1-0.20a-r5
+++ /dev/null
@@ -1 +0,0 @@
-MD5 ffeab46e1b5ff9fd834dc78e240edf4b emu10k1-v0.20a.tar.bz2 286000
diff --git a/media-sound/emu10k1/files/digest-emu10k1-0.20a-r6 b/media-sound/emu10k1/files/digest-emu10k1-0.20a-r6
deleted file mode 100644
index c5afcbd75a1f..000000000000
--- a/media-sound/emu10k1/files/digest-emu10k1-0.20a-r6
+++ /dev/null
@@ -1 +0,0 @@
-MD5 ffeab46e1b5ff9fd834dc78e240edf4b emu10k1-v0.20a.tar.bz2 286000
diff --git a/media-sound/emu10k1/files/digest-emu10k1-0.20a-r7 b/media-sound/emu10k1/files/digest-emu10k1-0.20a-r7
deleted file mode 100644
index c5afcbd75a1f..000000000000
--- a/media-sound/emu10k1/files/digest-emu10k1-0.20a-r7
+++ /dev/null
@@ -1 +0,0 @@
-MD5 ffeab46e1b5ff9fd834dc78e240edf4b emu10k1-v0.20a.tar.bz2 286000
diff --git a/media-sound/emu10k1/files/emu10k1-0.20a-gcc3.3.patch.gz b/media-sound/emu10k1/files/emu10k1-0.20a-gcc3.3.patch.gz
deleted file mode 100644
index 9eec0561ae41..000000000000
--- a/media-sound/emu10k1/files/emu10k1-0.20a-gcc3.3.patch.gz
+++ /dev/null
diff --git a/media-sound/emu10k1/files/emu10k1-0.20a-gcc3.4.patch b/media-sound/emu10k1/files/emu10k1-0.20a-gcc3.4.patch
deleted file mode 100644
index 87f31751315b..000000000000
--- a/media-sound/emu10k1/files/emu10k1-0.20a-gcc3.4.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-diff -Naur emu10k1-v0.20a.old/utils/as10k1/as10k1.c emu10k1-v0.20a/utils/as10k1/as10k1.c
---- emu10k1-v0.20a.old/utils/as10k1/as10k1.c	2004-10-28 20:54:43.919581000 +0200
-+++ emu10k1-v0.20a/utils/as10k1/as10k1.c	2004-10-28 20:58:53.175688816 +0200
-@@ -72,7 +72,7 @@
- {
- 	int i,j;
- 	for(i=1;i<argc;i++){
--		
-+
- 		if(argv[i][0]=='-'){
- 			switch(argv[i][1]){
- 
-@@ -93,9 +93,9 @@
- 					dbg_opt=dbg_opt|DBG_INSTR;//default
- 					i--;
- 					printf(" instructions by default\n");
--					goto next_cli_arg;
-+					continue;
- 				}
--				
-+
- 				while(argv[i][j]!='\0'){
- 						
- 					switch(argv[i][j]){
-@@ -161,8 +161,6 @@
- 			}
- 
- 		}
--next_cli_arg:
--
- 	}
- }
- 
-diff -Naur emu10k1-v0.20a.old/utils/mixer/lib/file.c emu10k1-v0.20a/utils/mixer/lib/file.c
---- emu10k1-v0.20a.old/utils/mixer/lib/file.c	2002-02-25 09:33:30.000000000 +0100
-+++ emu10k1-v0.20a/utils/mixer/lib/file.c	2004-10-28 20:57:12.673967400 +0200
-@@ -441,14 +441,21 @@
- 		list= &mgr->ipatch_list;
- 		/* only load a patch if there is a route connecting it */
- 		for(i=0;i<num_in;i++){
-+			char do_continue = 0;
-+
- 			set_bit(input[i], &patch->input);
- 			set_bit(output[i], &patch->output);
- 			
- 			for (j = 0; j < DSP_NUM_OUTPUTS; j++)
- 				if ( test_bit(input[i], &mgr->rpatch.route_v[j]) || test_bit(input[i], &mgr->rpatch.route[j])  ) 
--					goto match1;
-+				{
-+					do_continue = 1;
-+					break;
-+				}
-+
-+			if (do_continue) continue;
-+
- 			goto err2;
--match1:
- 		}
- 		goto match;
- 	}else{
diff --git a/media-sound/emu10k1/files/emu10k1-script b/media-sound/emu10k1/files/emu10k1-script
deleted file mode 100644
index 4aba311ec630..000000000000
--- a/media-sound/emu10k1/files/emu10k1-script
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/bin/bash
-
-source /sbin/functions.sh
-source /etc/emu10k1.conf
-
-# setup regex strings to match
-AUDIGY_PCI_TAG="multimedia audio controller: creative labs.*audigy"
-EMU10K1_PCI_TAG="multimedia audio controller: creative labs.*emu10k1"
-
-# first, lets try to read the driver information in /proc/driver/
-proc="`ls /proc/driver/emu10k1/*/info 2> /dev/null | awk '{print $1}'`"
-if [ -z "${CARD_TYPE}" ] && [ ! -z "${proc}" ] && [ -e ${proc} ] ; then
-	if [ -n "$(egrep -i '^card type.*audigy.*' ${proc})" ] ; then
-		CARD_TYPE="audigy"
-	elif [ -n "$(egrep -i '^card type.*emu10k1.*' ${proc})" ] ; then
-		CARD_TYPE="emu"
-	fi
-fi
-
-# if that didnt work, try to detect via lspci (sys-apps/pciutils)
-if [ -z "${CARD_TYPE}" ] && [ -x /sbin/lspci ] ; then
-echo 1
-	if [ -n "$(lspci | egrep -i "${AUDIGY_PCI_TAG}")" ] ; then
-		CARD_TYPE="audigy"
-	elif [ -n "$(lspci | egrep -i "${EMU10K1_PCI_TAG}")" ] ; then
-		CARD_TYPE="emu"
-	fi
-fi
-
-# if that didnt work, lets try via the kernel's /proc/pci interface
-if [ -z "${CARD_TYPE}" ] && [ -e /proc/pci ] ; then
-	if [ -n "$(egrep -i "${AUDIGY_PCI_TAG}" /proc/pci)" ] ; then
-		CARD_TYPE="audigy"
-	elif [ -n "$(egrep -i "${EMU10K1_PCI_TAG}" /proc/pci)" ] ; then
-		CARD_TYPE="emu"
-	fi
-fi
-
-# if that failed, make the user tell us what it is
-case "`echo ${CARD_TYPE} | awk '{print toupper($1)}'`" in
-	AUDIGY)
-		/usr/bin/audigy-script $@
-		;;
-	EMU)
-		/usr/bin/emu-script $@
-		;;
-	*)
-		eerror "I was unable to figure out whether you have an Audigy"
-		eerror "or an Emu10k1 sound card.  Further more, you have not"
-		eerror "told me what kind of sound card you have."
-		eerror "Please edit /etc/emu10k1.conf and set the CARD_TYPE"
-		eerror "variable.  You will find it at the top of the file."
-		exit 1
-		;;
-esac
diff --git a/media-sound/emu10k1/files/emu10k1.conf-gentoo-header b/media-sound/emu10k1/files/emu10k1.conf-gentoo-header
deleted file mode 100644
index 20710ecdf74e..000000000000
--- a/media-sound/emu10k1/files/emu10k1.conf-gentoo-header
+++ /dev/null
@@ -1,15 +0,0 @@
-# Set your card type on the next line so that loading the
-# kernel module works correctly.
-#
-# Accepted values are 'emu' and 'audigy'
-#  use 'audigy' if you have an audigy based sound card,
-#  otherwise use 'emu'
-#
-# Note: you should only have to set this if:
-#    (1) the auto-detect script fails
-#        - no lspci support
-#        - no /proc/pci support
-#        - the kernel just plain doesn't like you
-#    (2) you like to set everything
-#CARD_TYPE="set_me"
-
diff --git a/media-sound/emu10k1/files/modules-emu10k1 b/media-sound/emu10k1/files/modules-emu10k1
deleted file mode 100644
index d2beec537e63..000000000000
--- a/media-sound/emu10k1/files/modules-emu10k1
+++ /dev/null
@@ -1,2 +0,0 @@
-post-install emu10k1 /usr/bin/emu10k1-script restore
-pre-remove emu10k1 /usr/bin/emu10k1-script save