mail-mta/exim: remove unused patches

Signed-off-by: Fabian Groffen <grobian@gentoo.org>

5 files changed, 0 insertions, 302 deletions

diff --git a/mail-mta/exim/files/exim-4.89-CVE-2017-1000369.patch b/mail-mta/exim/files/exim-4.89-CVE-2017-1000369.patch
deleted file mode 100644
index c3d976a2b907..000000000000
--- a/mail-mta/exim/files/exim-4.89-CVE-2017-1000369.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-CVE-2017-1000369
-
-https://github.com/Exim/exim/commit/65e061b76867a9ea7aeeb535341b790b90ae6c21
-
---- a/doc/exim.8
-+++ b/doc/exim.8
-@@ -1350,7 +1350,7 @@ option sets the received protocol value that is stored in
- or \fB\-bs\fP is used. For \fB\-bh\fP, the protocol is forced to one of the standard
- SMTP protocol names. For \fB\-bs\fP, the protocol is always "local\-" followed by
- one of those same names. For \fB\-bS\fP (batched SMTP) however, the protocol can
--be set by \fB\-oMr\fP.
-+be set by \fB\-oMr\fP. Repeated use of this option is not supported.
- .TP 10
- \fB\-oMs\fP <\fIhost name\fP>
- See \fB\-oMa\fP above for general remarks about the \fB\-oM\fP options. The \fB\-oMs\fP
-@@ -1418,6 +1418,7 @@ host name and its colon can be omitted when only the protocol is to be set.
- Note the Exim already has two private options, \fB\-pd\fP and \fB\-ps\fP, that refer
- to embedded Perl. It is therefore impossible to set a protocol value of d
- or s using this option (but that does not seem a real limitation).
-+Repeated use of this option is not supported.
- .TP 10
- \fB\-q\fP
- This option is normally restricted to admin users. However, there is a
---- a/src/exim.c
-+++ b/src/exim.c
-@@ -3092,7 +3092,14 @@ for (i = 1; i < argc; i++)
- 
-       /* -oMr: Received protocol */
- 
--      else if (Ustrcmp(argrest, "Mr") == 0) received_protocol = argv[++i];
-+      else if (Ustrcmp(argrest, "Mr") == 0)
-+
-+        if (received_protocol)
-+          {
-+          fprintf(stderr, "received_protocol is set already\n");
-+          exit(EXIT_FAILURE);
-+          }
-+        else received_protocol = argv[++i];
- 
-       /* -oMs: Set sender host name */
- 
-@@ -3188,7 +3195,15 @@ for (i = 1; i < argc; i++)
- 
-     if (*argrest != 0)
-       {
--      uschar *hn = Ustrchr(argrest, ':');
-+      uschar *hn;
-+
-+      if (received_protocol)
-+        {
-+        fprintf(stderr, "received_protocol is set already\n");
-+        exit(EXIT_FAILURE);
-+        }
-+
-+      hn = Ustrchr(argrest, ':');
-       if (hn == NULL)
-         {
-         received_protocol = argrest;
diff --git a/mail-mta/exim/files/exim-4.89-CVE-2017-16943.patch b/mail-mta/exim/files/exim-4.89-CVE-2017-16943.patch
deleted file mode 100644
index b864ffa5ad17..000000000000
--- a/mail-mta/exim/files/exim-4.89-CVE-2017-16943.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 4e6ae6235c68de243b1c2419027472d7659aa2b4 Mon Sep 17 00:00:00 2001
-From: Jeremy Harris <jgh146exb@wizmail.org>
-Date: Fri, 24 Nov 2017 20:22:33 +0000
-Subject: [PATCH] Avoid release of store if there have been later allocations. 
- Bug 2199
-
----
- src/src/receive.c | 7 ++++---
- 1 file changed, 4 insertions(+), 3 deletions(-)
-
-diff --git a/src/src/receive.c b/src/src/receive.c
-index e7e518a..d9b5001 100644
---- a/src/src/receive.c
-+++ b/src/src/receive.c
-@@ -1810,8 +1810,8 @@ for (;;)
-   (and sometimes lunatic messages can have ones that are 100s of K long) we
-   call store_release() for strings that have been copied - if the string is at
-   the start of a block (and therefore the only thing in it, because we aren't
--  doing any other gets), the block gets freed. We can only do this because we
--  know there are no other calls to store_get() going on. */
-+  doing any other gets), the block gets freed. We can only do this release if
-+  there were no allocations since the once that we want to free. */
- 
-   if (ptr >= header_size - 4)
-     {
-@@ -1820,9 +1820,10 @@ for (;;)
-     header_size *= 2;
-     if (!store_extend(next->text, oldsize, header_size))
-       {
-+      BOOL release_ok = store_last_get[store_pool] == next->text;
-       uschar *newtext = store_get(header_size);
-       memcpy(newtext, next->text, ptr);
--      store_release(next->text);
-+      if (release_ok) store_release(next->text);
-       next->text = newtext;
-       }
-     }
--- 
-1.9.1
-
diff --git a/mail-mta/exim/files/exim-4.89-CVE-2017-16944.patch b/mail-mta/exim/files/exim-4.89-CVE-2017-16944.patch
deleted file mode 100644
index 285a6170aa82..000000000000
--- a/mail-mta/exim/files/exim-4.89-CVE-2017-16944.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 178ecb70987f024f0e775d87c2f8b2cf587dd542 Mon Sep 17 00:00:00 2001
-From: "Heiko Schlittermann (HS12-RIPE)" <hs@schlittermann.de>
-Date: Mon, 27 Nov 2017 22:42:33 +0100
-Subject: [PATCH] Chunking: do not treat the first lonely dot special.
- CVE-2017-16944, Bug 2201
-
-Modified to apply on 4.89-gentoo
-
----
- src/src/receive.c | 2 +-
- src/src/smtp_in.c | 7 +++++++
- 2 files changed, 8 insertions(+), 1 deletion(-)
-
-diff --git a/src/src/receive.c b/src/src/receive.c
-index 541eba1..417e975 100644
---- a/src/src/receive.c
-+++ b/src/src/receive.c
-@@ -1865,7 +1865,7 @@ for (;;)
-   prevent further reading), and break out of the loop, having freed the
-   empty header, and set next = NULL to indicate no data line. */
- 
--  if (ptr == 0 && ch == '.' && (smtp_input || dot_ends))
-+  if (ptr == 0 && ch == '.' && dot_ends)
-     {
-     ch = (receive_getc)(GETC_BUFFER_UNLIMITED);
-     if (ch == '\r')
-diff --git a/src/src/smtp_in.c b/src/src/smtp_in.c
-index 1fdb705..0aabc53 100644
---- a/src/src/smtp_in.c
-+++ b/src/src/smtp_in.c
-@@ -5094,16 +5094,23 @@ while (done <= 0)
-       DEBUG(D_receive) debug_printf("chunking state %d, %d bytes\n",
- 				    (int)chunking_state, chunking_data_left);
- 
-+      /* push the current receive_* function on the "stack", and
-+      replace them by bdat_getc(), which in turn will use the lwr_receive_*
-+      functions to do the dirty work. */
-       lwr_receive_getc = receive_getc;
-       lwr_receive_ungetc = receive_ungetc;
-+
-       receive_getc = bdat_getc;
-       receive_ungetc = bdat_ungetc;
- 
-+      dot_ends = FALSE;
-+
-       goto DATA_BDAT;
-       }
- 
-     case DATA_CMD:
-     HAD(SCH_DATA);
-+    dot_ends = TRUE;
- 
-     DATA_BDAT:		/* Common code for DATA and BDAT */
-     if (!discarded && recipients_count <= 0)
--- 
-1.9.1
-
diff --git a/mail-mta/exim/files/exim-4.89-address-expando-crash.patch b/mail-mta/exim/files/exim-4.89-address-expando-crash.patch
deleted file mode 100644
index 2a868490a426..000000000000
--- a/mail-mta/exim/files/exim-4.89-address-expando-crash.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-ignoring parts which don't match due to repo reorg post release
-
-From 1b7cf216d933b395dee691f05becca4dd44b26f7 Mon Sep 17 00:00:00 2001
-From: "Heiko Schlittermann (HS12-RIPE)" <hs@schlittermann.de>
-Date: Wed, 4 Oct 2017 22:25:45 +0200
-Subject: [PATCH] Check for proper output separator in expanding
- ${addresses:STRING}    (Closes 2171)
-
-Better yet would be to force setting the output separator literally,
-and not after expansion of the STRING. But this would be an incompatible
-change.
----
- doc/doc-docbook/spec.xfpt    | 10 +++++++++-
- src/src/expand.c             |  8 +++++++-
- test/scripts/0000-Basic/0002 |  1 +
- test/stdout/0002             |  1 +
- 4 files changed, 18 insertions(+), 2 deletions(-)
-
-ignored - diff --git a/doc/doc-docbook/spec.xfpt b/doc/doc-docbook/spec.xfpt
-ignored - index 4a8e1d0..c140945 100644
-ignored - --- a/doc/doc-docbook/spec.xfpt
-ignored - +++ b/doc/doc-docbook/spec.xfpt
-ignored - @@ -10118,7 +10118,15 @@ character. For example:
-ignored -  .code
-ignored -  ${addresses:>& Chief <ceo@up.stairs>, sec@base.ment (dogsbody)}
-ignored -  .endd
-ignored - -expands to &`ceo@up.stairs&&sec@base.ment`&. Compare the &*address*& (singular)
-ignored - +expands to &`ceo@up.stairs&&sec@base.ment`&. The string is expanded
-ignored - +first, so if the expanded string starts with >, it may change the output
-ignored - +separator unintentionally. This can be avoided by setting the output
-ignored - +separator explicitly:
-ignored - +.code
-ignored - +${addresses:>:$h_from:}
-ignored - +.endd
-ignored - +
-ignored - +Compare the &*address*& (singular)
-ignored -  expansion item, which extracts the working address from a single RFC2822
-ignored -  address. See the &*filter*&, &*map*&, and &*reduce*& items for ways of
-ignored -  processing lists.
-diff --git a/src/src/expand.c b/src/src/expand.c
-index 353b8ea..67b3d65 100644
---- a/src/src/expand.c
-+++ b/src/src/expand.c
-@@ -6797,7 +6797,13 @@ while (*s != 0)
-         int start, end, domain;  /* Not really used */
- 
-         while (isspace(*sub)) sub++;
--        if (*sub == '>') { *outsep = *++sub; ++sub; }
-+        if (*sub == '>')
-+          if (*outsep = *++sub) ++sub;
-+          else {
-+            expand_string_message = string_sprintf("output separator "
-+              "missing in expanding ${addresses:%s}", --sub);
-+            goto EXPAND_FAILED;
-+          }
-         parse_allow_group = TRUE;
- 
-         for (;;)
-ignored - diff --git a/test/scripts/0000-Basic/0002 b/test/scripts/0000-Basic/0002
-ignored - index cb0bb18..dd9cea2 100644
-ignored - --- a/test/scripts/0000-Basic/0002
-ignored - +++ b/test/scripts/0000-Basic/0002
-ignored - @@ -133,6 +133,7 @@ addresses: ${addresses:>+ Exim Person <local-part@dom.ain> (that's me),\
-ignored -  addresses: ${addresses:Exim Person <local-part@dom.ain> (that's me), \
-ignored -             xyz@abc, nullgroupname:;, group: p@q, r@s; }
-ignored -  addresses: ${addresses:local-part@dom.ain <local-part@dom.ain>}
-ignored - +addresses: ${addresses:>}
-ignored -  
-ignored -  escape:     ${escape:B7·F2ò}
-ignored -  excape8bit: ${escape8bit:undisturbed text\ttab\nnewline\ttab\\backslash \176tilde\177DEL\200\x81.}
-ignored - diff --git a/test/stdout/0002 b/test/stdout/0002
-ignored - index 5593f06..1422289 100644
-ignored - --- a/test/stdout/0002
-ignored - +++ b/test/stdout/0002
-ignored - @@ -123,6 +123,7 @@
-ignored -  > addresses: local-part@dom.ain+xyz@abc
-ignored -  > addresses: local-part@dom.ain:xyz@abc:p@q:r@s
-ignored -  > addresses: 
-ignored - +> Failed: output separator missing in expanding ${addresses:>}
-ignored -  > 
-ignored -  > escape:     B7\267F2\362
-ignored -  > excape8bit: undisturbed text	tab
--- 
-1.9.1
-
diff --git a/mail-mta/exim/files/exim-4.89-transport-crash.patch b/mail-mta/exim/files/exim-4.89-transport-crash.patch
deleted file mode 100644
index 94a1d6b15525..000000000000
--- a/mail-mta/exim/files/exim-4.89-transport-crash.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-This is a manual backport of the following commit which fixes the
-original bug as well as https://bugs.exim.org/show_bug.cgi?id=2166:
-
-From e69636bc9ddf3617be688b07941d7d659d50eaa7 Mon Sep 17 00:00:00 2001
-From: Jeremy Harris <jgh146exb@wizmail.org>
-Date: Sat, 3 Jun 2017 13:39:18 +0100
-Subject: [PATCH 1/1] Fix crash in transport, on second smtp-connect fail for a
- list of target hosts
-
-Reported as the sequence:
-  1MX: 554 on connect (banner)
-  2MX: TCP conn timeout
-
-diff --git a/src/src/transports/smtp.c b/src/src/transports/smtp.c
-index 454c0f7..dc9e03b 100644
---- a/src/src/transports/smtp.c
-+++ b/src/src/transports/smtp.c
-@@ -2177,25 +2177,34 @@ return OK;
- 
-   /* The failure happened while setting up the call; see if the failure was
-   a 5xx response (this will either be on connection, or following HELO - a 5xx
--  after EHLO causes it to try HELO). If so, fail all addresses, as this host is
--  never going to accept them. For other errors during setting up (timeouts or
--  whatever), defer all addresses, and yield DEFER, so that the host is not
--  tried again for a while. */
-+  after EHLO causes it to try HELO). If so, and there are no more hosts to try,
-+  fail all addresses, as this host is never going to accept them. For other
-+  errors during setting up (timeouts or whatever), defer all addresses, and
-+  yield DEFER, so that the host is not tried again for a while.
-+
-+  XXX This peeking for another host feels like a layering violation. We want
-+  to note the host as unusable, but down here we shouldn't know if this was
-+  the last host to try for the addr(list).  Perhaps the upper layer should be
-+  the one to do set_errno() ?  The problem is that currently the addr is where
-+  errno etc. are stashed, but until we run out of hosts to try the errors are
-+  host-specific.  Maybe we should enhance the host_item definition? */
- 
- FAILED:
-   sx->ok = FALSE;                /* For when reached by GOTO */
--
--  yield = code == '5'
-+  set_errno(sx->addrlist, errno, message,
-+	    sx->host->next
-+	    ? DEFER
-+	    : code == '5'
- #ifdef SUPPORT_I18N
--	  || errno == ERRNO_UTF8_FWD
-+			|| errno == ERRNO_UTF8_FWD
- #endif
--    ? FAIL : DEFER;
--
--  set_errno(sx->addrlist, errno, message, yield, pass_message, sx->host
-+	    ? FAIL : DEFER,
-+	    pass_message, sx->host
- #ifdef EXPERIMENTAL_DSN_INFO
- 	    , sx->smtp_greeting, sx->helo_response
- #endif
- 	    );
-+  yield = DEFER;
-   }
- 
-